mast used for sale

28 tools - high pressure pump - no barfeed (but it was interfaced to Iemca Master 880) - Mitsubishi M700 Control

Bunk shop oven / bakery oven Wachtel Piccolo 1-5? Product? Manufacturer: Wachtel? Type: Piccolo 1? Year of manufacture: 03/2013? Condition: used, baker's condition - please clean thoroughly before use? per shelf 1x 60x80 cm sheet metal or 2x 60x40 cm trays? with proofer? Control: DMS 3 Master EM? Electric. Connected load: 25.1 kW? Voltage: 400 V AC/3Ph/N/PE/50 Hz? Floors Dimensions: W.: approx. 80 cm, D.: 66 cm? 1. Floors Height: 20 cm? 2nd - 5th floors Height: 14 cm? Outside Dimensions: W.: 116 cm, D.: approx. 115 cm, H.: 237 cm (with hood)See pictures for details. 

Quail Piccolo 1-5 Floor Store Oven Baker / Bakery? Product? Manufacturer: Wachtel? Type: Piccolo 1-5? Year of manufacture: 08/2011? Condition: used, baker's condition - please clean thoroughly before use? per shelf 1x 60x80 cm sheet metal or 2x 60x40 cm trays? with proofer? Control: DMS 3 Master EM Timer? Electric. Connected load: 26.5 kW? Voltage: 400 V AC/3Ph/N/PE/50 Hz? Floors Dimensions: W.: 60 cm, D.: 85 cm? 1st floor height: 20 cm? 2nd - 5th floors Height: 14 cm? Outside Dimensions: W.: 97 cm, D.: 132 cm, H.: 236 cm (with hood)

Shelf Oven Wachtel PiccoloManufacturer : Wachtel Type : Piccolo I-5Year of construction : 10/2011 Control : DMS 3 Master EM Timer K5 Shelves per floor 1 x 58x78cm trays or 2x 60x40cm trayswith proofer on castors Mobile3N-PE AC 400/50Hz 26,5kWEtagen height : 4x 14cm 1x 20cmExternal dimensions : W: 97cm D: 135cm H: 215cmBaker's condition See picture for details

GIDUE Xpannd 1KF 5K0  Flexo/Offset - label printing machine  Year 2010  Max material Width: 370 mm  Max printing Width: 360 mm Equipment:  Unwinder  N. 5 Offset printing units with ink keys remote control  N. 1 Hot foil unit  N. 2 Flexo printing units (one can be screen printing unit)  N. 1 Rotary die cutting unit with Gap Master  Scrap rewinder  Rewinder Accessories:  Offset printing cylinders: 5x (21" – 22" – 23" – 24" )  Flexo printing cylinders: 2x (21" – 22" – 23" – 24" )

GIDUE COMBAT 370  Year 2005  8 colors  BST web edge control  Kelva web cleaning  8x flexographic printing unit with IST Metz UV drying system (7DW + 1DW retrofitted)  Cooled chill rolls (without cooling system)  turning cross  Delam/Relam  Cold foil  3 punching units, 1x Kocher & Beck Gap Master  BST PowerScope 3000 registration camera  Register control Sensotec  Small roll rewinder Arsoma TR450 with 76mm + 40mm pusher Printing Cylinder x 8 96", 104", 160", 176", 136", 192", 190" Magnetic Cylinder 96", 104", 160", 176", 136"

turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2000 U/min spindle bore: 56,0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7,75 kW weight of the machine ca.: 1950 kg. dimensions of the machine ca.: 2700 x 1200 x 1600 mm from a workshop for the disabled () Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer Peri Trio/Maximo concreting platform 1.20x2.70m, 32 pieces with 60% discount on the new value of 1651,00€/ piece Retail price 660,00€/ pcs. net. The stages are controlled and sorted and ready for immediate use. If you have any questions, please contact Mr. Becker on 0176 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

Bar loader, bar loading magazine, bar automat for CNC lathe, automatic lathe, lathe, master and feed spindle lathe, master and feed spindle lathe, -Manufacturer: FMB, bar feeder -Type: TURBO 5-42/4200/A -Bar diameter: 5 - 42 mm -Bar length: 4200mm -Bar magazine length: 250 mm (Ø 30 mm = 8 pieces) -Dimensions: 5470/800/H1350 mm -Weight: 1250kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

PLC control, central assembly, work memory, CPU, central processing unit, central device, Simotion, motion controller, Simovert Masterdrives Motion Control, Profibus CBP2, Comm Board, communication assembly -Manufacturer: Siemens, Simovert Masterdrives Motion Control -Type: 6SE7090-0XX84-OFF5 -Dimension: 140/115/H25 mm -Weight: 0.1 kg

Lathe, lathe, master and feed spindle lathe, master and feed spindle lathe -Manufacturer: AFM -Turning length: 1200 mm -Swivel O over bed: 460 mm -Swivel O without bed: 620 mm -Rotating O over support: 230 mm -Spindle bore: O 38 mm -Spindle speeds: 22.4 - 1000 rpm -Three-jaw chuck: O 200 mm -Quick change: Multifix steel holder - Tailstock mount: MK4 -Brake: Emergency stop device with foot control -Accessories: incl., see photos -Dimensions: 2420/770/H1260 mm -Weight: 1271 kg

Trusses, trade fair construction, trade fair trusses, lattice masts, partition walls for trade fair stands -Quantity: 4x transport trolleys with partitions and lamps -Equipment: 3x frames, each with 2 pieces lamps size 1500 x 2500 mm -Accessories: see photos -Transport dimensions: 1350/950/H900 mm -Weight: 120kg

HORIZONTAL LATHE DAEWOO PUMA TT1800SY :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iTB - Main Spindle Nose: ASA 6 - Main Spindle Power: 22.4Kw Main spindle bar clearance: 65mm - Turning diameter: 230mm - Turning length: 980mm - Main spindle speed: 5000 Number of Tool Turrets: 2 Number of first turret tool slots: 12 Number of first turret motors: 12 First Turret X-Axis Travel: 165mm First Turret Y-Axis Travel: +- 50mm First Turret Z-Axis Travel: 700mm Second Turret X-Axis Travel: 190mm Second Turret Z-Axis Travel: 720mm Sub-spindle: yes Spindle nose: ASA 6 Sub-spindle speed: 5000 Power against spindle: 22Kw Bar feeder model and brand: Iemca Master 880 HD UP/R Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 3905mm Width: 2050mm Height: 2050mm Weight: 8800Kg

Measuring machine, coordinate measuring machine, thread measuring machine, Master Scanner -Manufacturer: IAC, measuring machine Master Scanner -Type: MSXP 60x25 -Accessories: including calibration and measuring accessories / technical documentation, see photos -Transport dimensions: 900/400/H700 mm -Total weight: 159 kg

Motordumper Motorjapan with built-in bitumen cooker Mastic asphalt dumpers are used to transport mix from the truck to the construction site. The cooker has space for 2 gas cylinders and a hydraulic agitator, the tank has a high-tilt function for emptying The vehicle has been sitting in the dry for several years, battery is defective Engine runs pre-glow and starts immediately. The chassis is manufactured by the company Messersi from Italy, the company still builds dumpers today The body is built by the company Kohlberg /Röhrs Biespingen, so it is already a professional device, nothing self-knitted, the company is a leading manufacturer of bitumen cookers and mastic asphalt dumpers Unfortunately, the brake is probably slightly fixed from the idle time, but should not be a problem for screwdrivers It is equipped with a two-cylinder diesel engine and has a 4-speed gearbox Sale wi ...

Trumpf TruFlow 5000 CO2 Laser Cutting Machine Table size : 1500 mm x 3000 mm Power : 5 kw All maintenance has been done regularly by Trumpf Machine has Lift Master Compact for loading and unloading Chip Conveyor - Closed machine frame with integrated laser unit - Motion unit for high precision processing - Torque drive in combination with direct linear drives - Enclosed beam delivery system - Single cutting head strategy - Chiller - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 5000 - Maintenance-free radial turbine blower - Radio-frequency excitation - Laser control TASC 3 - Laser power control - Logbook function laser Cutting head - Lens cutting head with 250mm focal length - Universal quickchange device for cutting head (UTI) - LensLine with status check -  ...

Year of Built 2012 Installation year 2012 Workpiece size 3050 x 1525 mm / maximum weight 950 kg Generator 4.5 kw Automatic pallet change LOAD MASTER loader Cutting thickness: - mild steel: 26 mm (oxygen) - Stainless steel: 12 mm (nitrogen) - 10mm aluminum nitrogen (air) Axle travel: X-3100mm / Y-1565mm / Z-150mm Fast travel speed: X and Y - 100m / min Fast travel speed: Z - 65m / min Max feed 50m / min 7.5 inch (2x) 7.5 inch auto focus head Automatic edge / plate detection (automatic rotation) Mitsubishi 4500 Watt cross flow resonator (peak power of 5000W pulse) CO2 laser CO2 / CO / N2 / He = 8/4/60/28 Laser gas consumption 3 liters / hour Double cutting function allows surface removal and cutting on inferior materials and protected sheet metal Edge punching function Control of slag reduction in corners Retraction of the head by normal, cross and arc method 90% ene ...

Key data: 650 mm, 600 mm, 500 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany until week 49 / 2023 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ  ...

The opportunity! As good as new pre-press flap press with cross binding Hydraulic master cylinder resealed! With security key system! Fully functional, every service performed, still in operation, without a conveyor belt! Viewing possible at short notice by appointment! Subject to prior sale! Purchase including dismantling and loading

complete production plant for shopping bags and bean handle/open mouth. System composed of: Tecom extruder 2 Flexo Stack Omat flexographic prints + Bielloni Mobert welder 2 Elba + Kmt die-cutting machines 2 Manzoni inline printing plants Semi-automatic flexible handle machine Flexloop” TECOM EXTRUDER rotating head, inverter motors consumption in operation 9kw/h Production yield 40Kg/h. Integrated castle, motorized tow adjustable in height and modified for sheds up to 4m. Mixer, dryer, automatic master doser, UV ray printing treatment. New wiring and thermoregulators. Minimum band 18cm Maximum band 80cm Bivalent screw: extrudes HD/PLT/BIO COMPOST Machine in operation MOBERT Victory 800 Bio compost ready” WELDING MACHINE Totally overhauled and updated. Change from open mouth/bean bags in one click. Inverter/PLC/Touch screen control panel. Up to 3 tracks. Min cutting l ...

1 used bread roll line Manufacturer: König Maschinenbau Austria Type: Eco 5000 Machine completely readjusted! New Steam Cylinder! New UV disinfection! Belts and troughs in good condition! The machine has been cleaned and is ready for immediate use! Viewing and test run possible at any time! Sold only to professionals. Only the written purchase contract is binding! The brands and characteristics mentioned here are only used to describe the product. If you have any questions, please feel free to call or send an email at any time! The machine can be supplied by our own fleet of vehicles (at a cost), or sent via freight forwarder! It is also possible to organise a commissioning with a master baker! In accordance with EU law, we would like to point out that we do not assume any guarantee, warranty, liability for material defects or the like. This does  ...

3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Fanuc 310i, Country of origin: Italy, Operating hours: 34.000 | 22.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

Used rotary adhesive labeling machine PE Universal 16T up to 6000 bph In the bottling industry the efficiency and precision that the Used Adhesive Rotary Labeler PE Universal 16T brings to the production line are paramount Introduced by P E Labellers this rotary adhesive labeling machine known by its model number UNIVERSAL 16T 1120 4S 4E was launched in 2005 and has since established its reliability and performance consistency notably handling up to 6000 bottles per hour bph Sophisticated Design Capacity Constructed for glass containers particularly with formats supporting 1 0 L the robust design reflects its capacity to sustain high volume production workflows With its 16 plates functionality the rotary adhesive labeling machine ensures uniform application and distribution of work a technical detail that resonates well with experts seeking minimal downtime and maximum throughput The mac ...

Used Filling Line For 5 And 10 Liters Pet Bottles 2005 The line is structured to permit the production of da 5 0 L e 10 0 L PET bottles Approximate capacity 800 BPH on 5lt and 450 BPH PET Containers The line has filled in a total of less than 10000 bottles It was then not used as the contract stipulated with the final client was canceled and the company owning the machines was not interested in creating a new market for such a product The mechanical parts are practically new Besides the usual change of the gaskets for the valves will be required as they get dry after a time the line does not work and there might be some electronic adjustment of the palletizer to be done based on the formats the final buyer will want to produce Otherwise the line was inspected and all is in order The line is composed of the following machines Pre forms orienting system and transport to the pre heating tun ...

HURCO VMX 50 machining center. Year 2003, 20.000 hours of use. Used for the manufacture of aluminum molds in a small company. Programming with Mastercam and on machine with both conversational and ISO system. Traverses of 1.200 x 600 x 600. 24 tool changer Touch screens, keyboard and mouse. Connectivity through 31/2 floppy disk drive and RS-232 ports. 16 GB hard disk Both external and internal cooling. 10.000 RPM/Max BT-40 New head and axles skids Perfectly maintained. All documentation is provided since purchase. Not in disuse. It is sold due to cease of business. It is started at least weekly. It can be seen and tested perfectly.

#3221 Label Converting - Rotary's Cutter Manufacturer: F.I.T Fellinger Industusrieelektronik - Germany Type: ST 400 Age: 2006 Available: Immediately Location: Germany - Width: 410 mm - BST Web Guide - The Arsoma 410 cutting unit - GAP Master Kochand Becker - Machine Control Panasonic - Servo Motor Control Lense - Unwinder: 500 mm, Shafts: 25/40/76 mm - Upwinder: 500 mm, shaft 76 mm - Label Miss Control - Cutting Unit - Edge Cutting and Suction - 2 x Matrix Rewinder -Crane Machine will come without die cutting cylinders

4 floors for 4x trays 60x40cm with proofing cabinet with exhaust hood incl. condenser DMS 3 master timer control Top and bottom heat separately adjustable power: 16,5 kW 400V / AC /3Ph / N / PE / 50 Hz Dimensions: Height: approx. 210 cm width: approx. 98 cm depth: approx. 100 cm floor entrance height 14cm

General SKU300U605 LocationBarneveld MakeGS Coating System TypeHT/M3 No.HT-2191 Year of construction1995 Main Features MaterialStainless steel Motor0.22 KW Inlet diameter80 mm Specified Features - Coating pan MaterialStainless steel 1.4401 (316) Coating pancheck Capacity2-4 Ltr. Pan diameter450 mm In-/Outletdia. 80 mm Motor0,22 kW, 380 volt With frequency controllercheck With electric heatingcheck With fancheck Motor0,25 kW 220/380 Volt With spraying armcheck With dosing pumpcheck (Masterflex Model No. 7523-35) Information Mounted on wheelscheck With switchgearcheck Total height1,65 m Weight450 kg CEcheck Floorspace1,04 x 0,80 mCoating pansGS Coating SystemsCoating pans > Coating pansBrand > GS Coating Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU050Y334 LocationBarneveld MakeNetzsch Mastermix Aldridge TypePMD-200 Year of construction1992 Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1230 Ltr. Motor55 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselPolymer Preparation Mixer (1x) Capacity1230 Ltr Vessel sizesdia. 1130x1250mm, Flat bottom Dished top sidecheck Manholedia. 300mm Top connections(6x) Outletdia. 85mm With jacket(150 Ltr) Max. temperaturejacket 95 Degr. C, Vessel 125 Degr. C. With anchor stirrerscraper stirrer Motor17,5 KW, 380 Volt (Ex) Speed mixing shaft15 Rpm With homogeniserHigh speed disperser hydraulic driven Motorhydraulic drive unit 55,0 KW, 380 Volt (Ex) Information Mounted on legscheck ATEX compatiblecheck Extra Specifications- High spee ...

General SKU054F306 LocationBarneveld MakeWerner & Pfleiderer Stuttgart TypeUK-80 K4UH No.163 258 / 483 188 Year of construction1979 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume80 Ltr. Specified Features - Z-blade mixer MaterialStainless steel 1.4571 (316Ti) Z-blade mixer(1x) Capacity170 Ltr, Useful capacity 80 Ltr Trough sizes515x525x600mm With covercheck With jacketcheck Max. temperature350 Degr. C. Double geared(hydraulic driven, power pack is missing) With adjustable packing glandscheck Hydraulic tiltingcheck With hydraulic unitcheck Motor2,0 KW, 220/380 Volt Information Mounted on foundationcheck Floorspace2,8x1,2 M Total height1,9 M Weight2450 KG Extra Specifications- With additional set masticator arms Minerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmace ...

General SKU082Z322 LocationBarneveld MakeWerner & Pfleiderer, Stuttgart TypeUK-14 X/AU No.154 576 Year of constructionunknown Pressure Working pressure6 Bar Main Features MaterialMild steel Volume200 Ltr. Motor17.5 KW Specified Features - Kneader Jacketcheck Max. temperature220 Degr. C. Screw speed20/40 Rpm Arm speed27/20 Rpm (front/back) Capacity250 Ltr, Useful 200 Ltr Double shaft kneaderMixtruder (1x) Masticator-armscheck Trough sizes740x685mm With covercheck With screw dischargecheck Motor30,0 KW, 380 Volt Motor11,0/17,5 KW, 380 Volt MaterialMild steel Information With switchgear(Dim. 80x40x180 CM) Floorspacekneader 2,8x1,4 M Total height1,6 M Weight3200 KG Extra Specifications- Dimensions drive unit 1,4x1,0x1,7 M (LxWxH), weight 2130 KG Technical specs Extra informationtest pressure is achieved at 220 Degr. C.KneadersWerner & PfleidererKneaders > K ...

General SKU186K643 LocationBarneveld MakeWerner und Pfleiderer TypeLDUK 6 - IInS No.111045 Year of construction1962 Pressure Working pressure10 Bar Main Features MaterialMild steel Volume18 Ltr. Motor7.5 KW Specified Features - Kneader Jacketcheck With variable speed drivecheck Arm speed21,6-97,2/28,2-127 Rpm Capacity18 Ltr. (usefull 8 Ltr.) Double shaft kneaderdispersion kneader (1x) Masticator-armscheck Single gearedcheck With adjustable packing glandscheck With covercheck Motor7,5 KW MaterialMild steel Information Extra SpecificationsPneumatic tilting, With top ram (pneumatic), Mounted on frame, With switch, Floorspace 1,8x1,4 M, Total height 2,0 M. KneadersWerner & PfleidererKneaders > KneadersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...

General SKU300U1186 LocationBarneveld MakeVibratori and Krämer metallwarenfabrik AG Type3 master and TYP 80 No.2.402 Year of constructionunknown Main Features MaterialStainless steel Length670 mm Width145 mm Specified Features - Vibro feeder MaterialStainless steel 1.4306 (304L) Vibro feedercheck Feeder width145 mm Feeder length670 mm Feeder height40 mm Closedcheck with transparant cover With hopper±70 Ltr. Inlet720x580 mm OutletDia. 35 mm With vibro motorcheck With motor230 volt With variable speed drivecheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight160 kg Floorspace2x0,65 m Total height1,5 m Extra Specificationsthe vibro gutter is provided with 4mm holesVibro feedersKrämer AGConveying systems > Vibro feedersBrand > Krämer AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

Key data: 45

Extrusion line for 3D monofilament composed of: - Extruder 1 spindle, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With drying hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretch: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large reel unwinder and double rewinder for small reels. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Important set of BLAAHOLM 100T welding positioners consisting of: 5 idlers welding positioners with double bandage, capacity 100T, year 2013 5 motorized welding positoners with double-bandage, capacity 100T, year 2013 2 fit-up welding positioners with single bandage, capacity 100T, year 2013 3 idlers welding positioners with double bandage, capacity 100T, year 2018 (New condition) 2 motorized welding positioners with double-bandage, capacity 100T, year 2018 (New condition) 1 fit-up welding positioners with single bandage, capacity 50T, year 2018 (New condition) This set was operated by a company producing Wind Tower wind turbine masts The equipment can be sold together as a batch or separetely in sets.

Machine: NETSTAL 550 T 5500-4200 EVOS Year: 2010 Number of hours: 7000H Closing Closing force: 550 T Opening stroke: 900 mm Between columns: 1020 x 920 mm Mini / maxi mold: 600-1050 mm Max distance between plates: 1950 mm Injection: Screw diameter: 80 mm Screw length: 27 D cm3: 1608 Bars: 2400 General: Engine power: 132 KW Heating power: 94 KW Closing weight: 32 tonnes Injection weight: 8 tonnes Dimensions length: 9.83 m Dimensions width: 2.54 m Dimensions height: 2.35 m Options: Cores: 2 Robot interface: yes E 67 Bi metal: yes 12 pneumatic controls 16 hot runners Colorator interface; bi-material interface; compression injection interface Graph track Power master type lamination

Tecom extruder rotating head, inverter motors consumption in operation 9kw/h Productive yield 40Kg/h. Integrated castle, motorized tow adjustable in height and modified for sheds up to 4m. Mixer, dryer, automatic master doser, UV ray printing treatment. New wiring and thermoregulators. Band min 18cm Max band 80cm Bivalent screw: extrudes HD/PLT/BIO COMPOST Visible under power in Italy

BWU 1100 (2015) BWU 1100(2017) Max air pressure: 600 kPa Euroline – optimized for in- or off-line garbage bag production • Basic converting line for garbage bag production including a non driven C-folder • In- or Offline configuration – with or without surface unwind • Flexible unit, easy to operate and maintain • Servo driven • A combination of well proven FAS Converting units • Sealing from two sides with single sealing bars • Unique tensionless sealing system • Optional equipped with – PP-insert and TU220 tape unit Information taken from the documentation online (also attached to this listing) Master roll max diameter, mm [in]: 800 [31.5] Web width sealing max, mm [in]: 1060 [41.7] Bag length, min-max, mm [in]: 600-3000 [23.6-118] Machine speed, m/min [fpm]]: 20-100 [65.6-328] C-folding, mm [in]: 220-620 [8.7-24.4] Cycles/min, max : 160 W ...

Heidelberg XL 105-6+LX2, Year: 2006 Counter: 209 mio Available: IMMID IMMDI., Condition is good, under Heidelberg full service, no damages and repairs., CP2000, Master level., Suction-tape feeder table, Antistatic feeder (Eltex), Double sheet detection - electronic, AutoPlate Advanced, CombiStar, Technotrans beta. c, water cooling, Ink temperature control, Alcolor Dampening System, Automatic Impression-cylinder washing device, Automatic Ink-roller washing device, Automatic Blanket washing device, Coating unit with chambered doctor blade system, CoatingStar - coating supply, Extended delivery, DryStar3000 Combination - IR and Hot Air, Non-stop Feeder and Delivery, CleanStar Compact, Powder sprayer AP500, AirStar Pro, water cooling, ScrollStar, Year: 2006 Counter

Key data: 520 mm, 625 mm, 5000 1/min

Manufacturer: Gildemeister Model CTX 420 V 3 Year of construction 2004 Condition Used Control Heidenhain iT Specifications Circulation diameter 565 mm Turning length 625 mm X-travel 260 mm Speed range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW Max. torque 270 Nm Spindle nose 170h5 Rod diameter 65 mm C-axis 0.001° Revolver Stations 12 pos. Tool holder VDI 40 Driven tool stations 12 pos. Speed driven tools 4500 rpm Drive power driven tools 12 kW Max. torque 27 Nm Tailstock mount MK 4 Rapid traverse X / Z 60 / 45 m/min Total power requirement 55 kVA Machine weight approx. 6.0 t Space requirement approx. (without bar feeder) 3495 x 2484 x 1885 mm Accessories/Equipment Bar feeder 3200 mm Iemca Master 880 MP-E Conveyor Parts catcher Conveyor belt C-axis Driven tools Collet Chuck Hainbuch 3 Röhm jaw chuck Too ...

Codimag VIVIA 420 – letterpress printing with turret rewinder Year 2006 Working width: 420 mm 6x Letterpress 1x Flexo 7x UV (ACTUAL) 1x punch with GAP-Master (GAP-Master in 2022) renewed ▪ SERAME Turret Rewinder - finish directly inline

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Automatic loading system HS # 172 (workpiece weight up to 5 kg, stack height up to 180 mm),, Automatic set-up of the machine (automatic saw infeed axis, saw stop for diameter control, audio probe Measuring device for automatic probing, etc.),, Standard software package for tooth geometries after tooth shape summary,, Software for grinding saw blades with group teeth, with different tooth geometries,, Software for replaced and broken teeth,, Data entry station for the sawblade data, with touchpanel,, Device for internal coolant supply using oil,, Coolant collecting pan including grids for the machine,, Coolant co ...

With the Bucher press, you can automatically link the 4 phases of a complete cycle: filling, pressing, emptying, washing. • 25% greater efficiency • Personnel gain • Mastery of your process. The press adds to the important drainage function, particularly useful for fresh, pumped over, crushed, destemmed (vintage) grapes... In addition, they are equipped with automatic filling: only one loading point and automatic division of the grapes in the cage . With fresh, crushed or destemmed grapes, more than 75% must can be obtained with just the filling action. They mainly consist of a slightly inclined cylindrical cage (made of laminated polyester resin and fiberglass), in which two plates move on a central screw. Depending on the direction of cage rotation, the plates move closer (compression) or move apart (decompression). Depending on the type of grape, 3 or 6 compressions will be p ...

Key data: 2500 mm, 3 mm

powerful crankplate shear WMW ScTP 3.15x2500 - Precise cutting with 10 tons of cutting force - With the powerful cranked clasp shear from WMW, type ScTP 3.15x2500, we offer a reliable cutting machine for precise sheet metal processing. With a cutting force of 10 tons and a torque of 27,500 kgcm, these guillotine shears are ideal for various applications in sheet metal working. Specifications: - Manufacturer: WMW - Model: ScTP 3.15x2500 - Cutting force: 10 tons - Torque: 27,500 kgcm - Sheet thickness: 3.15 mm - Maximum material strength: 50 kg/mm² - Power consumption: 3.5 kW (see nameplate for more data) - With an impressive cutting force of 10 tons, the WMW ScTP 3.15x2500 effortlessly masters sheet thicknesses up to 3.15mm. - The crankplate shears deliver precise cuts that still meet the highest quality standards. - The robust construction and powerful torque make th ...

approx. 21 lockers with electronic lock – used- : Price per unit ex site: 175.-€ (net)! Price per unit for complete acceptance: 150.-€ (net)! Manufacturer: unknown Type: Unknown Manufacturer: Lock: Keya Metrics: Height: 100 cm Width: 45 cm Depth: 60 cm Specifications: Electronic lock for multiple users, code freely selectable each time it is locked. Ergonomic keyboard Powered by 4 AA batteries 10,000 possible combinations. 50,000 cycles of use Visual warning when the battery is low Opening and closing with 4 digits Master & Inspection Code Condition: good Available: now Location: D

Robust, high-quality welding rotator with a load capacity of 10 tons. Diameter range: 100-4000 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.

With this rotator, the workpiece can be fixed and rotated in the correct position without a crane. By using the traditional positioning can be replaced. Occupational safety and treatment are optimized and cycle times are reduced. In the best case, the time requirement can be reduced by up to 20%! Includes wired remote control and foot pedal. The device has a master-slave function, which allows several driven units to be synchronized with each other. This can be important if later the capacity should be increased. When not in use, you can simply put the device in the corner and save space. The device is easy to transport to external workstations.

Robust, high-quality welding rotator with a load capacity of 5 tons. Diameter range: 100-3500 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.