max muller used for sale

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Manufacturer Krauss Maffei Type KM 250-1200 B Control MC 3 Built in 1990 Closing unit Closing force t 250 Opening path mm 820 Holm size mm 630 x 560 Installation height min/max mm 330 Plate size 900 x 830 Spraying unit Screw diameter mm 60 Spray volume cm3 678 Spray weight gr 610 Spray pressure bar 1778 Dimensions and weights Dimensions LxWxH m 8.28 x 2.24 x 2.35 Machine weight Kg 12600 Other

max. 14,5 bar, 43,50 m3/min, Refrigerant R 404a.

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

Manufacturer Krauss Maffei Type KM 200 - 620 B Control MC 3 Built in 1989 Closing unit Closing force t 200 Opening path mm 750 Holm size mm 560 x 500 Installation height min/max mm 300 Plate size 830 x 770 Spraying unit Screw diameter mm 50 Spray volume cm3 377 Spray weight gr 339 Spray pressure bar 1638 Dimensions and weights Dimensions LxWxH m 7.10 x 1.70 x 2.30 Machine weight Kg 9500 Other 2 x Core pulls 3 x Air valves robot interface

Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW  ...

A shelving system that can be used for shop fittings, as well as for storage by Tegometall, is offered. the frames of these shelves are deep approx. 2.80 m wide ca 2.18 m high 1.25 m In conjunction with Tegometallwand -, or gondola shelves, they are excellent for loading equipment. As they complete with chipboard, above it still reserves can be stored. The inner shelves can be equipped optionally with smooth or perforated walls, floors, bins, hooks, etc. so that they can be used for merchandise of any kind. Without this inner life they are storage racks, E.g. for the storage of larger materials and pallets. A double box with interior shelves is included in the offer, i.e. 3 red double frame (2.18 m high; 1.25 m deep, together approx. 5.60 m wide) with the necessary trusses and bridges of depth for each field a white double support backs, optional perforated, smooth or mixed for 4 fields  ...

132,0 kW, max. 8,50 bar, 23,81 m3/min.

200.0 kW, max. 9.0 bar, 32.60 m3/min. motor: 400V/50Hz, 460V/60Hz.

200,0 kW, max. 9,0 bar, 32,60 m3/min. Motor: 400V/50Hz, 460V/60Hz.

1972, COIL WEIGHT: 32 TON, THICKNESS: 0.8 - 8.0 MM, WIDTH: 1500 MM MAX., MAX. LENGTH OF THE PLATE: 12 000 MM

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

Used automatic tray packing machine, model B 700 PAR Multifile Mag Manufacturer: MONTPACK Country: Italy New: 1992 Machine capacity: 6-7 packages/min The maximum packet size: 720 x 400 x 380 mm Supply voltage: 380 V Power: 18 kW Power consumption: 10-12 kW / h The maximum diameter of the film roll: 300 mm The maximum length of the film roll: 720 mm Compressed air supply pressure: 6 bar Machine weight: 800 kg Dimensions: 6.1 x 2.5 x 2.2 m (L. X width. X height.)   The machine forms 2x3 packages with PET bottles 1l trays without flanges shrink-wrapped in foil. Shrink tunnel is equipped with a 15-heaters, dual chamber with two ventilation systems; operates at 220 ° C.

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

110.0 kW, max. 8.5 bar, 18.72 m3/min.

110,0 kW, max. 8,5 bar, 18,72 m3/min.

75 kW, max. 10,0 bar, 10,35 m3/min.

250 kW, max. 10.0 bar, 35.88 m3/min.

250 kW, max. 10,0 bar, 35,88 m3/min.

If you are interested we will send you photos! MACHINE DESCRIPTION: The MAS tray packer is a packaging machine that folds and glues an open tray (from a cutting) around the product formation. FORMATION: The machine sets 2 x 5 = 10 Tetra packs per tray. Machine dimensions: 3500-4500mm long depending on infeed conveyor. 2008mm width; Height 2000mm Performance: max 10 trays/min Electrical connection: 5% 50 Hz, 3-phase, 230/400 volts, approx. 8kW Energy consumption: 6 kWh Frequency 50 Hz 2% active power 1.18 kW Volume < 80 dB Electrical equipment: brand products, in accordance with standard MAS machine no. 6017, built 06/2006 Cabinet: Make Rittal V2A firmly installed on machine Pneum. Equipment: Make Festo Glue device: Nordson (3.6 kg tank capacity) with 2 hose system; Glue order volume with proportinal valve Compressed air: 6 bar (dry, oil-free) Air consumption: approx ...

200.0 kW, max. 10.00 bar, 30.00 m3/min. oil-free, water-cooled, excellent condition.

max. 16.0 bar, 46.67 m3 rpm. Caeltemittel R 404a

160.0 kW, max. 7.50 bar, 27.40 m3 rpm, oil-free, air-cooled

160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.

High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus

Meijn MC2 selfemptying separator for eggs or eggshells. Cap max 30000 egg/hr. machine is in good condition.

75.0 kW, max. 10.0 bar, 14.02 m3/min. With frequency inverter. Volume flow 14.02 m3/min at 7 bar.

75,0 kW, max. 10,0 bar, 14,02 m3/min. With frequency inverter. Volume flow 14,02 m3/min at 7 bar.

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

90.0 kW, max. 10.0 bar, 14.03 m3/min.

110 kW, max. 12.0 bar, 16.10 m3/min. volume flow 16.1 m3/min at 10 bar.

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.

110 kW, max. 12,0 bar, 16,10 m3/min. Volume flow 16,1 m3/min at 10 bar.

75.0 kW, max. 13.0 bar, 13.80 m3/min. With built-in frequency inverter. Volume flow 2.0 - 13.8 m3 rpm.

75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.

75.0 kW, max. 8.50 bar, 12.28 m3/min. With built-in frequency inverter. Volume flow 2.89 - 12.28 m3 rpm.

Accessories available. Main data: Distance between top 400 mm Centre height 100 mm Table: Längsverfahrweg of Max 420 mm Kontinulerliche process speed up to 5 m / min Reverse stop at 4 sec Angle 9 ° Grinding spindle stock: Wheels Ø 300 mm Grinding width at Ø 300 up to 50 mm Grinding width at Ø 450 up to 80 mm Grinding wheel hole with Ø 300 127 mm Grinding wheel hole with Ø 450 203 mm Continuous feed up to 0.8 mm / Ø Work piece headstock: Taper Mount MK 4 Orientation 360° Continuous speed regulation 65 500 U/min Tailstock: Inner taper of Quill MK 3 Adjusting spindle stroke 20 mm Dimensions: 2020 mm Width: 1200 mm Height 1350 mm Net weight 1100 kg

75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.

technical data: - with continuous chain bed and hydraulically clocked pressure rollers - with digitally positioned separator for simultaneous separation of boards and sprices - Slides for the Spreissel are included in the scope of delivery - max. wooden length 2.1 m

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds:  ...

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

45.0 kW, max. 10.0 bar, 6.10 m3/min. With frequency inverter. Volume flow 1.5 - 6.1 m3 rpm. New level in 2008 at 51000 operating hours.

45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.

45.0 kW, max. 7.50 bar, 6.06 m3/min. oil-free, air-cooled.

Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt

45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.

75.0 kW, max. 7.50 bar, 13.80 m3/min. condition as new.