maschine used for sale

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 20000 kg height of stroke: 130 mm Total height: 327 mm weight: 33 kg dimensions: 250 x 280 x 330 mm Hydraulic machine jack Foot height 26mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

Dispersing system Manufacturer : IKA Maschinenbau Type: DISPAX-REACTOR DR 3-13/4 Capacity: max. 20,000 litres/hour Technical specifications : Disperser for continuous operation. The maximum delivery pressure is 2.5 bar. Motor 18.5 kW, 3,000 rpm Mechanical seal is connected to the water. In the dispersion chamber there are three stators and rotors in the coarse-medium-fine gradation as standard. This combination can be varied as desired, both in order and in the degree of fineness. Documents: available

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

STEIN Maschinenbau Profile Guillotine PT1-200 For glazing beads, small profiles, main profiles and technical profiles Max. cutting width: 190 mm, max. cutting height: 120 mm Extrusion speed: up to max. 10 m/min Blade length: 600 mm Length accuracy: +/- 2 mm Knife stroke: 180 mm Cutting speed infinitely variable Pneumatic quick-change device for knives Hold-down device pneumatic Knives are preheated: 80ºC - 160ºC Cycle time: 1.5 to 4 sec. adjustable on the display Infeed side: unit for applying a protective film to the profile Control: Compact PLC Siemens S7-613C Dimensions: Height: approx. 1,900 mm, extrusion height: 1,100 mm (+/- 50 mm height adjustment) Footprint: approx. 1,450 x 800 mm (without inlet and outlet tunnel) Condition: very good, ready for use

A vertical glass storage cabinet TMB with integrated lighting for inspecting glass sheets is available. Load capacity: 2000kg, machine dimensions X/Y/Z: approx. 6550mm/1250mm/3600mm, weight: approx. 1750kg. The lighting may need to be checked and possibly replaced. An on-site inspection is possible.

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of construction: 1960 Table size: 50 x 70 cm With inking unit: 3 ink application rollers Front marks and side marks Weight: 530 KG Tested and printed Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of manufacture: 1960 Table size: 50 x 70 cm With inking unit: 3 ink ink rollers Front lay marks and side lay mark Weight: 530 KG Checked and test printed

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.

Manufacturer: König Maschinen Gessellschaft m.b.h. Austria Type: KGV Combi 2000 / 40, ( DD ) – RR 800- K5-SA5- SP5-FS-VO-MO (WB) 800-ABI 800 Year of manufacture: 2001 Control panel: Siemens Simatic The plant is controlled by a control panel with visual display Electricity: 3 x 400 V, 50 Hz, 13.5 kW Dimensions: Total length 11 meters The line is intended for the continuous production of weighed dough pieces which are automatically transferred from the main machine. ( Rex Automat ) The machine offers the following functions: - Rex automatic weighing and reception of the kneaded dough pieces. - Proofing in controlled air conditioning - Shaping of dough pieces, e.g. long rolling - Cutting of dough pieces - Flouring of dough pieces - Patterning of dough pieces - Seeding of dough pieces, e.g. sesame seeds, poppy seeds, sunflower seeds, etc. - Transfer of dough pieces to  ...

Mandrel tube bending machine Fabr. LONG Type EL 45 Specifications: for pipe diameters 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s electr. Connection 380 V, 2.2 kW Weight approx. 1000 kg with tools: 16 x R 76 22 x R 76 28 x R 75 35 x R 105

General SKU341U845 LocationBarneveld MakeWagner Maschinen GmbH TypeSE-MAN/SLSV No.SE-2012 Main Features MaterialStainless steel Motor3 KW Inlet diameter780 mm Specified Features - Bag dump station MaterialPTFE (Teflon), Stainless steel 1.4301 (304) Bag dump stations With hoppercheck PTFE coated Hopper sizesDia:780x550mm Inlet690x940mm OutletDia: 200mm With motor3kW, 230/400Volt, 1430rpm With vibro motor0,18 kW Hopper with flexible wallcheck Information Year of construction2007 Mounted on framecheck With switchgearcheck Floorspace3 x 1,95 m CEcheck Total height2,4 m Weight1200 kg Extra SpecificationsIn this dump cabinet, bags can be emptied, and then the empty bags can be thrown to the back of the cabinet, where they are removed by a screw.Endless disposable bag system The cone under the dump cabinet is flexible. There is an air cylinder mounted here to knock  ...

Roll Width: 1.000 mm - Roll Dia. 630 / 800 / 630 mm - With electrical motors

: workpiece length - max.: mm max. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8894 Type: B24-TH300 DX/DW PU Producer: H&H Maschinenbau Created: 2020 Parameters: Weight: 498 kg Equipment: PUVS 280 P melting machine for 20 kg drums of PUR adhesive

As good as new chip conveyor from Bürener Suitable for Emco HT 45 lathe

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

Condition: tested, fully functional Availability: immediately Width approx.: 350 mm Length approx.: 1570 mm

Condition: in working order Availability: immediately Location: Thuringia / Arnstadt approx. table 600 x 400 mm approx. travel distances X / Y / Z: approx. 400 / 320 / 410 mm approx. spindle holder SK 40 Approx. spindle speeds 45 - 2240 rpm approx. drive power 4.9,kw approx. weight 2000 kg

We sell a high performance doming machine Machine for the production of LED and electronic encapsulation, 3D stickers and much more. The doming machine is designed for production with 2K polyurethane or UV doming resin and offers flexible applications, e.g. for the casting of LED light strips, for electronics sealing or doming stickers Condition: very good Our doming system is designed for industrial continuous load: precise axes, volumetric gear metering, and user-friendly software. Whether it's LED potting, electronic coating or 3D stickers, you get a machine that reduces your unit costs while keeping quality consistent. An all-rounder for series production for maximum cycle time and large components. With a height-adjustable, mobile work table, for a flying change in continuous operation without downtime, ideal for wide range of applications. IN A NUTSHELL • Hig ...

Various conveyor belts, different lengths and widths, conveying screws, vibration troughs, washing systems,, NIKO trough for flushing, ABL washing system with conveyer belt,, PEACE submachine for apples,, SOLIA G450 large kitchen slicer,, SOEHNLE belt conveyer scale., Destacking for GN shells,, GMS ILPRA - sieve seal for gastro basins,, GÜNTHER Tauchbad,, BAKON glaze application,, Special filling - system for mushrooms,, LOMA metal detector,, NILFISK High-pressure station,, Rotary drum screen for wastewater treatment, WINKLER CORSAR drum dryer,, MAJA ice cream machine,, DIERKS spiral nut, DIOSNA planetary mixer,, NWU Water Cooler,, KAESER compressor,

width: 3.000 mm height: 1.900 mm length: 800 mm Pneumatic gluing press FEDERHENN MASCHINEN type 99.98 with equipment for the final assembly of grave crosses. The press is modular and mobile and can be converted for different pressing tasks. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press has made 2 686 854 pieces so far, and large factories make well over 10 million pieces with these machines. The maximum theoretical diameter of the piece is 380 mm, production-wise max. 320 - 340 mm finished size. Depth 110mm finished measurement. Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 and 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has decreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks

Press cooling star discharge for material handling of pressed door elements

ITEM NO. AT100FU-EC - Year of construction 2017 - Flow rate 1 000 / 10 000 ltr./h - Speed 900 / 1 429 rpm - Thread DN 40 - 1 year functional warranty

ITEM NO. REFB15-1-CZ - Stainless steel housing - Thread 38Pf - 1 year functional warranty

Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine -with: rail system -12x rails length: 1210 mm -Bevel length: max. 30 mm -max material thickness: 40 mm -with: electronic feed device electronically adjustable -Dimensions box: 1170/780/H510 mm -Weight: 320 kg

Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm -maximum weight allowed: 3 t -Tires: Solid rubber tires 415/100-305 -Overall dimensions: 9135/1860/H1000 mm -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with turntable steering -Platform: 1250/6540/H660 mm -Load capacity: 1.0 t -Tires: Solid rubber 6.00-9 -Number: 3x heavy-duty transport trolleys available Price: per piece -Transport dimensions: 5200/1250/H660 mm -Weight: 420 kg

Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires -Number: 2 heavy-duty transport trolleys available -Price: per piece -Transport dimensions: 11600/2500/H1030 mm -Weight: 3080 kg

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment.

Description Infeed width 650mm The sheet turner enables the turning of flat sheets with a fold pocket in the running direction. This means that the sheets can be printed or labelled on both sides. The import and outfeed transport rollers are segmented, the speed of the inclined roller table and bag infeed can be controlled separately

CNC travelling column milling machine with turntable concept used for machining CFRP components, suitable for machining plastic, CFRP and aluminium. Control Siemens 840D sl. Machine with complete enclosure with loading gate. Milling spindle 15 kW with max. 24000 1/min. 5-axis milling head S2 for aluminium profile machining CFRP and plastic. Tool holder HSK63F. Pick u-Up tool changer for 12 tools. Traversing axes X,Y,Z,A,B,C. Table swivel beam 180° rotatable (A-axis) with zero clamping system arranged on both sides to accommodate the workpiece clamping device. Dimensions table or swivel beam 3200 x 1200 mm. 8 zero-point clamping systems on each side of the table. Chip transport via belt conveyor. Dust extraction via compact dust extractor Tonga BG 32/ST/36ST. Lubrication system Vogel. Workpiece clamping via vacuum. Vacuum generator Schmalz. Very good condition available from June 2026. T ...

Mobile cargo trestle Manufacturer: MSR Maschinen-Stahlbau Reutemann – GmbH Year of Make: 2015 Payload: 8000kg Design: 20,000 load cycles according to EN13155 Load changes performed:

On offer is an electric burger patty forming machine from Gesame Food Maschinery for portioning and forming minced meat/fish/potato or other masses. Technical data: Manufacturer: GESAME Food Machinery Model: MH-100 A Serial No.: 101654 Year of Make: 2020 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. The device has not been tested for functionality and completeness, so a viewing is recommended. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms an ...

Die Fortuna Automat A3 ist eine automatische Teigteil- und Rundwirkmaschine (hauptsächlich für Brötchen), die für handwerkliche und industrielle Bäckereien bestimmt ist. Sie kombiniert das automatische Teilen des Teigblocks in Portionen mit deren Formung zu gleichmäßigen Kugeln, was die Backwarenproduktion erheblich beschleunigt und die Qualität vereinheitlicht.

Rheon, Type Cornucopia KN 400

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Rotary Lobe Blower High Vacuum Blower Unused Manufacturer: Aerzener Maschinenfabrik GmbH Type: GLB 17.14 Year: 1977 Volume flow: 100 m³/min P1: 1.0 atü (bar) P2: 0.5 atm (bar) ΔH: 5 mWS (0.5 bar) at 100 kW and 890 rpm Dimensions approx. 1500 x 1000 x 1100 mm Areas of application: central dust extraction, vacuum coating, packaging industry, chemical processes, steel degassing Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible.

cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°), 82 mm (at 45°) Max. cutting height: 55 ...