master used for sale

210 pieces Ringer Master Uni-Clamps, galvanized, List number of manufacturers: 704V71 Compatible with Doka Framax SO000577 Auction-ID: A1-46973-412

Colchester Master 2500 lathe incl. clamp chuck Auction-ID: A7-47048-55

250 pieces Ringer RS tension clamps, galvanized Manufacturer part number: 704V5 Compatible with Doka Framax SO000572 Auction-ID: A1-46973-407

25 pieces of railing posts for the Ringer Master scaffolding bracket 120, ungalvanized, raw, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000586 Auction-ID: A1-46973-417

Doka Framax / Ringer Master accessories for panel formwork, consisting of: 200 x Framax quick release RU, galvanized Ringer Master compatible Doka Framax Item number 588153400 SO000574 Auction-ID: A1-46973-409

20 pieces Ringer Master crane hooks, galvanized, untested Factory number: 708V4 Compatible with Doka Framax SO000573 Auction-ID: A1-46973-408

Doka Framax / Ringer Master accessories for panel formwork, consisting of: 87 x Framax quick release RU, galvanized Ringer Master compatible Doka Framax Item number 588153400 SO000575 Auction-ID: A1-46973-410

• Porsche-Diesel Master 419 \"long version\" vintage tractor • Rare long version – significantly rarer than standard model • Year of manufacture / first registration: 01.07.1962 • Original Porsche diesel farm tractor • 37 kW / approx. 50 hp diesel engine • 3,500 cc displacement • Chassis number: 419456 • Approved as LOF. Farm tractors • German vehicle documents available • DEKRA documents available • Highly sought-after collector's and enthusiast's version • Long version with longer wheelbase and striking look • Only comparatively small numbers of the long-wheelbase version were built • Particularly interesting for collectors, Porsche diesel enthusiasts and classic car exhibitions • Restored and very well maintained overall condition • Eye-catching red paintwork with very good presentation effect • Nameplate available and legible • V ...

Auction-ID: A7-47149-6

Renault Master 2.3 Diesel EURO 6 6-speed, manual 218,000 original kilometres Towbar Light Cargo Electric Windows Electrically adjustable exterior mirrors Hands-free Radio Central locking Auction-ID: A3-44486-5018

This Renault Master horse truck from 2010 is offered in driving and complete condition, equipped with a professional horse body. The vehicle is registered as a light truck (N1) and has full Belgian documents, including a valid technical inspection until October 2026. The car is equipped with the reliable 2.5 dCi diesel engine (88 kW / approx. 120 hp), coupled to a manual gearbox. This engine block is known for its durability and is very suitable for transport applications such as horse transport - External dimensions (approx.): Total length: ± 6.10 m - Total width: ± 2.10 m - Total height: ± 2.80 m ➡️ Construction in polyester/aluminum (mentioned on identification report) - Valid Belgian technical inspection until 07/10/2026 - last inspection carried out at 196.418 km - complete Belgian documents available - suitable for 1 to 2 horses Auction-ID: A3-44486-10755

Processing Capacity: Minimum bar diameter: 8 mm Maximum bar diameter: 80 mm Magazine capacity (MP version): 300 mm (inclined warehouse) Magazine capacity (P version): 700 mm (chain elevator magazine) Magazine capacity (F version): 2,000 kg bundle (belt magazine) Bar feed speed: Adjustable up to 500 mm/s Return speed: Up to 1,000 mm/s Maximum Thrust Force: Electronically adjustable (for thin or heavy bars) Thrust system: Brushless motor with digital drive Total length: Approx. 4,100 mm (for 3.3 meter bars) Width: Approx. 900 mm (varies depending on the type of warehouse) Bar axle height: Adjustable from 900 mm to 1,250 mm Total weight (empty): Approx. 1,100 kg – 1,300 kg Auction-ID: A7-47195-33

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining Range: X 2500 mm, Y 1360 mm, Z 100 mm (120 mm pass-through) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 inch rotating magazine. ISO30, manual tilting X/Y index head Table: belt-driven, vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: EC Auction-ID: A1-46801-40

Built-in hood On the base Sold without content Forming 60x40cm Auction-ID: A1-47151-101

Machine: MASTERWOOD TEKNOMAT 2800 Cutting Machine Year: 2004 Machining Capacity: X 2800 mm, Y 780 mm, Z 770 mm Positions: - Electrospindle milling unit HF 3.3 kW, 18,000 rpm, tilt -7° to +90° (x2) - HF 5.5 kW electrospindle milling unit, 18,000 rpm, horizontal fixed - HF 5.5 kW electrospindle milling unit, 24,000 rpm, vertical, ISO30 taper Equipment: panel support, 3 pneumatic front pressers + 2 stops, separate electrical cabinet Software: Masterwood MW313 with ANUBA programs (hinges, hinges, locks, strikers, special cutters) Axle speeds: U 60 m/min, V 20 m/min, W 20 m/min Safety: infrared barrier, CE protection Suction: Ø200 mm, flow rate 3000 m³/h Consumption: 32 A Dimensions: 5430 x 4798 mm Weight: 3600 kg + 430 kg (electric cabinet) Auction-ID: A1-46801-41

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining Range: X 2500 mm, Y 1360 mm, Z 100 mm (120 mm pass-through) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 inch rotating magazine. ISO30, manual tilting X/Y index head Table: belt with vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: EC Auction-ID: A1-46801-39

CNC mortising milling machine MASTERWOOD OMB1 CN3KF • Year : 2005 • Working dimensions: 5600 × 300 mm • Numerical control: SINCRO on Windows PC • Router head: 4 kW • Vertical bar presser for top routing • Digitally controlled retractable backgauges • Table with motorized belt and side stops• Motorized vertical loader and side unloader• Automatic horizontal press (20–220 mm) • Vertical press (18–160 mm) – working up to 33 mm from the milling pin • Power supply : 400 V / 13.4 A / 50 Hz • Weight : 2000 kg  Auction-ID: A1-46801-3

Machine: MASTERWOOD door production line DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: L max. 2500 mm, max. W 1300 mm, h max. 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: EC Auction-ID: A1-46801-37

Brand: Cold master Type: Vista Stainless steel: Yes Electric connection: 230 V Total dimension L: 70 mm Total dimension W: 65 mm Total dimension H: 51 mm Material: Rvs There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-12

BROKEN GLASS. UNTESTED . There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-20