137,503 used machines on RESALE, but how to find them? Machine Search
On 2 pallets Auction-ID: A1-51062-404
Auction-ID: A3-46114-12571
Auction-ID: A3-46114-12570
In and including content, consisting of various lengths of flat strip. Auction-ID: A1-50997-153
F20 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa
F24 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa
Safety cabinet, hazardous materials cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet, electronics cabinet, battery cabinet, hazardous materials cabinet, safety cabinet -Manufacturer: asecos, hazardous materials cabinet, safety cabinet -Design: With 3 shelves, drip tray, transport base -Technical data: see photos -Dimensions: WDH 1200/640/H1970 mm -Transport weight: 276 kg
Sell MUBEA profile shears with hole punch, Profile shears for angle, square, round, and flat steel with notching device.By hand and Foot trigger. Machine is in very good condition Condition. Cutting force 350kN. Cutting force for Sheet metal 150x13mm, hole punch 28mm in 10pcs Sheet metal, angle steel up to 90x8, round steel up to 30mm, square steel up to 24mm (steel up to 400N /mm). For this purpose, various Hole and slotted hole stamp.
: gebraucht : 2012 : 9403 : prompt, Zwischenverkauf v : China : 180 € : 1 : 1/4, 3/8, 1/2 mm : 4 kg operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 € : 114.49 € : 3/4 26,9 mm, 1 33,7 mm, mm : 5 mm : 3 mm : 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints. The data for this ad wa ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 € : 20 - 76,1 mm : 3 mm : 2.5 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 € : 3/4 26,9 mm, 1 33,7 mm, mm : 3 mm : 2.5 mm : 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",). The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 € : 1 1/4 42,4, 1 1/2 48,3 mm : 3 mm : 2.5 mm : 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 979 € : 1 1/2 48,3 mm, 2 60,3 m mm : 3 mm : 2.5 mm : 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DAXNER Pneumatic conveying system for coffee / bulk materials – complete – year of construction 2012 For sale is a high-quality and fully equipped pneumatic conveying system from the manufacturer DAXNER, specially designed for the gentle conveying of coffee and similar bulk materials. Technical data: Manufacturer: DAXNER (Austria) Year of construction: 2012 Flow rate: approx. 900 kg/h Conveying type: pneumatic (side channel blower) Product: coffee / light bulk materials Operation: continuous Scope of delivery: Side channel blower Receiver container / separator Valves and control system Complete, functional system Special features: Very gentle conveying (ideal for sensitive products such as coffee) Low-dust / closed conveying Robust industrial design Immediately ready for use Condition: Used, Viewing possible by arrangement. Further information and pictures are ...
Pallet mounting material (872kg total) incl pallet Auction-ID: A1-50936-49
Approx. 70 pieces (total number not counted) Diagonal bracing with scaffolding platform 6x platform 2570mm and 20x 3070mm 630 wide Auction-ID: A1-47450-401
# Hosokawa Solids Industrial Bulk Material Handling System – 2 × 55 m³ Storage Silos Overview Complete industrial bulk material storage, extraction and conveying installation supplied by Hosokawa Solids, designed for receiving, storing, discharging and transporting solid raw materials within an industrial process. The system comprises two vertical storage silos, each with a documented useful capacity of 55 m³, providing a combined reference capacity of 110 m³. The installation incorporates filtration equipment, pressure and vacuum safety devices, explosion venting panels, vibrating extraction systems, mechanical and pneumatic conveying components, dry-air supply equipment, valves, instrumentation, electrical controls and supporting structures. The installation is intended for the handling of bulk solid materials, with actual performance depending on the material's bulk ...
Contents 3 plastic bins with, among other things. Bolts and rondelles Auction-ID: A1-50864-137
Aesculap GB266M – Craniotome Rotary Dura Mater Protector Intended for craniotomies in neurosurgery. Manufacturer: Aesculap Model: GB266M Type: Rotating dura mater protector, micro-Line system (B. Braun Aesculap) Compatibility: GB267R craniotome handpiece, GC303R bur Features: Reusable stainless steel, autoclavable Packaging: Original box Condition: New Auction-ID: A1-51275-156
Content consisting of, among others. cables ; switches; automata; level detectors; cables; wall contacts; hose connections... Auction-ID: A1-50864-130
Contents 16 plastic bins with, among others. bolts and rondelles; straps; lifting eyes; wheels... Auction-ID: A1-50864-138
Unused Engine: 224 cc 4-stroke petrol engine, cutting width: 53 cm, maximum range: Controllable up to 600 meters distance. Fuel tank: 1 litre, consumption: about 0.7 litres per hour. Maximum angle of inclination: up to 45 degrees, maximum speed: 3 km/h. Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters. Design: Robust and suitable for slopes up to 45 degrees. Ease of use: Easy operation and adjustability for optimal mowing results. Safety: incl. emergency stop and obstacle detection for safe use on steep slopes. A powerful 224 cc 4-stroke engine and a cutting width of 53 cm. Auction-ID: A1-40407-25
Diameter 100, various grit Wed: 60, 120, 200, 400, 500, 800, as well as bake up pads Auction-ID: A1-50663-1762
Consisting of: turbo disc, grinding wheel, sculpturing tip, kitchen wheel, galvanic pin Auction-ID: A1-50663-1761
In various sizes, including various supports, on 2 pallets Auction-ID: A1-50889-86
including plastic pallet box; Auction-ID: A1-50707-340
Various plates; cones; barrier posts; on 3 pallets Auction-ID: A1-50892-65
Diameter 100, various grit wo: 120, 150, 200, 800, 1500, as well as back up pads Auction-ID: A1-50663-1769
Diameter 100, various grit Wed: 120, 400, 800, 3000 Auction-ID: A1-50663-1760
Various anchors, The bolts in the floor need to be ground off, rebar and the like Auction-ID: A1-50663-1370
WCP 130 – Professional Branch Chipper • Model: WCP 130 • Machine type: Branch chipper / wood chipper • Max. wood diameter: 130 mm • Capacity: approx. 6–10 m³/h • Three-point mount: CAT I / II • PTO speed: 540 rpm Technical data: • Max. diameter: 130 mm • Height: 1,500 mm • Width: 1,320 mm • Length: 1,510 mm • Weight: approx. 220 kg • Feeding System: Gravity • Box opening: 488 x 590 mm • Filling opening: 130 x 215 mm • Hopper opening: 500 x 618 mm • Number of rotating blades: 4 • Blade thickness: 20 mm • Flywheel diameter: 630 mm • Ejector height: 1,500 mm • Rotary ejector: 360° • PTO height: 460–560 mm Equipment: • PTO shaft included • PTO drive • Height-adjustable base • Dismountable feed hopper • 360° rotatable ejector • Easy blade change due to generous funnel opening Application: ...
Contents of compartments rack consisting of various caulking guns, 2 component sealant, bolts and other fasteners Auction-ID: A1-50663-1669
Packaging material for sampling; various plastic and glass packaging; Contents 8x section of warehouse racking; with 8x rack Auction-ID: A1-50892-37
Load capacity (nominal load capacity): 4,500 kg Working pressure (maximum): 150 bar Load center of gravity: 703 / 810 mm Auction-ID: A1-51285-350
including 3x expansion boiler; various accessories; 2x water softener; Auction-ID: A1-50707-148
Consisting of paint, liquid sprayers, empty buckets, plastering stairs and step-up aids Auction-ID: A1-50663-1673
Contents of rack with various mounting materials, consisting of various sealing bolts, washers, threaded bolts Auction-ID: A1-50663-1668
Consisting of PVC pipe, plastic water pipe, water hoses, auger extensions, stacking boxes, etcetera, on the instructions of Troostwijk Auction-ID: A1-50889-149
Consisting of: taper lap, RT adapter M10, ø20 drill Auction-ID: A1-50663-1763
including plastic pallet box; Auction-ID: A1-50707-341
The complete contents of a shipping container, consisting of: various drills and abrasives, tools, tape, clamps, metal rack, liquid pump sprayer, empty cases from Hilti and Bosch Auction-ID: A1-50663-1320
Various grit, Wed:D76, D126, D427, D601 Auction-ID: A1-50663-1765
Consisting of flush-mounted and central boxes, tube connectors, wire Auction-ID: A1-50663-1662
Full contents of a container consisting of raw materials, sieve tower, brush blocks, test pieces Container itself not included Auction-ID: A1-50663-1602
Rear side mulcher – 2.20 m – for 80–120 hp • Machine type: Rear side mulcher • Working width: 2,200 mm • Suitable for tractors from 80-120 hp • Three-point mount: CAT II or III • PTO speed: 540 rpm • Tilt angle: -50° to +90° Application: • For mulching grass and dense vegetation • Suitable for bushes up to Ø 5–6 cm • Ideal for embankments, ditches and verges • Suitable for agriculture and landscaping Equipment: • Hydraulic side shift • Collision protection • CMR gearbox with freewheel • Belt drive with 4 belts • Electronically dynamically balanced rotor • Offset flails • Two rows of counter knives in the hood • Adjustable rear roller • Guide plate in the hood • Self-cleaning and crushing function • Waterproof and dustproof roller bearing • External rotor bearing seat for easy bearing replacement Techn ...
maximum number of results exceeded
please refine your search
10 € 
