master 35 used for sale

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 723.3 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1750 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c32-ljw-353864 5-used/759, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LJW-3538645; Transport weight [kg]: 3500

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 428.8 Kw, Nominal Rpm @ Nominal Power: 2100 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 7283.3 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 429 Kw, Rated Speed: 2300 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c18-wrh-359181 2-used/432, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: WRH-3591812; Transport weight [kg]: 1675

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 428.8 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 2100 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 7231.7 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 429 Kw, Rated Speed: 2300 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c18-wjh-359181 2-used/228, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: WJH-3591812; Transport weight [kg]: 1630

Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/136, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/202, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/268, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 639.8 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1750 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508b-2gr-1044 777-used/560, , = More information =, , Type: Engine, Type number: 2GR-1044777; Transport weight [kg]: 5000

Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE

Key data: 1472 KW, 1840 kVA, 450 V

Two (2) Surplus Caterpillar Marine Generator 3512B, 1472 kW Cont. 450v. 60 Hz. Two (2) Surplus/Never Used/Never Installed Caterpillar 3512B, 1472kW Continuous, 450v. 60 Hz. Marine Diesel Generators Two (2) Surplus, Never Used, Never Installed, Caterpillar 3512B, 1472 kW Continuous, 450v, 60 Hz. 0.8 P.F. 1800 RPM, Leroy Somer Generator, Control Panel, Diesel Generator set, Year 2016. APPLICATION: Marine Generator Set.

Key data: 1566 KW, 1600 1/min

Surplus Caterpillar 3516C, 2100 BHP, 1600 RPM, Marine Propulsion Diesel Engine Surplus/Never Used/Never Installed Caterpillar 3516C Marine Propulsion Diesel Engine One (1) Surplus, Never Used, Never Installed, Caterpillar 3516C, 2100 BHP, 1600 RPM, Marine Tier II, Diesel Engine, Keel Cooled, Duplex Fuel Filter, 24v. Starter, Electric Starter Harness Assembly, 24v. Charging Alternator, Air Cleaner and Instrument Panel. APPLICATION: Marine Propulsion.

Key data: 1600 KW, 2000 kVA, 400 V

Excellent opportunity to acquire a fully operational Natural Gas Power Plant, reference GAS72225, featuring a single Caterpillar genset model 3516C with a power output of 1600 kW. This complete power plant is available for just €152 700, loaded onto your transport.

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 40413 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 280 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 350 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 487 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-2306c-e14-tag2-generat or-350-kva-used/689, , = More information =, , Empty weight: 2.495 kg, Type number: 2306C-E14 TAG2 GENERATOR 350 KVA

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 85 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 350 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 610 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/cummins-353k2k202c-generator-4 00-kva-used/230, , = More information =, , Year of construction: 1010, Empty weight: 6.500 kg, Type number: 353K2K202C GENERATOR 400 KVA

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 342 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1330 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 850 , Generator Hz: 60 , Generator Volts: 600 , Generator Amps: 117 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3512-24z-8n-5806-g enerator-850-kva-used/304, , = More information =, , Empty weight: 10.800 kg, Type number: 3512 24Z 8N-5806 Generator 850 K

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

Height=2.3 m, Overall length= 2.06 m, Overall width= 1.2 m, Net weight= 818 kg,

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

Dimensions (L/W/H): 860x1060x1060 mm Weight: 280 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two identical Brabender belt weighers are available. Belt width: 350mm, max. throughput: 1800kg/h, inlet diameter: 200mm, outlet diameter: 250mm, load cell nominal load: 5kg, accuracy: +/-1%, max. belt speed: 27m/min, max. bulk good density: 1.5kg/dm³. Machine dimensions X/Y/Z: approx. 1500mm/700mm/700mm, weight: approx. 180kg. Documentation available. On-site viewing possible.

Dimensions (L/W/H): 2100x1900x1980 mm Weight: 3500 kg Total power requirement: 39,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 kN, 25 mm

warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Offer 25435 Specifications: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Left + right screwed rectangular tube 200 mm each - Thickness of the top plate approx. 80 mm - 6 T-slots in table surface length 3500 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 35 / 60 mm - T - groove depth approx. 60 mm - Space required: L 3500 x D 2100 x H 350 mm - Weight approx. 4200 kg

Dimensions (L/W/H): 3500x1500x1650 mm Weight: 2500 kg Total power requirement: 45,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x1400x2000 mm Weight: 137 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5470x1100x2500 mm Weight: 1100 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1650x1600 mm Weight: 1300 kg Total power requirement: 17,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3980x1500x2000 mm Weight: 6000 kg Total power requirement: 22,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x750x1150 mm Weight: 50 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Dimensions (L/W/H): 1400x750x2100 mm Weight: 220 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IN SUPERSILENCED 40 CTR, Power (KVA): 1700, Working hours: 230

Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

IN SUPERSILENCED 40 CTR, Power (KVA): 1700, Working hours: 230

SEGATRICE AUTOMATICA a Doppia Colonna SHARK 350 NC HS 5.0 + Evacuatore Motorizzato a Paletta Segatrice a nastro automatica, a doppio montante, per eseguire tagli a 0° su acciai da costruzione, inox e legati, pieni e profilati, con dimensioni comprese in 350x350 mm. Di serie completa di: Evacuatore di trucioli motorizzato dragante, applicabile a destra o a sinistra della macchina. Regolazione della pressione delle morse. Alimentatore con rulli verticali per il contenimento delle barre. Macchina a controllo numerico CNC MEP 50-Windows CE” Based, progettato da MEP per l’automazione delle macchine di propria produzione. Ciclo di taglio taglio pulito” - L’alimentatore arretra la barra per evitare delle rigature sulla superficie tagliata quando il nastro torna in alto. Sistema di controllo a bus di campo con doppio microprocessore con collegamento seriale. Interfaccia uten ...

Vacuum extrusion press 'UNIVERSA' PZG 40-40a with 400 mm Ø and 18.5 kW drive (expandable up to 55 kW). Maximum pressing pressure: 30 bar. Extruder incl. PZSVG 35a pre-press with 15 kW drive. Includes base frame with motor clamping device. In regularly serviced condition; last revision in 2022. Previous use: Production of ceramic roof tiles. Available for an extra charge: vacuum generator and various mouthpieces.

Technical data according to Muller Martini

Key data: 2000 KW, 2500 kVA, 10500 V

2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number

Key data: 1600 KW, 2000 kVA, 400 V

Caterpillar 3516 Diesel Generator Set – 2000 kVA | 1600 kW | 50 Hz | 1500 RPM Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516 Alternator: Caterpillar (SR4 series) Year of Manufacture: 2002 Generator Serial Number: 7TN01117 Rated Output: 2000 kVA Power Output: 1600 kW Power Factor: 0.8 Frequency: 50 Hz Voltage: 400 Volts Current: 2887 Amps Phase: 3 Phase Speed: 1500 RPM Excitation Voltage: 22 V Insulation Class: Class H Operating Conditions Duty: Suitable for Prime / Standby / Continuous applications Ambient Temperature Rating: 40°C Maximum Temperature Rise: 105°C (by resistance) Altitude Rating: Up to 1000 meters Condition: Fully operational and generating power This Caterpillar 3516 diesel generator set is a high-capacity, industrial-grade power solution designed for reliable prime and standby po ...

Key data: 1460 KW, 1825 kVA, 400 V

Caterpillar Diesel Generator Set – CAT 3516 Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516 Alternator: Caterpillar SR4 Series Year of Manufacture: 2004 Control System: Non-Electronic Engine Serial Number: 1LZ00634 Alternator Serial Number: 4FN02876 Arrangement Number: 144-1932 Electrical Specifications Rated Output: 1825 kVA Power Output: 1460 kW Power Factor: 0.8 Frequency: 50 Hz Voltage: 400 Volts Current: 2634 Amps Phase: 3 Phase Speed: 1500 RPM Excitation Voltage: 21 V Excitation Current: 5.6 Amps Insulation Class: Class H Maximum Temperature Rise: 105°C (by resistance) Ambient Temperature Rating: 40°C Altitude Rating: Up to 1000 meters This Caterpillar 3516 diesel generator set is a high-capacity, industrial-grade power solution designed for reliable prime, standby, and co ...

10 station grading line Mettler Toledo advanced check weigher Weight range 50g to 8000g Weigh table size - 300mm wide x 630mm long Automated box handling system Complete with loaders Critical spares Overall dimensions 8500mm long x 1400mm wide

Key data: 1498 KW, 1872 kVA, 480 V

Caterpillar Diesel Generator Set – CAT 3516 TA Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516 TA Alternator: Caterpillar SR4 Series Year of Manufacture: 1996 Engine Serial Number: 25Z05435 Alternator Serial Number: 4FN00778 Arrangement Number: 107-7350 Electrical Specifications Rated Output: 1872 kVA Power Output: 1498 kW Power Factor: 0.8 Frequency: 60 Hz Voltage: 480 Volts Current: 2780 Amps Phase: 3 Phase Speed: 1800 RPM Excitation Voltage: 22.3 V Excitation Current: 5.84 Amps Insulation Class: Class F Maximum Temperature Rise: 105°C (by resistance) This Caterpillar 3516 TA diesel generator set is a robust, industrial-grade power solution designed for demanding power generation applications. Manufactured in 1996, the unit delivers 1872 kVA (approximately 1500 kW) at 60 Hz, making it suitable  ...

Caterpillar 3516 Diesel Generator Set – CAT 3516-DITA Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516-DITA Alternator: Caterpillar SR4B Year of Manufacture: 1995 Engine Serial Number: 25Z04872 Arrangement Number: 107-7350 Frequency: 50 Hz Phase: 3 Phase Speed: 1500 RPM Duty: Suitable for Prime / Standby / Continuous applications Condition: Used – fully serviceable and suitable for immediate deployment This Caterpillar 3516-DITA diesel generator set is a robust, industrial-grade power solution built around Caterpillar’s proven V16 engine platform. Manufactured in 1995, the unit features a non-electronic mechanical control system, making it especially attractive for applications where reliability, simplicity, and ease of maintenance are critical. Coupled with a Caterpillar SR4B alternator, this ge ...

Manufacturer: Rehm Model: VXP+ nitro 3500 Year of Manufacture: 2014 Type of Machine: Reflow Oven Electrical Specifications Voltage: 3 × 230 / 400 V Frequency: 50 Hz Power Rating: 79 kW Current: 115 A Cooling & Gas Cooling: 20 l/min, minimum 2 bar Nitrogen Consumption: approx. 21 m³/h Exhaust Air: 400 m³/h Operating Pressure: 6 bar Dimensions & Weight Length: 6.4 m Width: 1.60 m Height: 1.80 m Weight: approx. 2 t Features & Equipment - SMEMA connection - Double track - Automatic width adjustment - Fast cooling unit - Program manager Find more here - .ucymachines/ Contact us at - sales@ucymachines

The system consists of a KHS INNOPAL RK6-350 palletizer from 2004, a KUKA KR 360/1 industrial robot and a Siemens Simatic S7 automation controller. The system is suitable for the automatic palletizing of cartons, bottles or PET-packaged products.