master 35 used for sale

1992 Masterwood MW21.31KS CNC drilling-milling machine Electric throttle (throttle n° ) Electric throttle - 11 fuggoleges + 6 horizontal - 11 ftie:e:oleges + 6 horizontal + furrow - 24.000 rpm 2.04. Noise level The noise level of the cheetah: MW 12.25 KS/ MW 15.38 KS/ MW 18.38 KS/ MW 21.31 KS/ MW 21.42 KS In accordance with 1SO7690 - EN848.3 Furas: - level of acoustic noise Leą at the operator´s load - the maximum power of the instantaneous acoustic footprint is less than - the acoustic difference under the LWA load is below Ćitvalastas: 19,5 dB (A) 130 dB (C) 99,2 dB (A) - level of acoustic noise Leą at the operator´s load: 82,5 dB (A) - the maximum power of the instantaneous acoustical noise is less than 130 dB (C) - the acoustic difference under LWA load is less than 103,4 dB (A) The tests were carried out with a Bruel & Kjaer 223 I precision integral sound  ...

Rubbel master RM 100 stone crusher, built 2010, overhauled this year, new radiator, regular serviced motor and newly repainted shell. Available immediately. Grid unit OS 100 from 2011. Ca. 7,524 working hours. Test and presentation possible can also organise transport inside EU with our own trailors. More photos on request.

A used electric deck oven Wachtel Piccolo I-4 with 4 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-4 DMS 3 Master EM Timer K - 4 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box for the generation of steam - with automatic night start function - with exhaust hood - Stove with water connection for steam - Height is adjustable - 19.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 10 / 2010

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Schiele, Type: Vaccumat Master, Year: 2002, Control: Siemens S 7, Spraying heads - total: 2, Lackheizung: yes, Unterdrucküberwachungt: yes, Lackrückführungt: yes, Year :2002

Manufacturer: Fischer Rückle, Type: Cut Master, Year: 2007, Control: Fischer Rückel, Cross cutting guillotine: Qeurschneidanlage und Verbindungsmaschine, Cutting lenght mm: 250-2800, Working hight mm: ca.1,5, Digital readout lineal guide: yes, FREE TEXT: verlleimung über Fadensystem, Year :2007

Manufacturer: DMC, Type: Masterbrush S 1350 DBB, Year: 2017, Number of units: 2+1, Working widht mm: 1350, Through running hight max mm: 3-200 mm, Diameter of brushes: 300 mm, Through running hight max mm: 3-200 mm, Feeding speed continous adjustable: 2-16 m/min, Year :2016

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details.

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...

Manufacturer: CIMA Model: CI Master 1800 Year of Manufacture: 2019 Type of Machine: Extruder Builder Extruder Size: 90mm Pin Extruder (suitable for tire sizes from 17.5R25 to 26.5R25) Configuration: Cold feed extruder with barrel Control System: Allen-Bradley PLC equipped Cooling System: 4x zone temperature-controlled cooler (Hot/Cold) Power Supply: 380V Air Requirement: 8 bar input Expandable Rim Options: 25”, 22.5”, and 20.5” sizes Condition: Brand New Useful for building TBR and OTR tire sizes Find more here - / Contact us at -

M. No.: 91080-41861 Age : around 1994 Speed: first 70 Sec. / Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

axis stroke (X,Y,Z): unbegrenzt, 1000, 60 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 6 St. milling motor: 4,5 kW CNC machining center at a Special PRICE! MASTERWOOD TF 100 2.0 Partnership Edition Furnishing: ----------------------------------------------------- - Drilling head with 16 drills for 5-sided machining - Grooving saw unit - Milling unit with 6-fold tool changer - incl. grooving saw blade, 2 diamond cutters, 1 WPL finishing cutter - Preparation for CLAMEX and door package - 2 foldable roller conveyors - program-controlled central lubrication ----------------------------------------------------- SPECIAL PRICE 44,990.00 euros (plus VAT) ex works ----------------------------------------------------- Freight, installation, instruction within Germany including 8-hour training individually and on site SPECIAL PRICE 3,000.00 euros (plus VAT) Partne ...

Équipement de distribution Schneider Merlin GERIN Masterpact circuit breaker. Batch of 17 circuit breakers avalable, possible to sell individually. Disjoncteur : M20N1 Circuit breaker 3 Piece Disjoncteur : M16N1 Circuit breaker 1 Piece Disjoncteur :M25N1 Circuit breaker 1 Piece Disjoncteur :M10N1 Circuit breaker 3 Piece Disjoncteur :NW12N1 Circuit breaker 3 Piece Disjoncteur :M32H1 Circuit breaker 2 Piece Disjoncteur SEL PACT DN 2 Circuit breaker 1 Piece Disjoncteur compact NS1250NA Circuit breaker 2 Piece Disjoncteur CM 1250 Circuit breaker 1 Piece

Was fitted on a Gildemeister Sprint 65

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

turning diameter over bed: 360 mm centre height: 170 mm centre distance: 650 mm turning dia. over face-slide: 196 mm spindle bore: 42 mm inner taper MT: 5 spindle turning speed - stepless: 20-3250 U/min weight of the machine ca.: 1,6 t dimensions of the machine ca.: 200 x 125 x 165 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot runner controller - Mold Masters M2XS-24 Year of Make: 2016 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mold Masters M1-24-24 / Like new Year of Make: 2019 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Manufacturer: P.E. Labellers Model: MASTER M.S. Type: 12T-770/4S-4E Year of Manufacture: 2007 Electrical Specifications: - Voltage: 400 V - Phases: 3 - Current: 11 A - Power: 6 kW - Frequency: 50 Hz Pneumatic Specifications: - Air Consumption: 30 L/min - Air Pressure: 5 bar Weight: 2200 kg CE Certified Y271010885 can manage a bottle height range from 120 to 400 mm - The range of bottle Ø goes from 30 to 120. - For the label length, this machine can apply labels that cover max 180° of the bottle. - The adhesive stations have a size of 200 H. - The machine is predisposed for the mechanical centering via bottom notch. - Max velocity of the machine is 8000 B/H. Find more here - / Contact us at -

Perfect binder Master e Connecting bridge Speed: 1,000 - 6,500 cycles/hour Dedusting station with suction nozzle Output max.: 1,000 - 6,500 cycles/hour Product height: 140 - 435 mm Document width: 75 - 370 mm Speed (inline): 1,000 - 8,000 cycles/hour Gathering machine Sprinter 7010 (16 stations) 16 gathering stations Control: PLC Heavy Duty Back Machining Tool 18 brackets Furniture for small format Pressure station Electronic double-sheet inspection Product width: 105 - 320 mm Min. paper weight: 70 g/m² Fault sheet inspection Main milling machine Folding station Creasing station Cross-stack delivery Product thickness: 2 - 62 mm Manual docking station Max. layer thickness: 3 mm Clamp opening: 12 - 90 mm Hot Melt Back Tying Station PUR back binding Hot Melt Side Binding Station Envelope feeder 2 pressure stations

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - / Contact us at -

Colchester Univ. Lathe Master 2500 Center height 180 mm Center width 600 mm Bore (passage) 40 mm RSF 2-Axis Digital Display Type Z-550 incl. accessories

Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker

Hot runner controller - Mold Masters M1-24-24 Year of Make: 2016 Location: Lodz, Poland Description: 24 hot zones with cabling All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

GRAEF MASTER 3370 Specifications: 400 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake  ...

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake functi ...

turning length: 1000 mm turning diameter: 360 mm swing diameter over bed slide: 220 mm turning dia. in gap: 502 mm spindle bore: 52,0 mm turning speeds: 70 - 2.000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 3 MK quill travel: 100 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1825 x 750 x 1600 mm Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gear ...

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

Universally applicable frame dowel and slotted hole drilling machine with angle adjustment Especially for staircase construction, window construction and universal use through pneumatic height adjustment Angled dowels and picket drilling are easy to implement thanks to the rotatable drilling unit. Motor pole-switchable, two speeds Motor power 1.0 / 1.5 kW, 1400 and 2800 rpm Start of the motor with practical handle switch With two-jaw chuck 1 - 20mm from Röhm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing. The desired drilling heights can be set for each drilling level with a digital counter, the changeover then takes place pneumatically from the front Transverse adjustment 340mm, infinitely variable or in 12mm increments, w ...

punkt-zu-punkt-Bohrmaschine mit numerischer Steuerung MASTERWOOD SPEEDY 207 für die kundenspezifische Möbelherstellung, Küchenmöbel, Badezimmermöbel und verschiedene Prozesse bohrkopf mit 5 unabhängigen vertikalen Spannfuttern und 1 doppeltem horizontalem Spannfutter säge für Längsschnitte maschinentisch mit 1390 x 750 mm Bohrkapazität und zwei seitlichen Hochfahranschlägen, die von der Steuereinheit gesteuert werden, um mit nur einem Programm und einem Zwischenhalt platten bis zu einer Größe von 2800 x 750 mm auszuführen möglichkeit zum Bohren von 2800-mm-Platten pneumatische Werkzeugverschiebung mm 60 max. plattendicke mm 50 drehzahl der spindeln U/min 4500 sägerotation U/min 6000 vakuumpumpenmotor PS 1.5 Saugnapfdurchmesser mm 80 frontanschlag komplett mit 4 Schließzylindern zum Bohren schmaler Werkstücke und Leisten multitasking-steuerung komplett m ...

SPECIFICATIONS: Work table size: 1000 x 310 mm Working depth: 130 mm Longitudinal stroke of the work table: 400 mm Transverse stroke of the work table: 150 mm Installed power: 2.95 kW EQUIPMENT: 02 Workpiece stop guides Accessories

Aufschnittmaschine / Slicer GRAEF MASTER 3020 Specifications: 230 Volt / 50 Hz / 2.2 A / 500 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 300 mm Stainless steel knife incl. grinder Luminous flux Machine with CERA 3 coating Weight: 37 kg External dimensions (L/W/H): 500 x 600 x 420 mm Cutting size: L 260 x H 195 mm Cutting thickness 0 – 24 mm Carriage dimensions: L 260 x W 300 mm Installation area: L 540 x W 440 mm External dimensions: L 600 x W 570 x H 420 mm Working area: L 680 x W 720 x H 570 mm Knife speed: 230 rpm with weighing function up to 0 - 5,000 g (not legal-for-trade) Year of manufacture: 2018 Function checked, machine ready for immediate use! RRP: EUR 5,057.50 Condition, see original pictures! If you have any questions, email or call.

General SKU383U1043 LocationBarneveld MakeNetzsch TypeMastermill 3 No.2404563 Year of construction2015 Main Features MaterialStainless steel Volume10 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 Vertical sandmillcheck Basket Mill Capacity9 Ltr. Housing dimensions Dia. 220x250 mm InletDia. 220 mm With sievecheck With jacketcheck Motor2,2 kW With variable speed drivecheck frequency converter Rotor speed1100-3000 rpm With ballscheck Information With switchgearcheck (as is) Total height1,2 m Weight630 kg CEcheck Floorspace1,2x0,9 m ATEX compatiblecheck Extra SpecificationsDrive power mill, 2,2 kW, drive power stirrer 0,75 kW, mill speed 1100-3000 rpm, mixer speed 180-2600 rpm, basket volume 0,5 ltr, :Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in wo ...

Energy chain, energy guide, 9000 mm, Master L60, Kabelschlepp, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part comes from a spare parts warehouse at a manufacturing plant, has never been used, is new and has only very minor signs of storage. Energy chain, energy guide, Kabelschlepp company, as good as new, Master L60, KR135 /300x90mm open, inside 270x60mm, total length 9000mm, Includes 3 connecting parts, Various separating elements in the cable guide that can be removed.. Material: plastic and aluminium 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Al ...

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used RINGER Master formwork , galvanized, well-maintained, and ready to use †incl. 3.30  m hinged corner! Only while supplies last. 🟠 👉 Don’t miss out: just €4,999 for the complete set! 🔹 Durable steel panels with plastic facing †clean, long-lasting, ready-to-use 🔹 System compatible †perfect for existing RINGER inventories 🔹 Sustainable & cost-efficient †smart building with second-hand gear ♻ Pre-owned formwork is trending †and just as powerful on-site. Think sustainable, build economically †with used wall formwork that delivers. 📦 It’s that easy: add your package to the inquiry cart †receive your custom quote in no time. 💸 Once paid, we deliver straight to your site or prepare for pick-up. 💡 Buying used formwork? Now it’s easy  ...

Compact, lightweight, and immediately available †this set of used Alu Master formwork panels is the ideal addition to your existing system . 🚧 With approx. 30   m ² , it offers maximum flexibility for smaller jobs or targeted system expansions †cost-efficient, crane-independent, and ready to use . 👉   Only €2,275  for the complete set! What makes the Alu Master so smart:   Aluminum hollow-chamber profile †lightweight & easy to handle, perfect for crane-free formworking Compatible with Stahl Master formwork †seamlessly integrates into your existing setup Powder-coated & easy to clean †for clean results with minimal effort   Perfect for small teams & quick projects †efficient, flexible, well-designed ✨ Secure it now †used ...

Article No.: 91256 // S. No.: 91228 Work Surface: 48,3 cm W x 34,3 cm H

Slicer Graef Master 3020, with scale, Connection 400V, knife diameter 300mm, Dimensions LxWxH approx. 60x57x42cm, weight approx. 38kg Year of manufacture 2018, with signs of use, technically perfect condition

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

FKS Fold Master creasing machine; SN 1019 05, Stacker feeder, counter, delivery, 4 creasing tools, computer control

This 3-axis Omaksan Mastercraft 2137 was manufactured in 2021. It features a robust aluminum processing table, a 9 kW IOX spindle, and a 12-fold linear traveling tool changer. The machine includes a Beckhoff control system and drive motors, enhancing its precision and efficiency in wood machining. If you are looking to get high-quality milling capabilities, consider the Omaksan Mastercraft 217 machine we have for sale. Contact us for more information about this machine.

This CNC Wood Machining Centre was manufactured in 2020. The Masterwood MASTERDRILL TF 600 SA features dual 3.5 kW milling spindles with a maximum speed of 18,000 rpm and air cooling. It handles workpieces from 400 to 2500 mm in length and 400 to 950 mm in width, with thicknesses from 8 to 60 mm. If you are looking to get high-quality milling capabilities, consider the Masterwood MASTERDRILL TF 600 SA machine we have for sale. Contact us for more information.