mast used for sale

TRUMPF 500 R with full automatization LARGE FORMAT 3000mm x 1600mm In good working condition. Fully regular serviced and maintained -new hidraulic pump in 2023! New/Year: 2000 Included: -sheet master -grip master -lift table Control Unit: -Bosch Punching force: -220 kN

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m GEquipment • Ma ...

Bakery Oven Deck Oven Wachtel Piccolo 1-4 DProduct description:- used- Baker's condition- Manufacturer: Wachtel- Type: Piccolo 1-4 D- Control: DMS 3 Master Timer- Year of construction: 09/2009- elek. Connected load: 19.7 kW- Voltage: 400V AC/3Ph/N/PE/50Hz- with proofer- can be worked from both sides- Floors Dimensions W.: 61 cm, D.: 90 cm, H.: 16 cm- Outside dimensions W.: 102 cm, D.: 202 cm, H.: 218 cmSee pictures for details.

Description: Lot of Electrical Tools 5 units: - ,Drill Würth Master. Model SB 13-XE. Serial number 38719. , - ,Grinder Würth Master. Model EWS 17-125. Serial number 8134912327. Mfg date 2017 - Milling Machine VIRUTEX. Model AS 93 - Rotorbital sander Würth Master. ,Model ETS 150 twin. , Serial number 3745800. Mfg date 2008 - Brush VIRUTEX. Approx. Onsite Dimension. (l x w x h): 700 x 600 x 200 mm, weight approx.: 15 kg

Baler Balemaster EO 399, built in 2012, with tamper Specifications: Manufacturer: Balemaster Europe Type: EO 399 Year of construction: 2012 Hours: 60,924 Drive power: 55 kW Press force: 103 t Filling opening: 1000 x 2000 mm Bale dimensions: 800 x 1100 mm Capacity: 211-495 m³/h Binding: 4-fold, automatic Dimensions: 9900 x 2200 x 2450 mm Weight: approx. 20,000 kg Material: Corrugated cardboard, paper, foil The press was serviced annually and the wear parts were replaced. In 2020, the master cylinder was replaced.

Single batch of plastic raw materials: -16 big bags "Regenerated" - deposited in Rodengo Saiano (BS) -16 big bag "LDPE" - deposited in Rodengo Saiano (BS) -1 big bag "Elite 5230" - deposited in Chiari (BS) -1 big bag "Braskem R7051" - deposited in Chiari (BS) - Pallets of Master Vario warehouse - Macrolene Pink and Green - deposited in Chiari (BS).

x-travel:1300 mm y-travel:1900 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:1650x1300 mm table load:4 t T-slot (width-distance-quantity):22x180x7 mm spindle cone:50 BBT spindle speed:10000 1/min spindle drive:15/18,5 kW Spindle motor torque:526 NM rapid traverse in x-y-z axis:20/20/15 m/min feeds:1~10000 mm/min Tool changer:24 -fach workpiece length:350 mm tool diameter:110/220 mm weight of tools max.:15 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:4900 mm machine width/height:4160×4339 mm Weight approx.:18 t automatic tool changer:24 fach :Gewindebohren ohne Ausgleichsfutter CNC controller:Heidenhain/Siemens/Fanuc gear box:von Barufaldi/Italien CE-design:gegen Mehrpeis möglich (TUEV) inner coolant:30 bar chip conveyor - auger:im Maschinenbet ...

x-travel:2300 mm y-travel:2000 mm z-travel:1000 mm table-size:2300 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:8 t distance between columns:1840 mm distance spindle nose and table:180~1180 mm spindle drive:22/46 kW max. torque on the spindle:140.1/286.5 Nm (S6-25%) spindle nose:50 SK spindle speed:10000 (direkt) U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):7027 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:25 t positioning accuracy:0,020 (gem. VDI/DGQ3441) mm repeating accuracy:0,015 (gem. VDI/DGQ3441) mm CNC controller:Heidenhain TNC 620 automatic tool changer:Optional gear box:BF Getriebe (optional) chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband inner coolant:20 bar CE-design:vom TUEV Used Milling Machine KRAFT VM-3218 with ...

CONTROLS   CNC controls FANUC SERIES 18-M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 850 mm   Y-axis travel: 600 mm   Z-axis travel: 560 mm TABLE   table surface (left-right): 1100 mm   table surface (front-back): 510 mm   workpiece load (max): 750 kg SPINDLE / HEAD   spindle revolutions (max): 8000 /min AXIS DRIVES   rapid traverse X: 24000 mm/min   rapid traverse Y: 24000 mm/min   rapid traverse Z: 20000 mm/min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2450 mm   space requirements -front/back-: 2400 mm   total height: 2815 mm  & ...

CONTROLS   CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   .. among of them simultaneous CNC axes: 5   X-axis travel: 600 mm   Y-axis travel: 450 mm   Z-axis travel: 450 mm   rotating range B-axis from: -115 °   rotating range B-axis up to: 30 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   clamping surface diameter: 450 mm   workpiece load (max): 200 kg SPINDLE / HEAD   spindle revolutions (max): 42000 /min   tool fixture: HSK E40   drive power: 10 kW TOOL MAGAZINE   number of positions: 36 AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 7   number of pallets: 3 ELECTRICAL SPECIFICA ...

Including accessories, cutting head, welding head 150mm, setting master for cutting head and welding head, communication interface external periphery, automatic front door with servo motor, support frame, the right side door has an opening for pipe processing, this must be closed with a sheet of metal on both sides, battery from the PC must be replaced, the software must be reset for normal operation, with Laser Trumpf TruDisk 3302, laser power: 3300W, connected load: 20kVA, weight: 850kg and Cooling Device KLH RL 16/0 SK IEC.

Line for filling, checking, labelling and packing, line includes (1) 2x Form, Fill and Seal Packaging Machine Wolf VCI-250 Master-Tech, year of construction: 2009 (2) Metal Detector BIZERBA MD-Tunnel 350x150 (3) Continuous Horizontal Cartoning Machine ROVEMA CMH-I, connected load: 9.5kW, operating hours: 149h (4) 2x Checkweighers OCS HC, year of construction: 2009, with Inkjet Printer Keyence MK-G and Thermal Transfer Printer VIDEOJET DatFlex 6420.

description: Line consisting of: KHS INNOPAL AS1H KHS INNOLINE PTR (pallet transport),BTR (bottle transport),GTR (pack\box transport) KHS INNOCLEAN EE 52/87 S22K FILTEC FT 49 RLD FILTEC OMNIVISION KHS INNOFILL EM(SVF)120/18 KK Heuft Spectrum TX HBBVXTI60 KHS INNOPAS PIISG 60-175 KHS INNOKET 2090/120-60 LM KT KHS-Metec Promecon 2000 KHS-Metec Promecon 4000 TAP TONE 500 KHS WrapAroundPacker TYPE 320/70 FILTEC OC-300 ARIES PACKAGING Type 906 ser 10 + SFT VWS 45 KHS INNOPAL LORD 2 BSN1 Robopac Robopac genesis DOMINO -520 DOMINO M-Series plus KHS 3-3000/34M Equipment YOM 2011: KHS Container Conveyor BTR KHS Pack conveyor GTR KHS Shrink Packer SP A-H KHS Carry-strip-master CSM 070-3 KHS Pack conveyor GTR Prices: 350.000 Euro for total, except 2011 equipment. 250.000 Euro for equipment of 2011 capacity: 50.000 b/h Besides buying and selling of co ...

Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ra ...

Description: WELDING LINE , 50 1. 2 Mag robot with control Equipmentdata & configurationRobot : 2 Robot KUKA KR 5 arc HW .  ,Serial No. 985515 (MASTER) and 985516 (SLAVE) Control KRC2 YOM 2010 2.Equipment data & configuration Weldingcontrol - 2 sks welding control : Power Source LSQ4. - 2 Control Q8P. - 2 Torch and wire feeder sks. 3. Rolldoor gate - 1 Rolldoor Seuster KG - Type S800oZ - Size 1600 x 2100 mm , 4. 1 Positioner - Positioner three axis Ø4300mm - KUKA KPF3_V2H750 5. 2 Clean unit - J.Thielmann - Type BRG2000 Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,200 mm, weight approx.: 2,000 kg

Description: From an automotive manufacturer due to production changes WELDING LINE 20 , 1. Mag robot with control , Equipmentdata & configurationRobot : - 2 Robot KUKA KR 5 arc HW . - Serial No. 985512 (MASTER) and 985510 (SLAVE) - Control KRC2 2.Equipment data & configuration Weldingcontrol - 2 sks welding control : Power Source LSQ4. - 2 Control Q8P. - 2 Torch and wire feeder sks. 3. Rolldoor gate - 1 Rolldoor Seuster KG - Type S800oZ - Size 1600 x 2100 mm , 4. 1 Positioner - Positioner three axis Ø4300mm - KUKA KPF3_V2H750 5. 2 Clean unit - J.Thielmann - Type BRG2000 6. 1 HMI Siemens MP277  , Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,200 mm, weight approx.: 2,000 kg

Description: Plastic strap with STRAPEX drum, strap length unknown MASTERLINE 480 strapping tool, battery-powered, total of 2 MAKITA batteries, capacity 3.0 Ah, with MAKITA charger Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,100 mm, weight approx.: 60 kg