master 35 used for sale

Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible.

General SKU900WP038 MakeLAUDA TypeIT HW 350-Ex LocationBarneveld Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Information Extra Specifications20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., pressure 10 bar, heat transfer fluid water, manufactured in 2003, Serial number B17 276, CE 0036 certified , EX II 2 G EEx edm [ia] IIC T3. : :For control cabinet see 900WP034Temperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

Key data: 500 mm, 400 mm

Roboform 350 + Erowa Robot Compackt 44-Fold Electrode Changer This die-sinking EDM machine offers precise machining with a wide range of features. Details: Year 2006 Travels: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg Accessories: incl. Erowa zero-point clamping system on table WITHOUT electrode holder

1 Wagner Leopard 3570 airless sprayer with air piston drive. It is for hanging on the wall. About 8m of spray hose are included, and a gun with nozzles, filters, etc. For data see type plate Technical data: Gear ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Volume flow rate per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. flow rate: 4.2 l/min The system was in operation until recently, is well maintained and perfectly cleaned. Pick-up only in 27404 Zeven.

This 3-axis CHARMILLES Roboform 350 die-sinking EDM machine was manufactured in 2006. It features travel paths of 350 x 250 x 300 mm and can accommodate a maximum electrode weight of 25 kg. The machine has a power consumption of 7.5 kVA and weighs 2350 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 350 machine we have for sale. Contact us for further details.

General SKU900WP034 MakeLAUDA TypeIT HW 350-Ex LocationBarneveld Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Information Extra Specifications20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., manufactured in 2003, Serial number B17 275, CE 0036 certified. Control cabinet also for Lauda process heaters 900WP037 and 900WP038Temperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.

Key data: 1100 kN

Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control:UNILOG B8 - Touch Screen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was servi ...

This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine.

Key data: 1100 kN

Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m  ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4-axi ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR853 robot Year of Make: 2015 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR853 Year of Make: 2016 6-axis robot: 5 axes are driven by servo motors (electric) ...

This 6-axis CLOOS QIROX QRC-350-E was manufactured in 2020. It features a maximum reach of 1550 mm and a payload capacity of 6 kN, making it suitable for various robotic welding applications. The system includes a welding positioner and a laser system for enhanced functionality. If you are looking to get high-quality robotic welding capabilities, consider the CLOOS QIROX QRC-350-E automation system we have for sale. Contact us for further details.

General SKULT0101 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 Notified bodyHINKE Tankbau GmbH Capacity350 l. (460 l.) Vessel sizesø 791 x 696 mm Dished topcheck Dished bottomcheck OutletG1 Max. temperature—10 / 95 °C With propellor stirrercheck Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y Motorcheck 0,18 kW 230/400V 2825 rpm (Ex) With variable speed drivecheck Speed mixing shaft75—540 rpm Information TypeFluent Tank Year of construction2021 Mounted on legsplatform With switchcheck With switchgearcheck Total height± 1,7 m ATEX compatiblecheck Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor, level  ...

Manufacturer : REHM Thermal Systems Model: VXS air 3500 (Type 734) Type: Convection Reflow Soldering Oven Quantity available: 2 units Condition: Used Key Specifications - Heating zones: 7 pre-heating zones / 3 peak zones / 4 cooling zones - Fan control: 1x top heating fan regulation - PCB width: 55 to 460 mm (with centre support from 65 mm), optional 508 mm - Chain pins: nickel-plated, 5 mm bolt length standard - Transport system width adjustment: manual (electric touchpad operation) - Heating: top and bottom heating - Display: flat screen and three-colour signal lamp - Control system: industrial PC with Ethernet network interface - Software: Vicon with Windows 10 Enterprise LTSC - Certification: CE compliant - Standby mode: Yes Find more here - / Contact us at -

welding power: 40 - 350 / 12 - 40 A/V open-circuit voltage: max. 56 V voltage: welding current: 100%: 300 A wire speed: 0 - 24 m/min capacity: 15,9 kVA voltage: 3 ~ 400 V frequency: 50 Hz Coolant:: F Protection class: IP 23 weight of the machine ca.: 153 + 22 kg dimensions of the machine ca.: 1,10 x 0,60 x 1,15 m Welding machine CLOOS - GLC 353 MC 3 - incl. Wire drive Unit CLOOS - CK98 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU079B444 MakeAviteq Vibrationstechnik TypeOA-1150/350-UVB No.6300095-001 Mounted on framecheck Specified Features - Vibro feeder Material finishPolished inside Main Features MaterialStainless steel Length1150 mm Width350 mm Vibro feeders MaterialStainless steel Vibro feeder(1x) Feeder width350mm Feeder length1150mm Feeder height275mm Closedcheck Inlet355x355mm With motor0,3 KW, 230/400 Volt (2x) Information LocationBarneveld Floorspace1,8x0,9 M Total height1,0 M Weight380 KGVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A CNC die-sinking EDM machine Charmilles without counter is available. Travel path X/Y/Z: 350mm/250mm/300mm, C-axis: 360°, tool positions: 4, quill stroke: 300mm, table dimensions X/Y: 500mm/400mm, max. workpiece weight: 500kg, max. workpiece dimensions X/Y/Z: 780mm/550mm/370mm, surface quality: approx. Ra 0.1µm, max. electrode weight: 50kg, tank usable volume: 160l, total tank volume: 410l. Machine dimensions X/Y/Z: approx. 1900mm/1700mm/2550mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible.

2 x die-sinking EDM machines Maho Hansen HS 350 E and HS 300E built in 1990

Key data: 800 kN

Arburg 420S 800-350 Year of Make: 2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Dimensions: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...

Key data: 1300 kN

Arburg 470S 1300-350 Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit: Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps ...

Arburg 470S 1300-350 Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pu ...

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...

Year: 2006 - technically efficient, ready to work – after full service - handle function - copying template - pneumatic profile mounting - centering device

F20 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER PRODUCTION YEAR : 2014 ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa

SICAR sliding table machine model SEGA 350, year 2025, CE standards: - 3200mm aluminum carriage - Useful cutting width on parallel guide 1250mm - blade D=350mm, motor KW 5.5 / HP 7.5 - scorer D=120mm, motor KW 0.75 / HP 1 - manual tilting of the blade unit - digital display of the blade group inclination - upper protection with built-in extractor hood Optional Installed: - motorized lifting of the blade unit - Digital reader on the parallel guide - n° 3 digital readers on the bars of the square guide

8 Pieces Diesel Container Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110

Condition: tested, fully functional Availability: immediately Width approx.: 350 mm Length approx.: 1570 mm

PEMA HPS 3500 & TPS 3500 welding positioner was built in 2021 in Finland by Pemamek Oy Ltd. The system consists of two, extremely versatile machines – the HPS 3500 headstock and the TPS 3500 tailstock with a combined payload of 7 tonnes. This solution is dedicated to lifting and rotating long workpieces, making it ideal for the production of, among others, wind towers, trailer frames or tubes. Both machines can work together or independently. The stepless height adjustment ensures precise adjustment of the working parameters to the dimensions of the workpieces. Technical specifications of the PEMA HPS 3500 & TPS 3500 welding positioner - maximum payload: 7 t (headstock 3.5 t + tailstock 3.5 t) - rotation speed: 0.06-1.3 rpm - tilting axle height adjustment range: 700-1500 mm - work table plate diameter: 950 mm - T-slots on work table plate: M20 DIN508 (4 pcs.) - maximum torque ...

Flat conveyor belt on aluminium substructure Length of the strap 355 cm, width of the strap 60 cm With the regulation of the amount Conveyor belt mobile, on wheels

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

Panel saw Type: Concept 350 Manufacturer: Fimal Year: 2019 Main blade 350 mm Pre-cutting unit Massive formatting table Precise parallel ruler Strong and stable operation 400 V / 3 phases 20 pcs of discs included Machine in good condition, under power Find more here - / Contact us at -

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Dimensions (L/W/H): 2300 x 700 x 1300 mm Air consumption: 3500 m³/h Motor output: 1,5 kW weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OMS SALVARANI double miter saw model OK 350 SUPER: - useful opening 3200mm - adjustable blades D=350mm - Total power kw 8.3 , volt 380 - year 1995, machine to CE standards

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

We are selling here a dishwasher from the manufacturer KBS, type 3505 AP in a very good used and functional condition. Runs on 400 volts, 7.9 kW, built in 2019, with base, 2 baskets, rinse aid and detergent feeder, lye pump and booster pump, workshop tested, immediately ready for use, dimensions W/D/H 60/60/83 cm, others on request.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis +GF+ AgieCharmilles FO 350SP die-sinking EDM machine was manufactured in 2013. It features a stable EDM generator, a fully operational 360° C-axis with a rotational speed of 100 rpm, and a substantial work area of 800 × 550 × 370 mm. Well-maintained and operational until its last day, consider the opportunity to buy this +GF+ AgieCharmilles FO 350SP die-sinking EDM machine. Contact us for more information about this machine.

Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - / Contact us at -

saw blade diameter: 350 x Ø 32.0 mm capacity 90 degrees: flat: 175 x 75 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 100 x 80 mm capacity 45 degrees: square: 85 x 85 mm turning speeds: 3000 U/min total power requirement: 1.5 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90 - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the s ...

CONTROLS   CNC controls MOULD CLAMPING UNIT   locking force: 350 to   die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR)   stroke: 150 mm INJECTION UNIT   stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3700 mm   space requirements -front/back-: 1300 mm   total height: 2100 mm   total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB3 units available

Key data: 2000 KW, 2500 kVA, 400 V

Natural-Gas Caterpillar 3520-C 2000kw 2500kva 400 volt 50hz Natural Gas 26.122 original hours scope: Genset, control panel, Gasline, filterbox, Located in our warehouse in: General Power Holland B.V Kranenpool 10 6443VA Brunssum Netherlands info@generalpowerholland.nl Phone: +31681163153

Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...