maschine used for sale

Axial fan, axial fan, axial fan VEM, MASCHINENFABRIK NEMA LANW 315.4T TGL27476 impeller: Ø 315 mm engine: DM b 102/4-A6T/609 ( DMb102/4-A6T/609 ) 0,06 kW 1400 rpm 220 / 380 V 3AC 50 Hz IP44 approx. 2.4 m connection cable Flange diameter: Ø 465 mm bolt circle diameter: Ø 432 mm hole diameter: Ø 10 mm used, tested ! Dimensions: 470 x 470 x 135 mm

Axial fan, axial fan, axial fan VEM, MASCHINENFABRIK NEMA LANW 355 TGL27476 impeller: Ø 310 mm grid diameter: Ø 400 mm material (impeller): plastic motor: ALM 102/4-A1 ( ALM102/4-A1 ) 0,06 kW 1400 rpm 220 / 380 V 3AC 50 Hz used, checked! Dimensions: 420 x 420 x 150 mm

Axial fan, axial fan, axial fan VEM, MASCHINENFABRIK NEMA LANW 355-6S ( LANW355-6S ) impeller: Ø 355 mm Material ( impeller, housing ): Steel motor: KR 63.1/6 ( KR63.1/6 ) 0,04 kW 900 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested ! Dimensions: 505 x 505 x 230 mm

Centrifugal pump, water pump MD, Maschinenfabrik Dieburg GmbH pump: NOBORI Connections: G3/4 Motor: SEING Type: ASEC 0,37 kW 2830 rpm 230 / 380 V 3AC spare part for EDM machine MD PRONTO 5040 ! used, tested ! Dimensions: 370 x 165 x 195 mm

Motor roller, drive roller, conveyor belt motor, drum motor, electric belt drum BDL MASCHINENBAUGESELLSCHAFT Type 215S Drum diameter: Ø 225 mm Drum length: 750 mm Motor : 2,,2 kW 230 / 400 V 3AC 50 Hz Belt speed: 0.50 m/s Shaft diameter: Ø 40 mm Wavelength: 35 mm used, tested ! Dimensions: 930 x 225 x 225 mm

Screw drive, drive unit ULRICH ANLAGEN- UND MASCHINENBAU GmbH UFS 90-68-6-12 Speed: 674 rpm Pipe inner diameter: 84 / 150 mm Gear motor: SEW R27F DRE100M2/TF/LN 2,2 kW 674 rpm 220 - 242 / 380 - 420 V 3AC 50 Hz IP54 New ! Dimensions: 1100 x 480 x 260 mm

Screw conveyor drive, drive unit ULRICH ANLAGEN- UND MASCHINENBAU GmbH UFS 90-68-6-12 Speed: 139 rpm Pipe inner diameter: 84 / 150 mm Gear motor: SEW R27F DRE90M4/TF 1,1,1 kW 140 rpm 220 - 242 / 380 - 420 V 3AC 50 Hz IP54 New ! Dimensions: 1050 x 480 x 260 mm

Laser Granulometer, Particle Size Analyzer WAB, Willy A. BACHOFEN MASCHINENFABRIK CILAS Type 1064 Particle size: 0,,04 - 500 μm Current consumption: 2 / 1 A Operating voltage: 110 - 120 / 220 - 240 V 1AC 60 / 50 Hz used, tested ! Dimensions: 840 x 580 x 470 mm

Parts washing machine SPORER MASCHINENBAU GmbH TRK 550 SPA Basket diameter: Ø 550 mm Basket height: 140 mm Mesh size: 25 x 25 mm Usable height: 450 mm Load capacity: max. 50 kg Pumps: 1,1,85 kW circulating capacity: 7.2 - 18 m3/h Nominal voltage: 400 V 3AC 50Hz used, checked, cleaned ! Dimensions: 1050 x 1000 x 1550 mm

Radiators, heat exchangers ILKA, MASCHINEN- UND APPARATEBAU Schkeuditz Type A 25x2 Operating pressure: 1,9 Mpa ( 19 bar ) Lights Duct cross-section: 400 x 635 mm Operating temperature: 210 °C Connection diameter ( inside / outside ): Ø 38 / 45 mm Flange ( inside / outside ): 400 x 635 mm / 460 x 695 mm installation length: 150 mm Material: steel, galvanized used, tested ! Dimensions: 380 x 310 x 70 mm

Ceiling air heater, heat exchanger ILKA, MASCHINENFABRIK Nema type P12 TGL 180-1100 Operating pressure: max. 19 kp/cm² ( approx. 19 bar ) Heat exchanger: 410 x 340 x 115 mm Connection diameter ( inside / outside ): Ø 27 / 34 mm without fan Material: Steel, galvanized, painted New ! Dimensions: 500 x 310 x 440 mm

Ceiling air heater, heat exchanger, with fan ILKA, MASCHINENFABRIK Nema type P20 TGL 180-1100 Operating pressure: max. 19 kp/cm² ( approx. 19 bar ) Heat exchanger: 550 x 450 x 190 mm Connection diameter ( inside / outside ): Ø 27 / 34 mm Fan: Impeller: Ø 240 mm Motor: VEM KMO 56 G 6 0,12 kW 870 rpm 220 / 380 V 3AC 50 Hz IP44 Material: Steel, galvanized New, with underlays ! Dimensions: 850 x 460 x 560 mm

Electrostatic surface cleaning DR. ESCHERICH STATIK-AIR 08 width 130 cm with suction KIST MASCHINENBAU ESUC 111-NC 400 V without conveyor belt ! Dimensions: approx. 1300 x 700 x 660 mm used, tested !

turning diameter over bed: 425 mm centre height: 200 mm centre distance: 1500 mm turning diameter over slide rest: 235 mm turning dia. in gap: 470 mm spindle bore: 45 mm camlock: D6 lead of leadscrew: 6 mm tailstock quill taper MT: 4 diameter of quill: 55 mm quill stroke: 160 mm weight of the machine ca.: 1.5 t number of spindle speeds: 36-2240 Digital read-out Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand lever press, mandrel press, mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU type H3 Compressive force: 200 daN ( 2.0 kN ) Projection: 60 mm stroke: max. 55 mm Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm ram diameter: Ø 25 mm, tool holder: Ø 12 mm, length: 12 mm with adapter: Ø 20 mm, length: 32 mm, tool holder: Ø 6 mm base plate (wood): 300 x 200 mm used, tested ! Dimensions ( ready for use ): 300 x 200 x 470 mm

Hand lever press, mandrel press, mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU type H3 Compressive force: 200 daN ( 2.0 kN ) Projection: 60 mm stroke: max. 55 mm Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm ram diameter: Ø 25 mm, tool holder: Ø 12 mm, length: 12 mm with adapter: Ø 20 mm, length: 32 mm, tool holder: Ø 6 mm base plate (steel): 310 x 180 mm used, tested ! Dimensions ( ready for use ): 310 x 180 x 490 mm

Hand lever press, mandrel press, mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU stroke: 70 mm, approx. 4.0 kN Compressive force: approx. 400 daN ( 4.0 kN ) Projection: 100 mm stroke: max. 70 mm Table 1: 153 x 133 mm, bore: Ø 42 mm groove width: 12 / 20 mm, groove depth: 24 mm table 2: 150 x 107 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 68 mm, tool holder: Ø 6 mm ram diameter: Ø 35 mm, tool holder: Ø 15 mm with adapter: Ø 20 mm, length: 8 mm, tool holder: Ø 6 mm used, tested ! Dimensions ( ready for use ): 310 x 155 x 520 mm

Hand lever scissors NOSSENER MASCHINENBAU ScDH 5 Knife length: 210 mm Cutting capacity: sheet metal: 5 mm flat bar: 7 mm Mounting foot: 405 x 125 mm used, tested ! Dimensions: 460 x 125 x 1240 mm

Profile steel shears, hand lever scissors NOSSENER MASCHINENBAU ScDH 10 Knife length: 180 mm Cutting capacity: Sheet metal: 10 mm Flat bar: 50 x 15 mm Round steel: Ø 24 mm Square profile: 22 x 22 mm Angle profile: 60 x 7 mm T profile: 60 x 7 mm Mounting foot: 405 x 240 mm used, tested ! Dimensions: 650 x 290 x 1850 mm

SHW Powerspeed 5 Travel • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axis: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Swivel range milling head mount: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Conveyor • Feed length: 10,000 mm Coolant device • Container capacity: 1,200 litres About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Performances: -Mach ...

Overview The chamber pasteurizer has 2 chambers and was manufactured in 2007 by German company JS Maschinen GbR. It pasteurizes by spraying hot water on the product. Techn. Data Capacity by rack: 1200 bottles of 33cl longneck 1450 bottles of 25cl 800 bottles of 75cl classic Each pasteurization chamber is equipped with 4 water spray bars with nozzles Each pasteurization chamber is equipped with a water tank (under and behind the chamber), a pump and a resistor Cycle time: approx.. 2h, depending on the temperatures of the chosen program Outlet temperature is 40°C Heaters from 2014 Probs from 2023 Pump garniture from 2022 Weight: 1200 kg Spare parts available

Hommel Rotormat 1000 Residual Bread Shredder ? Product? Manufacturer: Hommel Maschinen- und Apparatebau? Type: Rotormat 1000Universal - Chopper, for grinding fresh or dry leftover bread, breadcrumbs, fruits, nuts, cheese rows.The chopper is equipped with 3 kW motor.The machine is offered 2 sieve inserts additional sieve inserts can be purchased separately.-Crushing bread-380 volt / 50 Hz motor 3 kW stainless steel cladding-146 / 65 / 90 cm (H/W/D)Dimensions (H x W x D) For details see pictures.

Crane Container Sirch 14.5 m³ Doors Locking dimension 3640 mm Length 6.31 m Weight 2040 kg Crane erection Ostler Maschinenbau Weight 1300 kg BJ 6 /13 Max. Reach horizontal 8,50 m 2 x Telescope Hydr. 2 drawer supports extendable Gripper 60 cm with rotator

Bread slicer Treif Sirius + Year: 2020 - Bread slicer table machine - Manufacturer: Treif Maschinenbau GmbH - Model Sirius plus - Cutting width adjustable from 4mm to 14mm - halve function - Year of construction: 2020 - 400 V, 3-N-PE, 50 Hz - Weight 120 kg Dimensions approx.: 80x70x57cm WxDxH

Manufacturer: Lang Maschinenbau GmbH & Co. KG Type: EL-HY168 F CNC PLC: Siemens Simatic S7 Control system NCU: Siemens 840D CNC control: MMI Multicontrol 2000 Dimensions and weight: Net weight: 33t max. tube Ø: 168.3mm max. bending radius Rm: 700mm min. bending radius Ri: 80mm Pipe extension length: 6000mm max. bending angle: 190° max. torque of resistance at St35W: 201cm3 electr. Connected load: 400V/50Hz Full load current: 85A

36 Füllventile; Laufrichtung: links-rechts. Maschinenmaße: L 3.200 x B 2.500 x H 2.700. Gewicht: 5.000 kg. Füllstellen: 36 Laufrichtung: links-rechts Gewicht in kg: 5000 Maße L x B x H [m]: 3200x2500x2700 More then 300 machines new and second hand on our seema .de

Bed milling machine Manufacturer: SHW Werkzeugmaschinen Type: UF 5 Travel • X-axis: 2,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Heidenhain TNC 155 B Automatic swivel head (Switch between horizontal and vertical editing) Quill 120mm Milling spindle holder SK 50 Speed 2,500 rpm Mill table • Clamping area: 1500 x 800 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Performances: -Machines Ilbgjd8lvl -Spares -Customer service - Machine service - Machine overhauls - Control modernization _____ Second-hand machin ...

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Homag, Type: Profi BAZ/20/40/14/3/KA, Year: 2003, Control: Woodwop, Maschinensteuerung: Homag, Programming station office: möglich, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5200, Min.-max. workpiece height in mm: 10-60, C axis: yes, Number of milling spindles vertical: 2, Anzahl Frässpindeln horizontal: no, Milling engine 1 hours power: ca.12, U/min 1) Vertikal: 1500-24000, Milling engine 2 hours power: ca.12, U/min 2) Vertikal: 1500-24000, Number of tool changers: 2 (1 defekt), Tellerwechseler: yes, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: Rollentransport, Traverse table: yes, Stops in the table front: yes, Automatische Beladung: yes, Automatschische Entladung : yes, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63, Saw unit: yes, Radial arm machine: yes, Laser positioning: no, incl. to ...

Manufacturer: Heesemann Motor Querschleiffaggregat ATB Loher, Type: AF 160 L/4/2F-21, Maschinennummer: 3716729-20, From machine: Heesemann Schleifmaschine, Volt: 400, cos: 0.90/0.95, IP: 54, Power kW: 13/17, Volt/Hz: 400, pm: 1470/2945,

Manufacturer: SEW-Motor mit Antriebsriemen, Type: K 37 DT 80, Motor with gear: yes, Maschinennummer: 50.01013736.01.0001.02.03, Power kW: 0,75, Motor with gear: yes, Speed rpm: 2700/303.0,

Manufacturer: Homag KF 20, FREITEXT1: Kompletter Maschinentänder, FREITEXT2: rechte Seite mit, FREITEXT3: HL04/Vorfräsen/FK03 und Verstellbett,

Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working widht max mm: yes, Max. working depth in mm: inkl Werkzeuge und Zubehör, Year :1999

Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,

Manufacturer: Biesse Rover A Nesting, Type: Rover A Nesting, Year: 2020, Control: Biesse, Working range X: 3140, Working range Y-axis: 1580, Working range Z: 230, C axis: yes, Number of milling spindles: 1, Number of milling spindles vertical: 1, Milling engine 1 hours power: 12, rpm 1): 1800-2400, Number of tool changers: 1, Tellerwechseler: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Saw unit: yes, Portal machine: yes, Werkstückspannsystem: Vakuum, machine ready for demonstration: yes, Automatic setting up table: yes, Charging system single-sided: Hubtisch, FREE TEXT: Entladeband + zusätzlicher Werkstückreinigung/genaue Maschinentechnik kommt noch, Year :2020

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben<CRLF>1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging:  ...

Manufacturer: Homag Getriebe Verstellung Oberdruck/Maschinenhalter Bett, Type: auf KF Homag, FREETEXT1: 3 Verstellgetriebe, FREETEXT2: 4 Winkelhalter Bett,

Manufacturer: Indramat Motor Y-Achs Antrieb Weeke/Homag<CRLF>, Type: MDD071B-N-040-N2S-095GA0/7P010-MF1-10-040-000, Maschinennummer: MDD071-17390, Motor torque Nm: 4.40/6.60, IdN A: 11.00/16.60, pm: 4000/6000,

Manufacturer: Siemens, Type: Bürstenloser Sevomotor, Year: 2000, Motor with gear: yes, Gear: TP 010-MX1-10-051-000, Maschinennummer: 1FK6063-6AF71-1AG0, From machine: IMA BIMA 410, Volt: 270, Ampere 1: 8,3, IP: 64, Motor torque Nm: 11.0/6.0, pm: 3000/3900, Motor with gear: yes, Gear: TP 010-MX1-10-051-000, Flange motor design: yes, Year :2000

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: Biesse , Type: Insider FT 2, Year: 2001, Control: Biesse NC 100, Software: Biesseworks, Maschinensteuerung: CNI, Online connection: möglich, Machining stations: 2, Working range X: 3500, Working range Y-axis: 1300, Working range Z: 60, Vertical drilling station from above: 2, Automatic setting up: yes, Drilling supprt from bottom: 4, Milling spindles vertical: 2, Power kW 2: ca.5,5, RPM min-max 2: 24000, Horizontal drills-X: 24, Drill horizontal Y: 8, Continuous flow system: yes, Lochraster: 32, Working range max mm: 60, Machining stations: 2, Year :2001

Manufacturer: Siemens, Type: Synchron-Servomotor 1FK6, Year: 2000, Motor with gear: no, Maschinennummer: MO99 5712 01 003, From machine: IMA BIMA 410, Volt: 270, Ampere 1: 4,5, IP: 64, Motor torque Nm: 6.0/4.0, pm: 3000/3900, Series: 1FK6060-6AF71-1TB0, Motor with gear: no, with motor brake: Ja, FREE TEXT: Brake 24 V/ 15,6 W , 6-poliger Motor, 100K, 3000 1/min selbstgekühlt, IM B5 (V1, V3) Leistungs-/Signalstecker Stecker 270 Grad drehbar, Year :2000

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Sergiani-Bürkle-Holtkamp, Type: Herstellung Türrohlinge, Year: 2008, Herstellung von: Herstellung Türrohlinge, Maschinensteuerung: Übegordnet, Work piece width min-max mm: 1200 X 2200, Min.-max. workpiece height in mm: 35-60, Machine type1: Beschickugsanlage Sytematic, Manufacturer2: Bürstenalage Bürkle, Machine type2: Scheibenrollenbahn Bürkle, Manufacturer3: Scheibenrollenbahn Bürkle, Manufacturer4: 4 Walzenleimaufttragsmaschine Bürkle, Machine type5: DAK 1300, Manufacturer6: Sytematic, Machine type6: Belegestation , Manufacturer7: Sytematic, Machine type7: Aufgabestation Rahmen und Füllung, Manufacturer8: Sytematic, Machine type8: Winkelübergabe, Hersteller9: Sergiani, Maschinentyp9: 10 Etagenpresse, Hersteller10: Aulauftransport Sergiani, Year :2008

Manufacturer: Weinig Ferigungsanlage, Control: Weinig, Software: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programming station office: yes, Manufacturer1: Weiniig Profimat, Machine type1: Profimat 23, Year of manufacture1: 1999, FREETEXT1: 5 Spindeln, Manufacturer2: Weinig , Machine type2: Unicontrol 10-5, Year of manufacture2: 1999, Manufacturer3: Weinig Transportsytem, Manufacturer4: Weinig, Machine type4: Unitec 10, Year of manufacture4: 1999, Manufacturer5: Stähle Schleifmaschine,

Manufacturer: Ima Zerspaneraggregat Links, FREETEXT1: Maschinenständer, FREETEXT2: Doppelzerspaner, FREETEXT3: Kw Leistung 3-4,4 U/min 2880/5880/50-100 HZ, FREETEXT4: 2 Motoren Zespanen, FREETEXT5: 1 Motor schwenkbar/steuerbar, FREETEXT6: Motorische Verstellung,

Manufacturer: Homag KF, Year: 1996, FREITEXT1: Asrichtlineal rechts, FREITEXT2: gesteuert, FREITEXT3: 8 Positionen verstellbar, FREITEXT4: länge 1400, FREITEXT5: mit Halter Maschinebett, Year :1996

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...

Manufacturer: Biesse , Type: Rover 24, Year: 2002, Software: Compass kann mit gekauft werden, B-axis: 100/50/20, Maschinensteuerung: 6170, Programming station office: 1380, Work piece width min-max mm: 150, Min.-max. workpiece length in mm: yes, Aluminium processing: 1, Throuh running machine: HSK F-63, Feeding speed max m/min: 7.5, Pendulum processing: 1800-24000, Number of milling spindles vertical: 1, Tool adaption system: 24, Milling engine 1 hours power: 8, rpm 1): 7, Milling engine 2 hours power: 4, rpm 2): 2, Working widht max mm: 2, Vertical drills-X: 10, Drill vertical Y: yes, Horizontal drills-X: yes, Drill horizontal Y: 100, Aluminium sleeking table: yes, 4 station allocation: yes, Rigging support table: yes, Edgeband hight mm: yes, Radial arm machine: 1 Winkelgetriebe, machine ready for demonstration: Deckenlaser und Hubschwingen, Year :2002

Manufacturer: Homag, Type: FL 62/25, Year: 1988, Maschinensteuerung: Homag, Min.-max. workpiece length in mm: 250-1500, Min.-max. workpiece height in mm: 3-80, Cam distance mm: 900, Feeding speed min-max m/min: 5-40, Feed stepless: yes, Min-max protrusion of workpiece mm: 30, verängerte Kette mm: 900, Nockenaushebung: no, gesteuerte Fräsaggregate: 2, Scoring saw controlled: yes, 1st milling unit kW / rpm: 4,5/5890, 2nd milling unit kW / rpm: 4,5/5890, Year :1988