max s used for sale

Power: 500 kVA / 400 kW Diesel engine / type: VOLVO / TAD 1631 GE Cylinders: number 6 Cooling: liquid-cooled Generator / type: MECC ALTE / ECN 40 SC/4 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20 container Tank: 1000 liters Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24V Generator switch: Yes Power switch: Yes Automatic: Kuhse Dimensions (L X W X H): approx. 6100 x 2340 x 2380 mm Weight: approx. 9000 kg

Power: 2000 kVA / 1600 kW Diesel engine: MTU 16V 396 TB34D Cylinder: V 16 Cooling: liquid-cooled Builder: A.v.Kaick DIDBN 130/125 h/4 Voltage: 400 / 230 V or 10 kV Frequency: 50 Hz Speed: 1500 min-1 type: 2pcs 40´ containers Tank: 4000 litres Switchgear / Starter device: Yes Battery voltage / capacity: 24 V Generator switch: Yes Power switch: Yes Automatic: Yes Dimensions (L X W X H): approximately 12020 x 2500 x 5800 mm Weight: approx. 30 t Year of constr.: 1996 (aggregate)

Continuous power: 310 kW / 248 kW Diesel engine: Iveco 8281 SI 15, code: 939520 Cylinders: 8 Cooling: Liquid-cooled Builder: A. v. Kaick DKB 80/400-4TS, no.: 5384135 Voltage: 400 V Frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20' container Accessories: tank: 1000 l Switchgear / Starter: automatic switchgear, Kuhse KEA 071 Battery voltage / capacity: 24 V Dimensions (L X W X H): 150 x 2480 x 2380mm Weight: 9 tons

Power: 400 V (50 Hz): 650 kVA / 520 kW or 440 V (60 Hz): 750 kVA / kW 600 Possible total power when interconnected: 2600 kVA / 2080 kW or kVA 3000 / 2400 kW Diesel engine / type: MAN 2842 LE 211 Cylinder: V 12 Cooling: liquid-cooled Generator / type / Nr.: Marelli, MJB 355 MA/5 Voltage: 231 / 400 V up to 10 kV Frequency: 50 / 60 Hz Speed: 1500 / 1800 Type: in 20´ container Tank: 800 LTR. Switchgear / Starter: automatic switchgear Battery voltage / capacity: 24 V Generator switch: Yes Automatic: Symap Dimensions (L X W X H): 6058 x 2438 x 2591

Power: 690 kW / 552 kW Four-stroke diesel engine / type / Nr: Deutz MWM TBD 234 V16 No. 234.16.01156 Cylinders: V16 Cooling: E cooler Generator / type / Nr.: Marelli MX 400 SCI 4 No. MS-1003 Voltage: 400V Frequency: 50 HZ Speed: 1500 rpm Type: Complete unit on base frame in 40' container Tank: 1500 LTR. Switchgear / Starter: Automatic switchgear / electric start Battery voltage / capacity: 24V Generator switch: Yes Power switch: No Auto: Yes (Symap ECG), mains parallel operation Dimensions (L X W X H): 40' container Weight: approx. 18 t

Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.

Large items of office furniture includes: -Tables and cabinets made of wood -Tables and cabinets made of steel/plastic In very good condition!

Used batch evaporator for jam production, capacity 680 L, working capacity: 300 liters, made by Spomasz Pleszew, type WWA 20. New 1991. Operating pressure 0.3 MPa, design temperature 133 ° C. Weight 1030 kg.

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

Propeller agitator Manufacturer: Stelzer Type: propeller agitator Wave length: 64 cm In very good condition!

Propeller agitator Manufacturer: Stelzer Type: propeller agitator Technical data: Engine power: 11 kW Speed: 1.450 U/min Frequency: 50 Hz Wave length: 60 cm Shaft diameter: approx. 6 cm In very good condition!

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

Make: HIROSS Type: SLO920D02200X Power: 95 kW refrigerant: R407C 2 pcs. compressor Maneurop Compressor type: SZ175S4RA Price on request

Producer: Servotech 250 mm Description: Servotech (Brand new) -Throat diameter 250 mm -Output 5000 - 10000 kg/h -One speed motor -Full power 37 kw -External dimensions: 2070 mm x 1070 mm x 1685 mm -Hopper capacity aprox 300 l -Total wiegth 1500 kg -Machine is fully made of stinless steel -Mixing /grinding temperature to -15°C -Two sets of knives; one for frozen, and one for fresh meat.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

130 lfm shelf shepherd type R3000 Used goods, as good as new, see pictures Height 2.5 m Depth 80 cm Load/compartment 250 kg Field width approx.128 cm Negotiation price: € 14,660,-- net from stock Offer consists of: 101 pcs. stand or frame, 2.5 m, galvanized 600 pcs shelves, 250 kg load/compartment, galvanized 34 St. Cross Associations for Stiffening. 6 levels per field (several are of course possible at an extra cost) Also available with a field width of 100 cm! Other compilations possible. Heights 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms ...

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Used monoblock made by Parmatec-Stillfill, model 20-20-5, new 2000, yield 6500 bottles/h-1,5l; 5400 bottles/h-2l, Dimensions: 3300mm x 3300m, with feeder caps TZGh 01, year 1997, the dimensions of 2500mm x 1400mm x 2400mm

30 lfm shelf shepherd type R3000 Used goods, as good as new, see pictures Height 2.5 m Depth 80 cm Load/compartment 250 kg Field width approx.128 cm Negotiation price: € 3,520,-- net from stock Offer consists of: 24 pcs stand or frame, 2.5 m, galvanized 144 pcs shelves, 250 kg load/compartment, galvanized 9 St. Cross Associations for Stiffening. 6 levels per field (several are of course possible at an extra cost) Also available with a field width of 100 cm! Other compilations possible. Heights 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and ...

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

COMPLETE PANCAKE LINE for the production of plain, cherry, apple, pineap-ple, etc. pancakes Very little used, only 3 weeks in test production After that the management decided to invest more in existing pizza line and cancelled new products pancakes Pancakes 32g ø 80mm (According to pre-owner) â?¢ SCHENK T4096-5035-8 V1.0 contact fryer For baking of dough or meat products competely stainless steel, electrical heating, total length 11 m turning station, complete with 2 DáBáR TSA 800 fat spraying units 22 noz-zles, only used for testing purposes, like new â?¢ ALIMEC DOSATRICE dosage unit Closed for dough with 22 dosing heads with a max. dosing weight of 36 g per dosing head, only used for testing purposes, like new â?¢ MONDINI DTT/LC80 Dosing line for fruit pieces, 22 dosing heads, only used for testing purposes, like new â?¢ 2 DOMINO transport trolley ...

2pcs 3500 x 2000 x 350 mm price 7000eur/pc

4 pcs 5600 x 1885 x 400 mm price 10500eur/pc

Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3

New lathe. Distance between centers: 1500mm. Swing: 510mm. Swing over carriage: 320mm. Swing over gap: 760mm. Spindle hole: 80mm. CE protections and certificate. Equipped with chuck and steady rest.

Alfa Laval nozzle separated including cabinet, 2000, drive 135 kW. Technical specification Max throughput capacity 170 m3/h maximum nozzle flow 65 m3/h feed temperature range 0-100 o C Feed inlet pressure required Max180 kPa installed motor power 135

Robot Kuka KR6 SafeRobot version (very little operating hours) Built in 2007 Reach 1611mm weight 235kg payload 6kg control KRC2 ed05 weight 185kg Software version V5. 4.11 Language Windows XP Teachpendant KUKA KCP2 ed05 Connection cables 7 m / 15 m .

Used pneumatic press for cheese made by Spomasz Rzeszow. New 2006. Available 2 pcs.

used approx. 15 m ³ / 15,000 liter tank of polyester / GRP tank above ground, lying, good condition Dimensions: Ø 2.40 m x approx. 3.80 m long lying tank dome on the top of the tank, multiple connections,-, spouts, etc. The container can be a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rain collection tank, AHL / ASL, etc are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

Robot Kuka KR16L6 SafeRobot version (very little operating hours) Built in 2007 Reach 1911mm weight 240kg load 16kg control KRC2 ed05 weight 185kg Software version V5. 4.11 Language Windows XP Teachpendant KUKA KCP2 ed05 Connection cables 7 m / 15 m .

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: Spörk Condition: good (used) Power: see type plate/ motor data <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, slanted rollers or telescopic phones for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-effectively and susta ...

Producer: Sorgo Description: -Sorgo Smokehouses -One room for two trolleys -One main door -Powered by steam -Dimensions; 1450 mm x 2480 mm x 2700 mm -Higth needed to install 3100 mm -Total weight 1380 kg -Steam conection: 2-4 bar -Water conection: 4 bar -Air conection: 6 bar/40l/h -Electric conection; 3/MP, 50 Hz, 380 V, 220 V -Smoke generator dimensions; 1350 x 450 x1100 -Work options; drying, cooking, cooling, smoking, infusing -Seting control by mikroprocesor Mikster (brand new) with warranty -In excelent condition 2 machines available.

Power: 250 kVA / 200 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / 101801/38 Cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AEG / SJRJ 80e/4 d / 806129 Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 rpm Design: soundproofed canopy Tank: approx. 720 l Switchgear / Starter: Automatic with no brake return / electrical Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: DEIF, type BGC 108 Dimensions (L X W X H): Approx. 4000 x 2500 x 2500 mm Year of manufacure: 1972, built into canopy 2016

for the production of products cast in moulds, such as chocolate bars, bars, etc. Accessories unit for SELMI Temper TOP EX only 1 year in production

Power: 450kVA / 360 KW Diesel engine (four-stroke) / type / no.: IVECO 8281 SRI 2709 / 509102 Cylinders: 8 V Cooling: water cooled Alternator / type / no.: Leroy Somer 47.1 L9 C6/4 / FJ092825/01 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

Packing machine of the SIG type HBS With a Siemens S7 control If you have questions you can me any time call. Phone: 0049 1718367957 Mobile phone: 0049 1718367957

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

Muller Martini Chain for saddle stitchers

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

Manufacturer: Hassia Type: Redatron The packaging machine is designed a vertical hose bag packaging machine for continuous operation. 60 packages per minute Size of packaging: maximum length: 400 mm maximum width 200mm optionally with euro hole tear-open thread 3 x 380 V 220 V 50 Hz

used 50 m³ / 50.000 litres polyester tank / GRP tank good condition, with chemical protective layer from the inside, above ground, on ring base. dimensions: Ø 3,0 m x approx. 7.80 m high very thick walls, dome on top of the tank body, several connections above, incl. suction line inside and lower outlet The container can be used as storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, canola oil, AHL/ASL, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More inf ...

Complete brewery brewhouse 500 l / 6 fermentation tanks

Used approx. 6 m³ / 6,000 litre polyester tank, GRP tank, standing vertically, with flat bottom, above ground - good condition (Staffelstein tank). The tank is in good condition, having stood in the a hall. Dimensions: approx. Ø 2.1 m x 2.70 m high. Standing flat bottomed tank, with multiple connections and spouts, DOM suitable. The container can be used as a storage tank for water, liquid feed, manure, AHL, ASL, whey, potato steam skins, molasses, stillage, seeping juice, canola oil, palm oil, as a rain collection tank, firefighting water tank, water cistern, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. ...

Used approx. 30 m³ / 30,000 litres polyester tank, fiberglass tank (manufacturer Speidel), very good condition. dimensions: Ø 3.00 m x 4.60 m high aboveground standing flat bottomed tank, dome on the tank body, multiple connections, including V2A / stainless steel filling line. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, canola oil, AHL/ASL or as rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: ...