mast used for sale

Rotary table with C-axis Face plate diameter Ø4000mm Load capacity: max. 50t speed 70rpm Master-slave tension on C-axis 2 Siemens motors each 40kW (on C-axis) Without machine control

We offer props Doka Eurex 30 Top 250, used, original Doka 3 star rental stock quality ! Doka Eurex 30 top 250, used - 27,90€/pc. Doka stacking pallet 1.55x0.85m, used - 115,00€/pc. - 40 pcs. in stacking rack. All supports are controlled and sorted and are suitable for higher value uses. The props are only delivered in stacking pallets. All prices excl. VAT + transport If you have any questions, please do not hesitate to contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

Rotary table with C-axis and Y-axis Face plate diameter Ø4000mm Y-axis travel: 2000mm Load capacity: max. 50t speed 70rpm Master-slave tension on C-axis and Y-axis 2 Siemens motors each 40kW (on C-axis) 2 Siemens motors on Y-axis Without machine control

Rotary table with C-axis Face plate diameter Ø4000mm Load capacity: max. 50t speed 70rpm Master-slave tension on C-axis 2 Siemens motors each 40kW (on C-axis) Without machine control

labeller P.E. | 6T 2S 2E Year: 2004 Speed: 4.000 bph Direction: Counterclockwise Model: MASTER M 6 heads 2 adhesive stations Safety protections

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlife el ...

This YASKAWA MA2010 Welding Station Robot was manufactured in the year 2019 in Japan. It is equipped with a Lorch S8 RoboMig XT control unit and with a DX200 Master controller. The machine dispose of a Torch cleaner (BRG2000D) and 2 positioners (DK-2500-R1000) with Servo tracks (FB500).

This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC RB400CN.

We offer Doka Multi-Purpose Bar Top 50 with 80% discount New value = €14,035.50 Package price: 2800,00€ net. Out-of-the-box Pcs. Designation 7 multi-purpose bars WS10 Top50 0,50m 18 Multi-purpose bars WU12 Top50 2,50m 1 multi-purpose bar WS12 Top50 2,75m 1 multi-purpose bar WU12 Top50 3,00m 8 multi-purpose bars WU12 Top50 3,50m If you have any questions, please contact Mr. Becker on 0049 176 70044689 Offer only valid while stocks last! Subject to prior sale! Loading: free of charge from our warehouse Transportation: Can be arranged on request. The transport price depends on the required loading meters, weight and distance and is calculated individually. Payment: cash payment on pick-up, transfer before pick-up. All prices excl. VAT + transport. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration a ...

Doosan G15S-2 Forklift truck Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

wheel alignment scissor lift 5t, galvanized, Specifications: Stroke underfloor 1,800mm, stroke above-ground 2,160 mm Overall length 5,200 mm, overall width 2,300 mm, ramp height 360 mm, platform length 5,200 mm, Platform width 729 mm, motor power 3 kW, electrical connection 230/400V, 50 Hz, compressed air connection 6-8 bar, Lifting time 45 sec., lowering time 45 sec. Characteristics: Electro-hydraulic drive,2 maintenance-free hydraulic cylinders, No mechanical connections between the rails,Maintenance-free roller lafers, HD unit integrated in the control panel, operation via push buttons with integrated storage option, Integrated hand pump and emergency lowering in case of power failure, Hydraulic synchronization system with automatic level compensation (master-slave system)Pneumatic set-down device with automatic pressure system. Unlocking, non-contact inductive proximity swit ...

Length minimum: 2500 mm Length maximum: 5000 mm Capacity round: 1270 mm Capacity square: 1270 mm Thickness maximum: 6 mm LKI 250 loading arm PR 250 un-loading arm Storage Tower    Table load:                      150 Working area X Axis:             2500mm Working area Y Axis:             1270mm Working area X Axis with override:5000mm Punching force:                  20T Maximum sheet thickness:         6,4mm Turret position:                 31 Auto indexing positions:         3 Positioning speed X and Y Axis:  128.000mm/min. Change speed revolver:          &nbs ...

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

Gravimetric dispenser Brand: Maguire. For 4 different materials plus master dispenser. No electrical panel.

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...

We offer a Doka Frami wall and foundation formwork 206,505m² complete with many accessories. The formwork is 90% newly covered with new Finply birch cladding 220- 240g/m²phenolic resin coating. The rest of the elements are checked and sorted and covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. New value approx. 160.592,60€, special net price 41.498,15€ Piece Description 19 Frami Xlife-Element 0.30x1.50m new plywood 2 Frami Xlife-Element 0.45x1.50m new plywood 51 Frami Xlife-Element 0,60x1,50m new plywood 35 Frami Xlife-Element 0.75x1.50m new plywood 2 Frami Xlife-Element 0.75x1.50m used top xlife 7 Frami Xlife-Element 0,90x1,50m used top xlife 6 Frami Xlife-Element 0.90x1.50m new plywood 11 Frami inner corner 1,50m 20cm inner corner 7 Frami outer corner 1.50m outer corner 1 Frami hinge corner A galvanized  ...

Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: 1 fixed 2500x600mm 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations

Description gravimetric dispenser production: 30 Kg/h hopper capacity: 7 dm3 x 4 hoppers hopper 1 regenerated hopper 2 natural hopper 3 -4 masterbatch/additive with microdosing

Description gravimetric dispenser production: 30 Kg/h hopper capacity: 7 dm3 x 4 hoppers hopper 1 natural hopper 2 regenerated hopper 3 -4 masterbatch/additive with microdosing

Description gravimetric dispenser production: 30 Kg/h hopper capacity: 7 dm3 x 4 hoppers hopper 1 regenerated hopper 2 natural/virgin hopper 3 -4 masterbatch/additive with microdosing

Description control unit for molds: 5 zones microcontroller: Temp Master III output voltage: 230V / 24V temperature range: 0-599 C

Description volumetric dispenser production: 0,5-7,2 Kg/h with 16x16 auger, 38:1 reduction gear master hopper capacity 12 dm3 central hopper capacity: 17 dm3 mixer capacity : 3 dm3

Combi sheeting machine Second-hand machine - overhauled by a specialist 6 months warranty at call Properties: + mobile combination sheeting machine + Year of construction 1999, workshop overhauled 2023 + suitable for all types of dough for rolling out and touring + equipped with new felt and linen tapes and scrapers + equipped with extendable roll-out table as an extension + all relevant parts have been refelted + with flour container + with trawl net & corrugated mat for beating dough pieces, rolls or breads + with long roll station at the bottom for all doughs for long rolling + Carrier belt for high transport (approx. 83 cm height) of the elongated rolled dough pieces + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our master baker + comes with instruction  ...

Machine overhauled & repainted by an expert 6 months warranty Properties: + mobile combination sheeting machine + for all types of dough for rolling out and touring + with circular moulder / circular actuating beam for Seewer Rondo SKO + with new felt and linen tapes and scrapers + relevant parts have been refelted + with trawl net & corrugated mat for wrapping dough rolls or breads + with long-acting station at the bottom for all doughs for long rolling + with high conveyor belt for breads + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine has been finally tested by our master baker & confectioner Technical data SKO 63: Belt width: 615 mm Roller width: 630 mm Roller opening: 0.1 to 30 mm Synchromesh Technical data Rondex: - Rondex length: 154 cm - Insertion height Rondex: 175 c ...

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smallest batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days Specifications: - Flour capacity: 1 - 8 kg - Dough capacity: 1.5 - 12 kg - Boiler volume: approx. 20 litres - Motor p ...

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smaller batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for small batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days

Machine Mechanics overhauled & repainted 6 months warranty on mechanics Advantages: + Solid construction, perfect condition, very smooth running + immediately available + mobile machine, on height-adjustable feet, with fixed boiler + Stainless steel boiler and spiral + Flour dust cap, with automatic switch-off + with CS-03 membrane keypad with recipe programming + with infrared dough temperature measurement + Boiler left/right run + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our two master bakers + comes with instruction manual Specifications: - Year of construction: 2002 - Flour capacity: max. 75 kg - Dough capacity: max. 120 kg - Boiler volume: 180 liters - Ø boiler: 750 mm - Boiler height upper edge: 805 mm - Engine power: 8 kW (kneading spiral & b ...

New cooling water distributor 25 duct with very high-quality components - ready for connection The manifold was made for a large vacuum system, which was then not accepted. It was made in 09/2018 and then fully shrink-wrapped and packed in a box. Today the distributor was unpacked for photos. - 25 cooling circuits - 3 x ifm SM8000 magnetic-inductive flow meter - 22 x ifm SM6000 magnetic-inductive flow meter - 4 x ifm AL1222 IO-Link master with EtherNet/IP interface - A VA ball valve from ECON at the supply and return, 50 pieces in total (different sizes) - a Swagelok proportional RL3 overflow valve on each channel (various dimensions) - Pressure and temperature measurement in flow and return - Swagelok fittings The distributor is about 3m wide. It can be viewed by appointment in Dreye near Bremen

Recording ISO 30 Connection BIESSE and possibly MASTERWOOD Ratio: approx. 1 : 0.7 Saw blade holder 35 mm, with side hole approx. 6 mm on pitch circle 50 mm Max. saw blade diameter approx. 165 mm BIESSE No: 9405A056

HITECSA DXCZ/FTBZ 501 Tropic (2x) Brand:HITECSA Type:DXCZ/FTBZ 501 Tropic (2x) Stock number:M23-7112 Cooling capacity:30.0 kW Application:Cooling Number of fans:2 + 2 Refrigerant:R407C Refrigerant Content:4 + 4 kg Voltage:400 Volts Power consumption:5 + 5 kW Dimensions:950 x 374 x 1143 mm Year:2018 New/unused Number in stock:8 piece(s) Price:Quotation request Description: New unused A.C. units in Tropic (+55°C) version, ideal for extra warm ambient temperatures. This A.C. installation consists of 2 indoor and 2 outdoor units. They cannot be sold separately, because the control is only in the Master unit. The total capacity varies from 21kW to 30kW, depending on the outside temperature. Visit also our website: used-refrigeration

Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...

Key data: 60

Extrusion line for the manufacture of forest protector 90 mm composed of: - Extruder 1 spindle brand: Flag, 60 mm Ø 25 L/D, motor: 37 Kw (50 hp). With variable speed drive, electrical panel and stainless hopper with master dispenser. - Stainless steel cooling tub: 2 m with 2 vacuum pumps: 4 Kw (5.5 hp) each. - Towing trolley: 1300x130 mm, brand: Cincinati Milacron, engine: 5.5 Kw. - Die-cutting machine and shear with hydraulic group: 4 Kw (5.5 hp), tank: 75 liters.

M-BUS Logger with Power Supply BERG MBL25b M-Bus Master for 25 terminals,128 MB Flash Interfaces: 1x RJ45, 1x RS232, 1x RS485 Supply voltage: 18 -30 V DC, max. 0.7 A Power supply: TDK LAMBDA DSP10-24 Input: 100 - 240 V AC, 47 - 63 Hz, max. 300mA Output: 24 V DC, 10 W used, tested ! Dimensions ( data logger ): 91 x 88 x 58 mm Dimensions ( power supply ): 91 x 17 x 55 mm

High-pressure sodium lamp, 5 pieces 2x OSRAM VIALOX® NAV-T 400 W SUPER SON-T PLUS Power: 400 watts, voltage: 100 V < br /> 3x PHILIPS MASTER SON-T PIA PLUS 400 W E Power: 400 Watt, Voltage: 105 V Base: E40 length: 188 mm diameter (glass bulb): Ø 46 mm, length: 230 mm Total length: 280 mm New ! Dimensions( packaging ): 400 x 160 x 140 mm

Electronic Module SCHNEIDER, AEG BIK116 SFB-Master 24V//2X5VDC New ! Dimensions (packaging): 290 x 200 x 50 mm

Electronic Module SCHNEIDER, AEG BKF102 Modnet 1/IS Master 6065-042.703 580 New ! Dimensions (packaging): 290 x 200 x 50 mm

Mobile machine feet, 4 pieces FOOT MASTER GD - 100 F Total load capacity (4 pieces): 1500 kg wheel diameter: Ø 75 mm wheel width: 28 mm Material: black polyamide Plate dimensions: 96 x 96 mm swivel base: Ø 68 mm Material: Rubber New ! Dimensions(single foot): 145 x 100 x 120 mm Dimensions (packaging): 300 x 210 x 140 mm

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...

Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard  ...

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, CAPACITY: 100-3.000 KG.

Electrocorundum, 11 samples FEPA Mastergrid F series Grain no.: 230 / 240 / 280 / 320 / 360 / 400 / 500 / 600 / 800 / 1000 / 1200 Bottle content: 100 ml New, with documents ! Dimensions ( single bottle ): 55 x 43 x 75 mm Dimensions ( packaging ): 290 x 110 x 80 mm

Bread system for free-pushed bread Hourly output approx. 3000 kg Length of the plant approx. 120 meters Year of construction 2006-2017 Composed of: - Reimelt weighing - Diosna Wendelkkneader Liniearseystem WV 400 A KN2 - With cage and 4 tank cars built in 2011 - Diosna Lifting Tipper - Diosna pre-portioning - Benier Dough Masts (2 pieces) - Benier long scooter - Kemper circular knitter - Kaak proofing cabinet with cutting station and transfer to oven - W.P. Mesh belt furnace 60 meters - Bread removal and removal - Cooling belts for cooling - Kaak double spiral cooling (new belts) - Fuji packaging from 2017

Bakery Oven Deck Oven Quail Piccolo 1-4 DProduct description:- used- Baker's condition- Manufacturer: Wachtel- Type: Piccolo 1-4 D- Year of manufacture: 03/2009- Control: DMS 3 Master Timer- elek. Connected load: 19.7 kW- Voltage: 400V/3Ph/N/PE/50Hz- with proofer- can be worked from both sides- Floors Dimensions W.: 61 cm, D.: 90 cm, H.: 16 cm- Outside dimensions W.: 102 cm, D.: 207 cm, H.: 218 cmSee pictures for details.

Ratiostretch RS10/2 Height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm maximum rewindable product weight:2000 kg maximum wrappable product height: 2330 mm maximum wrappable product basic dimensions 1100x1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Lifting carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture 2012 weight: 480 kg Foil width: 450-500 mm Foil diameter: 240 mm Roll weight: up to 20 kg Foil thickness: from 7 µm Current mounting: embedded in floor, optional drive-on ramp available Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Max. Palettenabmessungen: 1100 x 1200 mm Max. Palettengewicht: 2000 Max. Palettenhöhe: 2330 Drehtellerdurchmesser: 1650 Masthöhe: 2540 Drehtellerhöhe: 85 Width in mm: 1650 Länge in mm: 2600 Construction y ...

turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2000 U/min spindle bore: 56,0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7,75 kW weight of the machine ca.: 1950 kg. dimensions of the machine ca.: 2700 x 1200 x 1600 mm from a workshop for the disabled () Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bunk shop oven / bakery oven Wachtel Piccolo 1-5? Product? Manufacturer: Wachtel? Type: Piccolo 1? Year of manufacture: 03/2013? Condition: used, baker's condition - please clean thoroughly before use? per shelf 1x 60x80 cm sheet metal or 2x 60x40 cm trays? with proofer? Control: DMS 3 Master EM? Electric. Connected load: 25.1 kW? Voltage: 400 V AC/3Ph/N/PE/50 Hz? Floors Dimensions: W.: approx. 80 cm, D.: 66 cm? 1. Floors Height: 20 cm? 2nd - 5th floors Height: 14 cm? Outside Dimensions: W.: 116 cm, D.: approx. 115 cm, H.: 237 cm (with hood)See pictures for details. 

Quail Piccolo 1-5 Floor Store Oven Baker / Bakery? Product? Manufacturer: Wachtel? Type: Piccolo 1-5? Year of manufacture: 08/2011? Condition: used, baker's condition - please clean thoroughly before use? per shelf 1x 60x80 cm sheet metal or 2x 60x40 cm trays? with proofer? Control: DMS 3 Master EM Timer? Electric. Connected load: 26.5 kW? Voltage: 400 V AC/3Ph/N/PE/50 Hz? Floors Dimensions: W.: 60 cm, D.: 85 cm? 1st floor height: 20 cm? 2nd - 5th floors Height: 14 cm? Outside Dimensions: W.: 97 cm, D.: 132 cm, H.: 236 cm (with hood)

Shelf Oven Wachtel PiccoloManufacturer : Wachtel Type : Piccolo I-5Year of construction : 10/2011 Control : DMS 3 Master EM Timer K5 Shelves per floor 1 x 58x78cm trays or 2x 60x40cm trayswith proofer on castors Mobile3N-PE AC 400/50Hz 26,5kWEtagen height : 4x 14cm 1x 20cmExternal dimensions : W: 97cm D: 135cm H: 215cmBaker's condition See picture for details