max muller used for sale

75.0 kW, max. 7.50 bar, 13.80 m3/min. condition as new.

75,0 kW, max. 7,50 bar, 13,80 m3/min. Condition like new.

132.0 kW, max. 9.0 bar, 22.90 m3/min. With energy recovery. Condition as new.

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

132,0 kW, max. 9,0 bar, 22,90 m3/min. With energy recovery. Condition like new.

max. 16.0 bar, 65.0 m3/min. caelte agent R 404a.

max. 16,0 bar, 65,0 m3/min. Refrigerant R 404a.

160 kW, max. 7.50 bar, 30.30 m3/min. With built-in compressed air dryer.

Working length: 1020 mm Maximum sheet thickness: 2.5 mm Maximum opening width: 48 mm Bending angle: 0-135 ° Width: 1350 mm Overall width: 820 mm Height: 1140 mm Approximate weight: 285 kg FEATURES -Universal bending machine for sheet metal working and repairers -Sturdy construction in modern design -Easy adjustment of the upper beam by means of foot pedal, hands are free for the workpiece - manual bending machine for standard bending tasks -Segmented clamping beam for a large number of bending possibilities -Optimum price-performance ratio -Faster and easier bending operation via handle -Non-slip rubber coating on the foot pedal for safe working -Easy adjustment of the lower beam on the corresponding thickness -High upper beam for the manufacture of highly bent profiles Action price, including free home delivery to 1 address Germany (Mainland)

160 kW, max. 7,50 bar, 30,30 m3/min. With built-in compressed-air dryer.

315 kW, max. 10.0 bar, 41.20 m3/min. oil-free, water-free. Voltage 3300V, 3ph, 50 Hz. New control electronics Mk4.

315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.

Mfc.: KALLFAS Type: Universa 8060/200 Special Buit: 1996 Power: 21 kW, 400 V, 3 ph., 50 Hz, 58 Amps. Automatic L-Bar sealer – pneumatic - continuous heated system Package size: 800 mm wide x 600 mm deep x 100 mm tall (31-7/16 x 23-1/2 x 3-7/8) Admission height dealer frame: approx. 200 mm Packaged product length max.: approx. 750 mm Transportation product width entry/exit: 500 / 560 mm Speed control by infinitely variable inverter Foil: Center folded film – printed or neutral – up to 60 microns Foil roll dia.: max. 400 mm Foil width: 800 mm Foil overlapping: min. approx. 50 mm max. approx. 100 mm Working height adjustable: 850 – 915 mm Capacity: 30 cycles / min.

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

90.0 kW, max. 9.0 bar, 14.39 m3/min. In very good condition.

160.0 kW, max. 7.50 bar, 22.70 m3/min. oil-free, air-cooled

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

160,0 kW, max. 7,50 bar, 22,70 m3/min. Oil-free, air cooled

Dimensions (HxWxD) 1290 x 1345 x 700 mm Temperature Range +2 to +10 °C Serving area 540 mm wide Display area internally illuminated Fits 10 x GN 1/4 - 150 mm deep gatronorm pans (not included) Doors: 2, Weight 137 KG Refrigerant R134A Maximum Ambient temperature 43°C High grade AISI 304 stainless steel interior and exterior One 1/1 gastronorm shelf supplied per door - 2 shelves in total Internal corners rounded for easy cleaning Adjustable legs Replaceable gaskets Pan Capacity: 10 x 1/4 GN Pans Accepts gastronorm pans up to 150mm deep (not included) Fan assisted cooling Automatic defrost Epoxy coated evaporator KIOUR controller with temp display 13 amp supply Electronic controller fitted Right handed motors Ex Works Price does not include VAT. Inspection of the machine will be scheduled at least 24 hrs in advance. We speak English. Wir sprechen Deutsch. (+ ...

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

75.0 kW, max. 7.50 bar, 12.90 m3/min.

75,0 kW, max. 7,50 bar, 12,90 m3/min.

Specifications (manufacturer): -Manufacturer: Miele / Germany -Model/type: T 6250 - Fabrikationsnr.: 25375347 -Part No.: 52625001 -Built in _ -electrical connection: 3 ~ 380V 50 Hz 10.0 A -electric power consumption approx. 14.30 kW -Re circulation dryer exhaust air recirculation with automatic reversing system -Drying capacity: 10 kg in 35 min cupboard dry -electronic measurement of residual moisture -large filter with optical display -Crease protection -Capacity dry: 10 kg / filling ratio 1:25 / 1:20 -Evaporation performance max 13,5 L / h -2 Motors (drive and blower) -Drum capacity: 250 L -Heating capacity: 13, 5kw switchable to 9kw -Exhaust air connection 150 mm -Dimensions (Lxwxh): approx. 900 x 805 x 1390mm -Weight 147 kg

Cat. No. 07-1260 in very good condition Capacity: 35 cubic meters/h at 6.3 bar = 63 m water column Dimensions: Length: 120 cm Width: 48 cm Height: 48 cm Pump diagnostics: Pressure test: 4 bar Suction capacity: - 1.5 bar to -0.1 bar Pressure: 5.1 bar Power: 370 l/min., 22200 l/h Ampere min./max.: 16.5 6 bar DN 65 15 kW For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

75.0 kW, max. 7.50 bar, 13.80 m3/min.

132 kW, max. 10 bar, 18.3 m3/min. oil-free, water-covered

132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled

CNC plasma and cutting machine SATO SATRONIK FB 2000 2,000 x 4,400 mm plasma system Kjellberg HiFocus 100, (up to 25 mm quality cut), cutting max. 40 mm, 12 mm laser cutting quality, plasma burner PerCut 170 (quick change system), THC / automatic capacitive. Hoehenregulation with Kemper suction firing table 1.5 ( 2m) x 4.0 m and suction and filter unit Price: VB The plant is located at the Bochum plant Alternative plasma cutting plant Kjellberg FineFocus 800: plasma cutting system for attachment/re-training of CNC plasma cutting systems FineFocus 800 Plus Materialstaerke: up to 80 mm, Hole cutting and quality cutting up to 45 - 50 mm, gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Price option with gas console, mac ...

1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...

Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960

160 kW, max. 10 bar, 25.10 m3/min.

160 kW, max. 10 bar, 25,10 m3/min.

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

75 kW, max. 10 bar, 11 m3/min. 2 pcs. available!

75 kW, max. 10 bar, 11 m3/min. 2 pieces available.

90 kW, max. 8 bar, 14.98 m3/min.

90 kW, max. 8 bar, 14,98 m3/min.

400 kW, max. 8 bar, 61.32 m3/min. oil-free, water-free. Screw elements have 16000 working hours.

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

Machine type: ESAB SXE-P-5000 NC/-CNC type: CNC version 52 Year of construction: 1995/Refurbishment and conversion 2009 track width: 5,000 mm track length: 34 000 mm cutting range: width 4 000 mm Laenge 18,000 mm runway height 700 mm table height 700 mm Head: 2 head 1: Cutting head head 2: marking unit water basin: 3 sinks sinkable to cut underwater. Power sources: 2 connected in parallel 400 A cutting is possible in the VA range up to 100 mm cutting cutter, soft fillers up to max. 50 mm. The plant is in operation. Complete data about the retrofit on request ; ready for immediate use

400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.

160 kW, max. 7.5 bar, 26.88 m3/min.

160 kW, max. 7,5 bar, 26,88 m3/min.

75 kW, max. 8.60 bar, 11.20 m3/min. oil-free, air-cooled.

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

75 kW, max. 8,60 bar, 11,20 m3/min. Oil-free, air cooled.