134,910 used machines on RESALE, but how to find them? Machine Search
Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.
Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm
GE Revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 1 x detector 41cm 41cm separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.
Vibrator 4 tubs WALTHER TA.4/72 Internal tub dimensions: L 800 x W 250 x H 300 mm Coating Tubs No 2/3/4: in good condition Coating Tub No 1: used Motor 7,4 kW New electrical panel: starting by electronic variator Concrete base 2 exits at the front Voltage 380 V Dimensions (L x W x H) 2500 x 2100 x 1200 mm Weight approx. 3 T MACHINE IN OUR STOCK IN FRANCE.
HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...
Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available
Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm
1 Clamp Perfect Binder For Hotmelt Adhesive, Glue Vapor Extraction, Flaps And Creasing Tools, Envelope Double Sheet Control, Touch Screen With Simple Setting Via Icons, Preheating Timer, For Spine And Side Gluing, Copy Counter, Error Analysis, etc., Pneumatic Opening And Closing Pliers, Automatic Adjustment Of Nipper Opening According To Block Thickness, Side Gluing Disc According To Block Thickness, Back Creasing According To Block Thickness, Creasing Depth, Positioning Of The Rear Envelope Guide Rail According To The Envelope Width, Adjustable Milling Depth 0-3mm, Backworking Station With A Combination Tool With Dust Cutters, Height Adjustable Notching Knife And Ring Brush, Hotmelt Adhesive Basin With Two Application Rollers And Glue Squeegee And Integrated Side Gluing Unit With Slanted Discs (Production Possible Without Side Glue), Cover feeder with integrated double creasing unit (de ...
CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock
MAZAK laser cutting system NTX510 1, 5kW Year of construction: 2000 very well preserved, fully reconditioned MAZAK laser machines with 1500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7 m Small part conveyor completely encapsulated engine cover FE: up to 12 mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction system incl. commissioning + training = optional with automatic loading and unloading.
PFM SWIFT packaging machine manufactured in 1995, performs the automatic process of packaging various types of products in foil packaging. The reliable and very easy-to-use machine takes the film from a reel above the working area, that is then accurately measured, appropriately cut and cold or hot sealed. At the very end of the process, a special device punches a EUROSLOT hole in the packaging. The packaging machine tooling does not need to be changed when changing the dimensions of the packs. The SWIFT packaging machine weighs 380 kg. Technical data of the PFM SWIFT packaging machine - packing material type: single or multilayer thermo-weldable materials (propylene cellulose film, coextruded film etc.) or PVC - sealing type: elongated profile, spacing 2x 90° - capacity: 60 packs/min - device for making EUROSLOT holes - unloading conveyor - power: 3.2 kW - power supply: 380 V ...
COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...
used
Handtmann VF 616 + PLH 216 hanging line Z-Version”, consisting of vacuum filling machine Handtmann VF 616, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, including Handtmann hanging line PLH 216 with casing holding device 216, and hanging unit 241-16 and 216-22, all machines will be refurbished after confirmation of order.
Key data: 500 mm, 700 mm, 3500 1/min
Make: Spinner Model : TC 110 SMCY Control Siemens 840 D ShopTurn Year of construction 2006 Specifications: Turning diameter 500 mm Circulation diameter 690 mm Turning length 900 mm Y-axis -55/+65 mmmm C-axis 0.001° Spindle passage main spindle 110 mm Spindle passage counter spindle 66 mm Main spindle motor 28 kw High-speed main spindle 3200 rpm. Counter spindle speed 5000 rpm. Rapid traverse x/y/z 24 m/min. Sauter Star Revolver VDI 50 Number of stations 12-fold Driven tools 12 Speed driven tools 4000 rpm. Machine weight approx. 7800 kg Dimensions set-up (L x W x H) with chip conveyor 5500 x 2200 x 1800 mm Accessories: automatic pick-up device Measuring arm Bar feeder preparation Conveyor 3D Renishaw Probe Coolant gun Increased coolant pump Hainbuch Collet Chuck for Main Spindle 3 Jaw chuck counter spindle Various tool holders Documentation
Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor ...
EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50
I am selling a Combined Machine Sliding Table Saw with Scoring + Milling Machine Manufacturer: FELDER Austria Model: KF700S. Built in 2011. Cutting length 3200mm. Saw blade and milling swivel 0-45° manual Saw blade and milling digital height adjustment Digital display of rip fence and working heights Insertion of the main saw blade and scoring machine from the aluminium format table. Main motor sliding table saw 3.0 KW / (3200/4500/5800 rpm adjustable) Scoring motor sliding table saw 0.75 KW Main motor milling machine 5.5 kW Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.
MULTI MOULDER machine type WEINIG PFA 17N second hand machine 6 spindles with tools - Composition : 1° shaft : surface planer . motor power Hp 5,5 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 5,5 4° shaft : spindle moulder . motor power Hp 5,5 5° shaft : thickness planer . motor power Hp 5,5 6° shaft : surface planer. motor power Hp 5,5 inlet length mm. 2000 feed speed: from 7,8 to 58,8 mt./min max. useful working width mm. 170 max. useful working height mm. 120 lubrication system weight kgs. 2600 volt. 380/50
METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...
Used spiral mixer DIOSNA, type: SP 120 D - complete Ã?berholt- -for 120 kg of dough and 75 kg of flour -Spiral made of stainless steel -Boiler in stainless steel -2 time clocks -2 speeds -1 reverse Emergency stop switch -Condition: Very good Including delivery within Germany. The spiral mixer was reconditioned refurbished and is located in a very good condition. Inspection and testing according to arrangement.
1-Clamp Automated Perfect Binder, Format: Sheet Size: Max. 320x320mm, Min. 148x105, Format: Cover Size: Max. 660x320mm, Min. 230x135mm, Book Thickness: 1 to 50mm, Cover Weight Range: 80-300 g/m², Cover Pile Height: Max. 70mm, Max. Production Speed: 500 Cycles/Hour (About 300-400 Books/Hour), Color Touchscreen Control Display Panel, 200 Memories For Repeat Orders Saveable Jobs, Double And Miss Detection, 1 Carriage Clamp Automatically Adjusted To The Input Book Thickness, Automatic Book Thickness Caliper, Milling And Roughening Station, Adjustable Milling Depth From 0mm To 3mm, Glue Tank With Dual Application Rollers And Side Gluing Roller (Adjustable Amount Of Glue And Glue Lenght Through The Color Touchscreen, Spine Gluing, Side Gluing, Nipping Station, Suction Drum Cover Feeder, 4x Cover Scoring/Creasing, PUR Gluing System SM Klebetechnik, Type: AN 533604, AGE: 2009, Serial No. 090838 ...
MAZAK laser cutting system STX510 MKII 2, 5kW very well preserved, fully reconditioned MAZAK laser machines with 2500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7, 3 m Small part conveyor Ball roller table completely encapsulated engine cover casting bed, no foundation necessary FE: up to 20mm VA: up to 10mm ALMG: up to 8mm Plastic can including CAD / CAM software 2018 version including warranty incl. commissioning + training To test power ready to delivery ready to use = optional with automatic loading and unloading MAZAK CELL =.
Tube filling and closing machine for metall tubes. Machine comes in line with IWKA-cartoning machine, type Cartonpac CPS-R.
Collette SM200 high speed bowl mixers 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls
Dimensions and weights Length approx. 2200 mm Width/depth approx. 1330 mm Height approx. 1300 mm Weight approx. 362 kg Dressing Dressing table width 260 mm Dressing table length 1120 mm Chip removal max. 4 mm Suction connection Extraction nozzle diameter milling machine 100 mm Suction nozzle diameter saw blade guard 30 mm Suction nozzle diameter thickness 100 mm Thickness Table length 545 mm Table width 258 mm Working height min. 5 mm Working height max. 225 mm Chip removal max. 4 mm Electrical Data Saw input power 2.2 kW Input power planer 2.2 kW Input power table milling machine 1.5 kW Connection voltage 230 V Mains frequency 50 Hz Milling spindle Mandrel diameter 30 mm Effective length 105 mm Height adjustment 110 mm Speed(s) 1400/4000/6000/9000 rpm(s) Milling tool diameter max. non-lowerable 160 mm Noise emission Sound pressure level no-load 80 dB(A) ...
Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary ...
Working width: 3000 mm sheet thickness: 15 mm sheet thickness in bending: 10 mm top rollers Ã?: 320 mm bottom rollers diameter: 310 mm speed: approx. 5.5 m / min. Connection: 380V kW weight: 17000 kg space requirement: 5450 x 2100 x 2450 mm
HF FeinfräÃ? & - grinding spindle, manufacturer Fischer Schaffhausen. Designation; MFVS 830, Series number: EL-S-007 The spindle is undamaged, unused and in their original packaging. The spindle can be used with electrodes and-precision Strausak type. 82 CNC. or as RF - internal grinding spindle. Tech. Data.: 220 V 600 HZ 4-pin 2.5 KVA 1.4 KW / 600 HZ for further information: The grinding technology: Tool &-profile grinding coarser has in 2001 of the production & - Strausak license rights wage purchased. The rights include the complete series 57 U/W, 57 U CNC, 57 W CNC 3.-4.u-5-axis, and from this all developed machines.
Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.
Machine type: CNC centerless grinding machine Make/Model: MIKROSA KRONOS M SPECS CNC Fanuc 21iM grinding wheel max sizes: 250mm wide x 610mm diameter 2 controlled axis on grinding wheel dressing (interpolated) 1 axis on regulating wheel 1 axis on plunge axis (workpiece diameter) Throughfeed grinding: yes Plunge grinding: yes can be inspected under power in our warehouse in Gussago BS (Italy)
GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1997. The machine, designed for precision machining of workpieces with a maximum diameter of 500 mm, has two spindles (main spindle and sub-spindle) of high speed and power, which will improve even the most intensive machining. The installed GRUNDING CNC controller with colour screen and control panel also allows for cycles to control. The total weight of the machine is approximately 3000 kg. Technical specifications of the GILDEMEISTER NEF Plus 500 lathe - CNC control: GRUNDIG - maximum turning diameter (over bed): 500 mm - maximum turning diameter (over saddle): 290 mm - maximum turning length: 1500 mm - main spindle rotational speed range: 80-2800 rpm - main spindle passage: 70 mm - main spindle drive power: 11 kW - maximum sub-spindle rotational speed: 5000 rpm - sub-spindle drive power: 7.5 kW - total power require ...
Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt (indirect) The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing new modulated Weishaupt burner (other makes by request) new paint (powder coating) Inspection of the roaster is possible at any time Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 ...
Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Probat - direct The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating) Inspection of the roaster is possible at any time. Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 will look like.
Fiber laser machine HLF Power: 4kW Sheet size: 3000 x 1500 mm Changing table Siemens touch screen controller with LAN/USB Siemens drives Precitec auto focus Pro cutter cutting head IPG resonator with 4kW is included: Warranty CAD CAM software Commissioning DTL delivery Training offered
Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69
Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.
Roll forming system with 2 stations + prepare station for U-profile
2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling
Carrot processing machines for black carrots etc. till storage bunkers Pos. 1.42 /max. 20 t/h / 2017 Carrot unloading station Pos. 2.43 Dry soil remover Pos. 3.44 Weed and gras remover Pos. 4.45 Cyclone stone separator Pos. 5.46 Water bath with conveyor to Pos. 6.47 Pos. 6.47 Washing machine with conveyor to Pos. 7.48 Pos. 7.48 Sorting conveyor belt with rejection conveyor belt for rejected vegetables Pos. 8.50 Conveyors with scales till Pos. 9.51 Pos. 9.51 2 x storage bunker, capacity: 2 x 25 tons, (with conveyors to Pos. 52) Further machines for the production of carrot juice concentrate are available used, sold as it is, where it is, price ex location
Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...
oscillating belt sanding machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : Worktop mm.280 x 1000 Tiltable worktop mm.300 x 950 Sanding belt development mm.150 x 2580 Driven roller diam. mm.75 Additional worktop mm.300 x 300 Abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 Motor for oscillation Hp 0.5 Oscillating stroke mm.20 Overall dimensions cm.182x105 H=cm. 150 volt. 380/50 Machine weight kg.400
AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper
Automatic Edge Banding machine type OCMAC BS 21 . second hand composition : - glue pot - edge-trimming unit (2 motors) Kw 2 each one . rpm 12.000 with cabinet with HF converter Hp 5 volt. 380/50
Key data: 500 mm, 450 mm, 6000 1/min
1 used CNC lathe Make Gildemeister Model CTX 320 V5 Linear Year of manufacture 2004 Control Siemens 840 D ( ShopTurn ) Workspace: Max. circulation diameter over bed 500 mm Circumferential diameter via X-carriage 300 mm Turning length 450 mm Bar passage 60 mm Chuck diameter 170 mm Chuck diameter sub-spindle 165 mm Plane stroke 160 mm Rapid traverse X/Z axis 60/45 m/min Power main drive (100% ED) 16 kW Speed range 6000 rpm Power sub-spindle (100% ED) 7.5 kW Speed range 6000 rpm Number of tool stations 12 Cylindrical shank diameter 30 mm Number of driven tools 12 Drive power (40% ED) 10 kW RPM, max. 5000 min-1 C-axis speed range 0 - 200 min-1 C-axis positioning 0.001 degrees Connected load, total approx. 32 kVA Net weight with chip conveyor approx. 4300 kg Machine with chip conveyor L x W x H 3890 x 1555 x 1890 mm Accessories: Conveyor Pa ...
Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480
Key data: 330 mm, 635 mm, 210 mm
brand new, toolmaker accuracy DIN 8605 Center height 167 mm Center width 635 mm Circulation diameter. over bed 330 mm Circulation diameter. over cross slides 210 mm Circulation diameter. in the offset 480 mm Main spindle bore 40 mm Speed range 40 - 2500 rpm Cone in tailstock MK 3 Drive power 2.2 kW Standard equipment: - 2-axis digital display ACU-RITE® DRO 203 - Precision spindle bearing thanks to NSK® tapered roller bearings - Quick-change steel holder MULTIFIX® size MA - Chip collection tray with opening flap at the front - Movable steel holder protection - Rear splash and chip protection wall - Feed protection - Spindle cover - Removable bridge - Coolant system - Work area lighting - Thread clock - Large matt chrome-plated scales - Foot brake with brake pedal over the entire length -Operating instructions - CE declaration of conformity
Key data: 600 mm, 2000 mm, 400 mm
brand new, good handling due to feed switch via joystick and rapid traverse, full-fledged manual transmission with large speed range Technical data: Swing over bed 600 mm over support 400 mm Center height 300 mm Bed width 400 mm Center width 2000 mm Spindle bore 80 mm Speed range (21) 20-2000 rpm quill cone MK 5 incl. accessories: - Rear chip splash protection wall - Electr. Locked face plate/chuck protection - Guide and pull spindle cover - Coolant system - Machine light - Rapid traverse longitudinal and transverse/joy-stick - Feed longitudinal and transverse/joy-stick - Interchangeable wheels - 4-fold steel holder -Operating instructions additionally included in the price: - Fixed bezel 20 - 200 mm - Fixed bezel 180 - 340 mm - Mitlauf. Bezel 20 - 200 mm - Main motor 11 kW instead of 7.5 kW - Cross support machined with T-slots - Reduction gear for t ...
maximum number of results exceeded
please refine your search
