master used for sale

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

This 4-axis GORATU G Master 31 was manufactured in 2006. It features a large table of 3000 x 900 mm, capable of handling a maximum weight of 6000 Kg. The machine offers extensive travel with 3000 mm on the X-axis, 900 mm on the Y-axis, and 1500 mm on the Z-axis. It includes a 24-slot tool changer and a powerful main motor of 22/27 kW. Contact us for more information about this machine.

Manufacturer: Rubble Master, • Model: RM80, • Year of manufacture: 2008, • Operating hours: approx. 6,000 h, • Engine: Deutz diesel engine – 163 HP, • Maksimale Produktionskapazität: bis zu 150 t/h, • Maximaler Vorschubgröße: 700 mm, • Impact Crusher: 4-hammer system, • Conveyor belt: 300 × 80 cm, • Machine length: 820 cm, • Machine height: 296 cm, • Machine width: 246 cm, • Machine weight: approx. 23,000 kg, Manufacturer: Rubble Master, • Model: RM80, • Year of manufacture: 2008, • Operating hours: approx. 6,000 h, • Maximum production capacity: up to 150 t/h, • Maximum feed size: 700 mm, • Impact crusher: 4-hammer system, • Conveyor belt: 300 × 80 cm, • Machine length: 820 cm, • Machine height: 296 cm, • Machine width: 246 cm, • Machine weight: approx. 23,000 kg

This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.

Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.

This 3-axis MASTERWOOD Project 315 was manufactured in 2007. A robust CNC router with a working size of approximately 120 x 280 cm, it features a 12-slot changer and a powerful vacuum pump rated at 90 m3. The computer was updated in 2023, and the axis control was renewed in 2018. If you are looking to get high-quality milling capabilities, consider the MASTERWOOD Project 315 machine we have for sale. Contact us for more information.

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

Used Used Labeller P.E. Master M 6T Adhesive: Year: 2004 Condition: Good Used Labeller P.E. Master M 6T Adhesive: Model: MASTER M 6T 540 2S 2E Year: 2004 Speed: 3.000 bph Direction: Counterclockwise 6 heads 2 adhesive stations 2 labels, front and back Safety Protections Layout macchina Code: EA 659 More details: https://bottlingscout.com

CARTOBOL ECOFILL MASTER "Bag in Box" automatic line for industrial liquid packaging (2021). Low usage. Designed for standard VITOP® DN15 Bag in Box fitments. Suitable for volumes from 3 to 20 litres. Complete line comprising ECOPACK MASTERFORM automatic case former for B1–B1 cartons with central sealing, minimum/maximum carton dimensions 100 × 220 / 115 × 225 mm and minimum/maximum carton height 210 / 400 mm; ECOFILL MASTER automatic filling machine with production capacities of approximately 780 bags/hour at 2.25 litres, 600 bags/hour at 5 litres and 290 bags/hour at 20 litres; 100-litre pressurised buffer tank; ECOPACK HOTMELT hot-melt case sealer; and automatic cartesian palletiser for 3 to 10 litre Bag in Box cartons, configured for continuous, accurate and reliable production.

Used Used Labeller P.E. Master M/S 5.400 bph: Year: 2014 Condition: Good Used Labeller P.E. Master M/S: Model: Master M/S Year: 2014 Speed: 5.400 BPH Direction: Clockwise Electric head adjustment 6 heads Mechanical cam plate 3 Adhesive Stations Applicable label: ? Front ? Back ? Collar Safety protections Tunnel drying Tardito ? 2014 Speed: 3.000 bph Air blade system Code: EA 668 More details: https://bottlingscout.com

A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.

Used Used labeller P.E. Master m/e: Year: 2010 Condition: Good Used labeller P.E. Year: 2010 Speed: 3.000 bph Direction: Counterclockwise Model: Master M/E Optical centering Electronic cams 4 heads Nr. 3 adhesive stations Type of labels: Front label Back label Neck label Safety protections Code: EA 602 More details: https://bottlingscout.com

diameter range 6 mm shaft length under head 25 mm output pieces/min 100

Code: 0305 Brand: MUTI MASTERWOOD Model: OM B1 Hydraulic single-head chisel mortising machine for making precise mortises for wooden windows Technical data: Sturdy cast iron structure Hydraulic movements Hydraulic clamping presses Air jet stroke cleaning and tool cooling system Head motor 3 Hp Control unit pump motor 1 Hp Max head stroke 150 mm Max groove depth 130 mm Vertical head adjustment 100 mm Longitudinal table stroke 400 mm Table dimensions 1000 x 310 mm Work surface height 860 mm Weight kg 700

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of construction: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O²,N²) 1 x TEKA filter system outdoor installation 1 x nesting program on the machine control Availability: immediately

Refrigerated counter Coldline Master GN 2 for fast and flexible application Model No.: TS13/1M-760 Stainless steel version Cooling range - 2 to + 8°C adjustable Convection cooling Device is plug-in, 2 doors Connection 230V Dimensions: 1300 x 680 x 860 mm, WxDxH Used device

Tires, solid rubber tires, forklift tires, complete wheels -Handover: in its current condition as inspected -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic, 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Sale: complete -Dimensions each: Ø 570 x 160 mm -Weight: 96 kg

Refrigerated display case Dilara 180 Convection refrigerated display case 4 stainless steel shelves verst. Sliding doors made of insulating glazing Temperature adjustable from +3 to +15°C Coolant R 290 only DGUV V3 tested by us Measurements; 1800 x 750 x 2000 mm, WxDxH Connection: 230V, 1166 Watt Demonstration device & SAB tested

Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

Masterfill Filling Machine S 500, The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products., Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards., The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill ...

max. workpiece length: 4400 mm profile spindle: 1 Stück main drive: 19,2 kW Control: Beckhoff CNC machining center MASTERWOOD 4 WIN --------------------------------------------------------- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Different tool magazines for optimal tool loading - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of the workpieces - CNC controlled work table with automatic positioning of beams and Stretcher - Automatic re-clamping for changing between external and internal profiling - INTEGRATED window construction software, i.e. the machine does not have to (but can of course) can be controlled from the office with external industry software. - strong motor with 19.2 kW HSK-63 E Please note that this stock machine is with us in Oberkochen and is already equipped with many useful  ...

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Technical data: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Sealing machine Dimensions de la clutch : 650 x 450 x 170 mm Sealing length : 650 mm Speed : 0 - 12 m/min Sealing temperature : 0 - 250 °C

Eppendorf Mastercycler Ep Gradient s Realplex 2 Thermal Cycler Thermal cycler model 5345 + 6300 EPgradient S Weight: 20 kg Voltage: 220V Dimensions 60×30×50 cm Without software

Masterwood K29S Multi-Spindle Drilling Machine Number of spindles 29 Rpm 2800 rpm Distance between first and last drill bit 896 mm Number of pneumatic clamps 4 Distance between the centers of the individual spindles 32 mm Max drilling depth 80 mm Operating pressure 6 – 7 bar Motor power 3kW Technical documentation

0: 0,4 - 3 mm Workingpiece thickness from to: 9 - 60 mm Total length: - mm Feed speed: stufenlos 8 - 12 m/min. total power requirement: 15 kw Dimensions (L/W/H): 4.290 x 840 x 1.690 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Used separator/muscle demusing machine from Meat Master type M18 / P-100-S. Year of manufacture 1999. Manufacturer's documentation. CE

Eppendorf Mastercycler 5332 Personal PCR Thermal Cycler Temperature range: 4°C - 99°C Temperature distribution: 95°C ± 1.0°C Temperature accuracy: ± 0.2°C Sample capacity: 25 x 0.2 mL tubes or 16 x 0.5 mL tubes

Cole-Parmer Masterflex I/P 77410-05 BDC drive standard peristaltic pump, 77600-62 head Pump rotation speed: 65 to 650 RPM With 77600-62 high-performance pumphead with thermoset polyester housing, stainless steel Flow rate: 0.01 to 19 l/min. Tubing Type: I/P 70, I/P 88, I/P 89 Equipment tested

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...

Malvern Mastersizer 3000 + Hydro LV - Advanced particle size and size distribution system - Widest measurement from 0.01 – 3500 µm - Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

STM WS 3015 MasterCut 2D waterjet cutting machine was built in 2013 in Germany by STM STEIN-MOSER GmbH. The machine has been regularly maintained throughout its service life, which means that it is in very good technical condition and ready for further use. The STM WS 3015 MasterCut 2D is an extremely versatile machine for precision machining of a wide range of materials, i.e. metal, plastics and glass. It is distinguished by the use of modern components and a robust design, which remains stable even under the most demanding challenges. The machining process is performed by a numerically-controlled workhead, which moves in three axes X,Y,Z with feeds of 3002 mm, 1502 mm and 180 mm respectively. Only water or water with an abrasive additive is used for cutting, making the process free of harmful fumes and safe for the environment. The use of waterjet cutting technology in production gu ...

This 3-axis MASTERWOOD Ks 21.31 wood boring machine was manufactured in 2019. It features an impressive XYZ working dimension of 3100 x 2150 x 100 mm and a tool magazine with a maximum capacity of 12 tools. The machine is equipped with an automatic loading and unloading system using suction cups and has a 360-degree rotation axis. If you are looking to get high-quality boring capabilities, consider the MASTERWOOD Ks 21.31 machine we have for sale. Contact us for further details.

working width: 800 mm; working height: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Units seperatly adjustable; 1. brush: Metalbrush diameter 220mm; 2. brush: Tynexbrush, grit 80, diameter 220mm; height adjustment: manual; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 5,5 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1500mm; waight: 950kg;

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable; 1. Brush: Scotch Brite Medium / Diameter 220mm, Vario drive; 2. Brush : Scotch Brite Hard / Diameter 220mm, Vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely adjustable); Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Working width: 380 mm; Working height: 150 mm; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 210mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable ; Brush removal height: 25 mm with pneumatic damping; 1. Brush: Metal brush diameter 220mm; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Right - Counterclockwise: for both brushes; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

CNC working center model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. maximum panel thickness mm.120 maximum panel clearance mm.150 installed power 16 kW machine weight 4500 kg

Allen Bradley Guard Master 450L-E4FL1800 - safety barrier Brand: Allen Bradley Guardmaster Product type: Light curtain Series: 450L-E Beam Resolution: 14mm Component Type: Transceiver Protection Type: Type 4 Standards/Approvals: TUV, IEC Protection height: 1.8m Maximum protective width: 9m Maximum supply voltage: 24V Minimum Scanning Distance: 0.5m Maximum Scanning Distance: 9m Height: 1.8m Length: 30mm Width: 30 mm Maximum response time: 20ms Connector Type: Screw

This 3-axis MASTERWOOD OM B1 CN3KF was manufactured in 2010. It features a Bedano head and a horizontal milling motor, ideal for creating slots for shutters or blinds. With a working length of 2600 mm and a very good condition, it includes a PC with integrated software running Windows XP. Consider the opportunity to buy this MASTERWOOD OM B1 CN3KF CNC Wood Machining Centre. Contact us for more information.

Overview  This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data  Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery  Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system  

Can filler CFT type Master Can Tronic RS 40/6 with 40 filling valves and 6 head can seamer isobaric filler year of manufacturing: 2013 capacity: 20 000 cph by 500 ml standard cans, on beer 24 000 cph by 330 ml standard cans, on beer can end: 202 Can diameter - min-max.: 50 - 66 mm Can height - min-max: 75- 190 mm pitch: 141 mm incl. lid feeding system incl. control system: PLC Siemens S 7 filling product: beer filling temperature: 2-4°C as nice range for beer The last major service combined with an upgrade of the machine was done in November of 2024. The machine is still in production until the end of June/ bginning of July 2026.

Registration date: 04.10.2017, VIN: VF1MA000259058854, Drive: Diesel, Power: 96 kW, Displacement: 2299 cc, Emission standard: Euro 6, Mileage: 114,000 km, max. Gross vehicle weight: 3,500 kg, Type: Box body