137,132 used machines on RESALE, but how to find them? Machine Search
6 bags per box Auction-ID: A1-50707-388
Straightening and welding plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1380 mmThickness 74 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight approx. 2380 kg; used
including plastic pallet box; Auction-ID: A1-50707-344
Incl. pallet with frame Auction-ID: A7-51326-6
Straightening and welded plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1580 mmThickness 94 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight 3400 kg; used
including plastic pallet box; Auction-ID: A1-50707-336
4 bags per box Auction-ID: A1-50707-375
4 bags per box Auction-ID: A1-50707-374
including plastic pallet box; Auction-ID: A1-50707-343
4 bags per box Auction-ID: A1-50707-389
Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm
Miscellaneous tripods and machines drilling compresor supports Auction-ID: A3-46110-5242
including: valves, couplings and other fittings Auction-ID: A1-50763-61
Required air-pressure: 6 bar 0: 6 m coolant capacity: 7 m3/h Air Operated Diaphragm Pump Type(s) DL25 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Required air-pressure: 7 bar weight: 3 kg dimensions of the machine ca.: 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2 BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Tempera ...
Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: Genie, Superlift Contractor SLC-18 -Load capacity: max. 295 kg -Lifting height: max 5.1 m -Techn. Data: see photos -Equipment: with winch, with standard fork -Dimensions: 1880/800/H2170 mm -Own weight: 151 kg
Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M 090-31 -Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg
Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg
Tool trolley, workshop trolley, transport trolley, table trolley, sliding trolley, material trolley -Material trolley: 2 pieces with swivel casters, used for EHT guillotine shear -Car1: 1100/1010/H530 mm weight 67 kg -Car 2: 1400/1050/H390 mm Weight 107 kg -Swivel casters: 4 each -Submission/Price: complete -Transport dimensions: 1400/1105/H700 mm -Weight: 174 kg
Linde H30D Diesel Forklift Manufacturer: Linde Material Handling Model: H30D Equipment type: Diesel Counterbalance Forklift Year: 2006 Serial number: H2X393T06578 Additional mast marking: H2X188T06582 / MD35T01-046-57393 Fuel: Diesel Quantity: 1 unit Heavy-duty diesel counterbalance forklift designed for lifting, transporting and stacking palletized loads. Equipped with an enclosed operator cab, hydraulic duplex mast, sideshift and long pallet forks. Technical specifications: Rated lifting capacity: 3,000 kg Rated drive power: 43 kW Unladen weight: 4,770 kg Mast: Duplex Attachment: Sideshift Forks: Long pallet forks Tyres: Solid industrial tyres Cab: Fully enclosed Operator equipment: Grammer operator seat Hydraulic control joysticks Steering wheel and pedals Enclosed operator cabin Approx. dimensions (L × W × H): 3,800 × 1,300 × 2,300 mm W ...
maximum number of results exceeded
please refine your search
10 € 
