mast used for sale

Description: Lifting capacity 1800 kg Simplex mast lifting frame Height of lift 2490 mm , Assembly height 1650 mm , Battery 24 V / 230 A Charger 24 V / 30A Fork length 1500 mm , Approx. Onsite Dimension. (l x w x h): 660 x 1,900 x 1,650 mm, weight approx.: 1,000 kg

Description: serial number A40400688 operating hours 40.455 h lifting capacity 16.000 kg maximum lifting hight 5000mm mast type duplex 4 operations lift / tilt / sideshift / levelling cylinder dimensions of forks 2500 x 350 x 80 mm pneumatic wheels front axle 4x 12.00R20 rear wheels rear axle 2x 12.00R20 engine: Cummins engine QSB 6.7 168 /2200 kW/rpm Tier IV, stage four starting batery 2x12 v/ 150Ah, alternator 1960V/A torque 945-1500 Nm/rpm with Adblue system Dafo extinguisher system transmission: ZF - 3WG171, torque converter gearbox: hydrodynamic Powershift , number of gears forward/reverse 3 / 3 driving axle : Kessler D81- diferential and hub reduction steering: hydraulic servo - steering weel breaks: service brake system – oil cooled disc brakes - drive w parking brake system – dry, spring activated disc brake – drive wheels cabin: with AC system hydrauli ...

Fabr: Jungheinrich Type: EFG-DH15GE120435DZ Year: 1997 Load Capacity: 1450kg Battery: 24Volt 800A/h Battery weight: 642kg Working height: 4.5m Mast height 2m Fork length 1.2m Hours: 6600h with side shift with charger Electric forklifts

Jungheinrich ERC-Z-12 Load capacity 1200kg Year of construction 2002 Battery renewed in 10/2019 Very good condition, has been regularly serviced Only 333 operating hours with Timetronic charger Bipqiakbhfd Lifting height 4300mm Free stroke 1500mm with initalhub Triplex mast Height 1900mm Emergency stop button

Description: Mast type: triplex Height: approx. 4200 mm Load capacity: 3000 kg Type of drive: Diesel Operating hours: 10500 Free lift: yes Fork positioner: yes Side shift: yes Full cab: yes Rear tires: new Front: approx. 80% Technically known defects: lighting, air conditioning not working, engine oil loss (oil pan or oil seal), side window must be replaced Approx. Onsite Dimension. (l x w x h): 4,500 x 2,000 x 3,000 mm, weight approx.: 5,000 kg

Key data: 2600 mm, 750 mm, 695 mm

with CNC control, Fabr. HEIDENHAIN, type: ITNC 530, travels: X-axis: 2600 mm, Y-axis: 750 mm, Z-axis: 695 mm, NC rotary table 750 mm with hydraulic clamping, NC-controlled stepless swivel spindle with swivel range -98 degrees to +98 degrees, with autom. Tool changer: 50 tool slots + standby magazine with integrated CNC-controlled mast with 180 tool positions, cone cleaning station, max. 1800 RPM, number of axes: 5, tool holder: HSK A63, 3-D infrared touch probe, with IKZ coolant supply, cooling/filter system, Fabr. HEDELIUS, Type: SKM900, Oil Mist Extraction & Chip Conveyor

Description: fork size 560x1150mm load center of gravity 600mm power 0.75KW battery voltage 24V battery 71Ah-5hr 230V to load lifted mast height 39350mm turning radius 1490mm emergency stop battery percentage dual chain emergency button Approx. Onsite Dimension. (l x w x h): 1,710 x 820 x 2,230 mm, weight approx.: 597 kg

Description: fork size 560x1150mm load center of gravity 600mm power 0.75KW battery voltage 24V battery 71Ah-5hr 230V internal charger lifted mast height 3435mm turning radius 1490mm emergency stop battery percentage dual chain emergency button Approx. Onsite Dimension. (l x w x h): 1,710 x 820 x 1,980 mm, weight approx.: 575 kg

Description: fork size 560x1150mm load center of gravity 600mm power 0.75KW battery voltage 24V battery 71Ah-5hr 230V internal charger lifted mast height 3435mm turning radius 1490mm emergency stop battery percentage dual chain emergency button Approx. Onsite Dimension. (l x w x h): 1,710 x 820 x 1,980 mm, weight approx.: 575 kg

Description: Diesel forklift - Diesel particulate filter - Triplex lifting mast - Sideshift - Fork adjustment - Driver's protection roof - Roof window including roof wiper system - many more additional options - New condition Load capacity in kg 2000 kg Stroke 6510 mm Fork length 950 mm Height 2834 mm Operating hours approx. 600 h Machine weight approx. 4.2 t Space requirement approx. 2.65 x 1.3 x 2.85 m Approx. Onsite Dimension. (l x w x h): 2,650 x 1,300 x 2,850 mm, weight approx.: 4,200 kg

Description: The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast, which ensure high operational stability. This model offers comfortable maneuverability and efficient and effective vertical Stackable and is ideal for operation in tight spaces. Load capacity in kg 1200 kg Fork length 1150 mm Lifting height 3300 mm Overall height 2256 mm Machine weight approx. 0.645 t Dimensions L x W x H 1.71 x 0.8 x 2.45 m Approx. Onsite Dimension. (l x w x h): 1,710 x 800 x 2,256 mm, weight approx.: 645 kg

Description: New EP EFL252 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 2500 kg Headroom of 2.15 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. Load capacity in kg 2500 kg Stroke 4.8mm Fork length 1200 mm Battery 80V / 205AH LI-ion Machine weight approx. 3.9 t Space requirement approx. 3.57 x 1.15 x 2.16 m Approx. Onsite Dimension. (l x w x h): 3,570 x 1,150 x 2,160 mm, weight approx.: 3,900 kg

Description: The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast, which ensure high operational stability. This model offers comfortable maneuverability and efficient and effective vertical Stackable and is ideal for operation in tight spaces. Load capacity in kg 1200 kg Fork length 1150 mm Lifting height 2700 mm Overall height 1856 mm Machine weight approx. 0.595 t Dimensions L x W x H 1.71 x 0.8 x 1.96 m Approx. Onsite Dimension. (l x w x h): 1,710 x 800 x 1,960 mm, weight approx.: 595 kg

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Daub baking master 22.5 m and 178 stove is a state in TOP general and thorough outdated. functions as anew. anew steam apparatus. anew elektrik anew hearthstones incl. Daub Thermooel-boiler arrangement sales incl. cargo and assembly on inquiry I also have to sell other uberholt DAUB oven THERMO-OEL price on inquiry contact: + 48 692 345 660 anbox.pl

used pipe points cleaning master / atlas type 02V92 construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no

used injection nozzle cleaning master construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no two machines same to construction exist

Edge master Ney 109 Jr. Ney edge banding machine Ney edge master 109 Jr. GER. Edges Foreign and Inn RADIUS G & 2028-M35PL

we offer for MRI-use... Medrad MRI Dual-Head-Injector Typ: Spectris incl. TESTING FROM OEM Technican - Injector Head PEDESTAL unit - Head control unit - optical Transmitter/Receiver - Display control unit - Master control unit - Operation manual...englisch language - cable/etc. fully tested from OEM technican YOU ARE WELCOME TO INSPECT

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

Daub baking master 27 m² Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request Contact: + 48 692 345 660 anbox.pl

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Round table with C-axis FKD 60, 6000, faceplate diameter capacity 200 to, speeds 60 with manual gearbox ZF, Masterslafeverspannung, 4 spindle motor Siemens 40 kW, speed 1 level 0-10 RPM, 420000 nm 2nd stage 0-60 speed rpm, 115000 NM, circulating oil lubrication system, hydrostatic storage, dimensions: length: 6900 mm, width: 6000 mm, height: 1200 mm, weight 80 t.

Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.

Description Precise forming with quick tool changes. Our axial t form forming machines of type REB are specially suited with forming forces up to 1,300 kN and effortlessly master complex geometries. With up to six forming stages in combination with an intermediate clamping unit, they meet almost all requirements. The operation is simple and intuitive via touch panel. A sequence control makes every single movement of the respective forming stage user-friendly and individually freely programmable. Optionally, we equip our systems with electrical or hydraulic-numerical drives. For very short cycle times, these forming processes can be carried out step by step in transfer plants. The systems enable intuitive flow-based programming. Simultaneous axis movements ensure fast production processes and enable efficient and highly dynamic production. Technical data REB 660 6-60 mm . . .

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Foil wrapping machine for single rods, manufacturer BOEHL type master S-1000 VA. Year of construction 1998 dimensions: 50mm width - 930 mm, height: 20mm - 720 mm. minimum length: 750 mm. Control cabinet with control panel with S 7 controls and safety fence. Operating side is "right". Good condition!

CNC carousel lathe FKD 30, Siemens 840 dsl, machining range-diameter 3500, working height 3000mm, workpiece weight max. 25 tons, driven tools speed 0-3000 rpm, faceplatespeed 0 - 150 rpm, pickup station 5 places. Manufactured in the EU Remarks: 2columns carousel lathe with traversing cross beams, 1 piece ram for rotating and milling (ram 300mm x 300mm) with driven tools, ISO 50 C axis with master-slave bracing Filter system 3000 liters incl. high pressure pump 25 bar 3 chip conveyors

pressure:100 t distance between columns:3000 x 1500 mm stroke:500 mm total power requirement:30 kW weight of the machine ca.:16 t dimensions of the machine ca.:4000 x 2500 x 4500 m Master cylinder:1 Stück main cylinder:135 x 90 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:90 x 50 Ø mm Table size:3000 x 1500 (mit T-Nuten) mm Ram plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mm work height max.:900 mm pre-running speed:125 mm/sec return speed:100 mm/sec Speed printing phase:40 - 8 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mm fied interior wide:3100 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:2 Stk pressure stop valve:max. 200 min Lineal mess stab NOVOTECHNIK:550 mm Table parallelity:0,05 mm / m² Guide rails for parallelism :verschraubt Light sensors front an ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

pressure:500 t distance between columns:1500 x 800 mm stroke:800 mm total power requirement:45 kW weight of the machine ca.:25 t dimensions of the machine ca.:2200 x 2200 x 4800 m Master cylinder:1 Stück main cylinder:500 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:120 x 80 Ø mm Table size:1500 x 1400 (mit T-Nuten) mm work height max.:950 mm pre-running speed:190 mm/sec return speed:200 mm/sec Speed printing phase:20 - 8 mm/sek. Hydraulic block:REXROTH Oil Tank Capacity:1500 l demand for oil:1300 l pressure control:über PLC Daylight Opening:1200 mm fied interior wide:1500 x 800 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:NG pressure stop valve:max. 600 sec Lineal mess stab NOVOTECHNIK:850 mm Table parallelity:0,05 mm / m² column diameter:200 Ø / mm automatic fat lubrication:über Bildschirm einstellbar Guide rails for parallelism :4 fach Light  ...

Center height: 115 mm Center distance: 1000 mm Spindle bore: 40 mm COLCHESTER - MASTER 2500 Universal lathe Ø 335 x 1000 mm MACH - ID 6362 Make: COLCHESTER Type: MASTER 2500 YOP: 1989 Swing over bed Ø    335 mm Swing over cross slide Ø   210 mm DBC Turning Length      1.000 mm Spindle bore       40 mm Spindle power     3 kW Bed width            230 mm Stroke pinole       145 mm Spindle taper        3 Mk Speeds / ranges    2500 Rpm Anilam digital readout Multi fix B + inserts Forkardt F200 chuck Steady rest Coolant system Length     2.000 mm Width         890 mm Height     1.200 mm Weight      &nbs ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis      80,000 mm Feed rate Z-Axis      80,000 mm Sheet master loading arm     Yes Sheet tower storage        Yes Dust collector  ...

Center height: 277 mm Center distance: 2000 mm Spindle bore: 90 mm MACH-id    5421 MAKE         Colchester 600 Lathes TYPE           Mastiff VS YOP             1996 SPECIFICATIONS Swing over bed Ø        554 mm Swing over cross slide  Ø        370 mm Swing in the gap Ø         830 mm Gap length          215 mm Spindle bore         90 mm Spindle power       11 kW Bed width             400 mm Tailstock spindle ⌀   95 ⌀ Stroke pinole       145 mm Spindle taper        6 Mk DIMENSIONS Length        3545 mm Width ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Capacity: 30 t Number of strokes per/min: 0   Day light: 0 mm Front distance between columns: 0 mm CNC Brand: Siemens CNC Model: 840 D MACH-id    5212 MAKE        FinnPower TYPE          C5 Compact Express YOP            2009 SPECIFICATIONS Table load in kG       200 Kg Working area X Axis      2584 mm Working area Y Axis        1270 mm Working area X Axis with override       5168 mm Punching force      30 T Maximum sheet thickness       8 mm Turret position        20 Auto indexing positions        2 x Multi tool Positioning speed X and Y Axis      10800 mm/min. Change speed revolver      166 Rpm  ...

Constant Manufacturer Varta suitable for regeneration of individual battery cells or as a DC source with very constant direct current without stoer influences, e.g. in research at the university. Weight approx. 120 kg Also particularly united as a power supply in laser research. Tags Current stabilization with a more aeusser current resistance Master Slave Voltage adjustment due to aeusser resistance Voltage adjustment due to aeusser voltage Nhowzm38 More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price

Type: 6SE7031-3FG20-Z Description: SIMOVERT MASTERDRIVES SIMOVERT VC, CONVERTER CHASSIS UNIT, IP00 3 500-575V AC, 50/60HZ, 128A NOM. POWER RATING: 90 KW .

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU