mas tos used for sale

diameter range 6 mm shaft length under head 25 mm output pieces/min 100

Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine -with: rail system -12x rails length: 1210 mm -Bevel length: max. 30 mm -max material thickness: 40 mm -with: electronic feed device electronically adjustable -Dimensions box: 1170/780/H510 mm -Weight: 320 kg

Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Tires, solid rubber tires, forklift tires, complete wheels -Handover: in its current condition as inspected -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic, 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Sale: complete -Dimensions each: Ø 570 x 160 mm -Weight: 96 kg

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm -maximum weight allowed: 3 t -Tires: Solid rubber tires 415/100-305 -Overall dimensions: 9135/1860/H1000 mm -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg

Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with turntable steering -Platform: 1250/6540/H660 mm -Load capacity: 1.0 t -Tires: Solid rubber 6.00-9 -Number: 3x heavy-duty transport trolleys available Price: per piece -Transport dimensions: 5200/1250/H660 mm -Weight: 420 kg

Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires -Number: 2 heavy-duty transport trolleys available -Price: per piece -Transport dimensions: 11600/2500/H1030 mm -Weight: 3080 kg

max. workpiece length: 4400 mm profile spindle: 1 Stück main drive: 19,2 kW Control: Beckhoff CNC machining center MASTERWOOD 4 WIN --------------------------------------------------------- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Different tool magazines for optimal tool loading - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of the workpieces - CNC controlled work table with automatic positioning of beams and Stretcher - Automatic re-clamping for changing between external and internal profiling - INTEGRATED window construction software, i.e. the machine does not have to (but can of course) can be controlled from the office with external industry software. - strong motor with 19.2 kW HSK-63 E Please note that this stock machine is with us in Oberkochen and is already equipped with many useful  ...

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment.

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Technical data: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Sealing machine Dimensions de la clutch : 650 x 450 x 170 mm Sealing length : 650 mm Speed : 0 - 12 m/min Sealing temperature : 0 - 250 °C

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

Eppendorf Mastercycler Ep Gradient s Realplex 2 Thermal Cycler Thermal cycler model 5345 + 6300 EPgradient S Weight: 20 kg Voltage: 220V Dimensions 60×30×50 cm Without software

Masterwood K29S Multi-Spindle Drilling Machine Number of spindles 29 Rpm 2800 rpm Distance between first and last drill bit 896 mm Number of pneumatic clamps 4 Distance between the centers of the individual spindles 32 mm Max drilling depth 80 mm Operating pressure 6 – 7 bar Motor power 3kW Technical documentation

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

0: 0,4 - 3 mm Workingpiece thickness from to: 9 - 60 mm Total length: - mm Feed speed: stufenlos 8 - 12 m/min. total power requirement: 15 kw Dimensions (L/W/H): 4.290 x 840 x 1.690 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used separator/muscle demusing machine from Meat Master type M18 / P-100-S. Year of manufacture 1999. Manufacturer's documentation. CE

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable; 1. Brush: Scotch Brite Medium / Diameter 220mm, Vario drive; 2. Brush : Scotch Brite Hard / Diameter 220mm, Vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely adjustable); Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

working width: 800 mm; working height: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Units seperatly adjustable; 1. brush: Metalbrush diameter 220mm; 2. brush: Tynexbrush, grit 80, diameter 220mm; height adjustment: manual; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 5,5 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1500mm; waight: 950kg;

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable ; Brush removal height: 25 mm with pneumatic damping; 1. Brush: Metal brush diameter 220mm; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Right - Counterclockwise: for both brushes; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

Working width: 380 mm; Working height: 150 mm; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 210mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Key data: 1000 mm, 400 mm

Compact, used coil rack for efficient processing of small coils on confined space. Thanks to its mobile design, the system is easy to manoeuvre and use them flexibly. The assembly is done from above, while the material is can be quickly brought to the desired working height. Split rollers in the nacelles allow different cuts in one unit and ensure maximum flexibility. The operation is simple, ergonomic and low-maintenance – ideal for daily use. Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Coil width (min.): 1000 mm Coil outer diameter (max.): approx. 400 mm Dimensions: 1400 x 1450 x 1400 mm Colour: red Load capacity: 1000 kg Number of gondolas: 5

Eppendorf Mastercycler 5332 Personal PCR Thermal Cycler Temperature range: 4°C - 99°C Temperature distribution: 95°C ± 1.0°C Temperature accuracy: ± 0.2°C Sample capacity: 25 x 0.2 mL tubes or 16 x 0.5 mL tubes

Cole-Parmer Masterflex I/P 77410-05 BDC drive standard peristaltic pump, 77600-62 head Pump rotation speed: 65 to 650 RPM With 77600-62 high-performance pumphead with thermoset polyester housing, stainless steel Flow rate: 0.01 to 19 l/min. Tubing Type: I/P 70, I/P 88, I/P 89 Equipment tested

Display gluer- Lunex, Uni-Gluer U-1600, Year 2003, Nordson Gluesystem with 3x Guns

CNC travelling column milling machine with turntable concept used for machining CFRP components, suitable for machining plastic, CFRP and aluminium. Control Siemens 840D sl. Machine with complete enclosure with loading gate. Milling spindle 15 kW with max. 24000 1/min. 5-axis milling head S2 for aluminium profile machining CFRP and plastic. Tool holder HSK63F. Pick u-Up tool changer for 12 tools. Traversing axes X,Y,Z,A,B,C. Table swivel beam 180° rotatable (A-axis) with zero clamping system arranged on both sides to accommodate the workpiece clamping device. Dimensions table or swivel beam 3200 x 1200 mm. 8 zero-point clamping systems on each side of the table. Chip transport via belt conveyor. Dust extraction via compact dust extractor Tonga BG 32/ST/36ST. Lubrication system Vogel. Workpiece clamping via vacuum. Vacuum generator Schmalz. Very good condition available from June 2026. T ...

Capacity: 360 Bo/h, Filling points: 6 pieces, Voltage: 230 V, Compressed air: min. 6 bar, Length: 1590 mm, Width: 700 mm, Height: 1875 mm, Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L, Base construction: steel rack, Features: including add-on parts, filling programm modifiable

Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

Palletization including pallet loader and unloader, pallet magazine, banding machine, pallet labeling, Capacity: 150 Pallet/h, Features: Pallet loader and unloader: Nagema PA; Year of construction: 1993; Capacity: 1700 crates/h; Dimensions: Length: 3 m, width: 2 m, height: 3 m Weight: 1.6 tons Banding machine: Athena Roboband 2VH; Year of construction: 2004; Capacity: 150 pallets/h; Pallet dimensions: 1.2 m x 0.8 m; Logopac Logomatic 915/T; Year of construction: 2014; Capacity: 150 pallets/h

Crate washer for longitudinal plastic crates with 3 cleaning levels on top of each other and dirt discharge with collection vessel. 1st level: Soaking basin with pump suction channels. 2nd level: Main spraying with upward turner and conveyor. 3rd level: Final spraying with upward turner and conveyor with water collection pool., Additional title: 2500 crates per hour, Capacity: 2500 crates/h, Volume of soaking bath: 2 m3, Power: 24,6 kW, Voltage: 380 V, Frequency: 50 Hz, Length: 6,5 m, Width: 1,4 m, Height: 3,0 m, Weight: 4300 kg, Formats: NRW crates (400x300x290 mm), NRW handy crates (400x300x300 mm), Pinolen crates (395x300x270 mm), Running direction: crates longitudinal, Material: stainless steel cladding, Base construction: standing on 4 feet, Features: 2 x crate turner, soaking basin, main spray jets, second spray jets, dirt expulsion with collection vessel, caustic dosing system

Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 80 hl/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohno ...

SALDATRICE PER SHOPPER T-SHIRT E GUANTI MONOUSO LARGHEZZA MAX. LAVORABILE 1320MM N. PISTE 3 ALTEZZA PILA MAX. 7,5 MM PRODUZIONE T-SHIRT: LUNGHEZZA SACCO 380 - 700 MM POSSIBILE PROFONDITA SACCO 170 - 410 MM ALTEZZA PILA MAX. 7,5 MM VELOCITA LINEA 255 CPM MAX. 160 M/MIN PRODUZIONE GUANTO MONOUSO LARGHEZZA FILM SALDABILE HDPE 10 - 25 MICRON

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor

Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks., Additional title: vertical, conical stainless steel tanks, Capacity: 3000 l/tank, Width: 1,55 m, Height: 3 m, Weight: 600 kg, Material: V4A stainless steel, Position: vertical, standing on feet, Base construction: cylindrical tanks with dished top and conical bottom, Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Technical Specifications & Performance Data The MAS PACK Accupack 3/6 is a robust, second hand case packer engineered for high-throughput industrial packaging in beverage production. Built in 2004 and maintained in storage, this unit is designed to collate and load bottles into cartons with steady precision and adaptable formats suitable for a used bottling line. Manufacturer / Model: MAS PACK Accupack 3/6 Year of manufacture: 2004 Application: Automatic case packing of bottles for industrial packaging lines Nominal speed: up to 13,000 bottles per hour (format dependent) Pick-and-place system: Mechanical, cam-driven head unit with adjustable bottle gripping No. of heads: 3 Pack configurations: cases of 6 and 12 bottles; multi-case handling per cycle (up to 6x6 or 3x12, application dependent) Format range: up to 10 carton centering formats included Container types: PET and glass bottles;  ...

Used Case Packer MAS PACK Accupack 3/6 year 2005 The Used Case Packer MAS PACK Accupack 3/6 year 2005 packs bottles into cases with precision and efficiency. Moreover, MAS PACK manufactured this model in 2005 to meet the needs of high-capacity bottling lines. Consequently, it delivers reliability and flexibility, making it an excellent choice for companies that prioritize speed and accuracy. Technical Specifications and Operational Capacity The Case Packer MAS PACK Accupack 3/6 processes up to 12,000 bottles per hour. Furthermore, it handles glass containers efficiently and accommodates formats of 0.375 liters, 0.75 liters, and 1.5 liters. In addition, the machine’s fixed head and left-side operator setup improve access and streamline operations, enabling smooth packaging processes. Working Configurations of the Case Packer MAS PACK This case packer supports two main configurations. ...

Technical Specifications & Performance Data The Used case packer Mas Pack Accupack 3/6 – 13000 bph is a robust, second hand solution for high-speed industrial packaging in beverage production. Built by MAS PACK in 2004, this Accupack 3/6 Major combines mechanical precision with adjustable handling to place bottles or cans into corrugated cases with speed and repeatability. It is well suited to integrate within a used bottling line alongside filling, rinsing, capping and labeling equipment. Manufacturer / Model: MAS PACK Accupack 3/6 Major Category: Case Packer (pick-and-place) Year of manufacture: 2004 Rated speed: up to 13,000 bottles per hour (format-dependent) Gripper system: 36-head bottle pick-and-place assembly with adjustable grippers Packaging patterns: multi-pattern capability (e.g., configurations such as 3x6, 6x4, 12-bottle arrays subject to tooling) Container types: PET, ...

Used labeling machine PE Master M for adhesive labels 6000 bph Technical overview of the model PE Labelers built the used labeling machine PE Master M for adhesive labels 6000 bph in 2005 to serve medium-capacity bottling lines. Specifically, the machine handles 0.75-liter bottles and processes up to 6000 bottles per hour. As a result, it provides an optimal solution for operations requiring consistent output. Mechanical configuration and operation The manufacturer equipped the PE Master M with six rotating plates that move bottles along a clockwise carousel. Additionally, three labeling stations apply adhesive labels precisely to the front, back, and neck of each container, thereby ensuring full coverage of all critical areas. In comparison to older models, this configuration offers improved label positioning. Self-adhesive labeling method The used labeling machine PE Master M for adhes ...

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...