mark andy used for sale

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Markem Imaje 9410 Inkjet coders 2018, stainless inkjet coders, three in stock, HMI Touch screen controls, 1Ph

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible.

() is equipped with an insulated - and is ideal for industrial cooling processes. It has two powerful fans and integrated piping and controls. The coolant is glycol, and the refrigerant used is R-410A. The system offers a cooling capacity of 14 kW at an . () . (). The 5.5 kW electric motor operates at 380–415 V, 50 Hz, and 20 A current consumption. This compact unit enables efficient, reliable cooling in industrial processes. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: externally mounted cooling unit with glycol buffer storage tank, Cooling capacity: 14 kW, Pressure compressed: 4,2 bar, Pressure relaxed: 1,9 bar, Gross volume glycol buffer tank: 400 l, Power: 5,5 kW, Current: 20 A, Voltage: 380-415 V, Frequency: 50 Hz, Features: Cooling unit with 2 fans, glycol storage tank, piping, control system

Graphic Packaging 1111206 Carton Wraparound Multipacker GPI Marksman 750HS with Turner/Divider High-speed Graphic Packaging International Marksman 750HS continuous-motion multipacker, manufactured in November 2017 and designed for secondary packaging of beverage cans into mechanically locked paperboard multipacks. The machine was last used for packing 330 ml and 500 ml beverage cans into 4-pack and 6-pack configurations. The installed application is based on 66 mm diameter cans, with pack arrangements of 2 × 2 cans for 4-packs and 2 × 3 cans for 6-packs. Standard Marksman 750HS formats include 1 × 2, 1 × 3, 2 × 2 and 2 × 3 packs, with additional formats available through suitable change parts. Max continuous operating speed is 250 packs/min The cardboard carton blanks are wrapped around the grouped cans and secured using Graphic Packaging’s mechanical locking system. This produ ...

Secure approximately 840 m² of Layher Blitz façade scaffolding available now 🚀 Packages of this size are rarely available and offer an excellent opportunity for scaffolding contractors, construction companies, and resellers looking to expand their inventory quickly and cost-effectively 🔥   With approximately 840 m² of scaffold area and a 1.09 m system width , this package is ideal for façade projects, major construction sites, renovations, or expanding existing scaffold inventories. The package includes frames, U-decks (partially with access openings), guardrails, diagonals, toe boards, and base jacks, all based on the proven Layher Blitz frame scaffolding system ⚡   Particularly attractive is the quality mix ranging from 0 Star to 3 Star condition , offering a competitive entry price and strong potential for refurbishment, resale, or economic ...

CONTROLS   PLC SIEMENS SIMATIC HMI PRESS FORCES   total force (nominal): 250 to PRESS TABLE   table surface (left-right): 1950 mm   table surface (front-back): 1000 mm SLIDE   table surface (left-right): 1950 mm   table surface (front-back): 800 mm   stroke: 30 mm SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm   variable speed: yes   stroke rate (min.): 80 /min   stroke rate (max.): 400 /min   main drive power: 51 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 550 mm STRIP-FEEDER   feeder type: roll feeder DIMENSIONS / WEIGHTS   total weight approx.: 48000 kg ATTACHMENTS (PRESSES)   decoiler: yes   leveller unit: yes   strip feeder: yes Strip Feed Unit Manufacturer: Kohler Maschinenbau Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Decoiler Manufacturer: Kohler  ...

MARKATOR MV5 T0 ist eine Nadelpräger, konzipiert für präzises Markieren und Prägen mit hoher Genauigkeit und Zuverlässigkeit. Längsweg (X): 100 mm; Querweg (Y): 100 mm. Abmessungen: L 500 x B 400 x H 700 mm; Maschinengewicht ca. 100 kg. Kompaktes Format mit ausreichenden Verfahrwegen für kleine bis mittlere Bauteile. Erreicht enge Toleranzen; typische Anwendungsbereiche: Uhrmacherei, Schmuck, Automobil, Luftfahrt, Medizintechnik und Werkzeugmaschinenbau Technische Daten ohne Gewähr

MARKATOR MV5 T0 ist eine Nadelpräger-Maschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Längsweg (X-Achse) 100 mm und Querweg (Y-Achse) 100 mm; geeignet für die Kennzeichnung kompakter Werkstücke. Hauptdaten: Maschinengewicht ca. 100 kg; Abmessungen L 500 mm × B 400 mm × H 700 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizin. Technische Daten ohne Gewähr

Used line for packing tablets into plastic tubes. Produced by Mark Maker Pharma Engineering. Manufacturer's documentation.

Vertical milling machine Mark ACE BJ 1998

Key data: 700 mm, 400 mm, 500 mm

Photon Energy Workstation XXL II CEPHEUS Mark12 – USP/picosecond laser system For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. The system is particularly suitable for operators of existing Photon Energy / Hitachi systems, medical technology companies, laser marking service providers or companies with a need for UDI-compliant, permanent marking. Key data: Year of manufacture: February 2023 Runtime: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: less than 15 hp Repetition rate: 20 to 500 kHz Cabin dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 axis of rotation available PHOTONmark, PUC / UDI Control, CamVisionPro and handheld scanner available Last ...

Technical data & equipmentManufacturer: BORRIES Markier-Systeme GmbH Intended use: Legally required, permanent marking of hydraulic sockets, press fittings and metallic round parts (e.g. marking of standards, batch numbers, manufacturer's marks or hose types). Drive & control: Electromotive drive with built-in control cabinet. Operating modes: Manual / set-up mode / automatic mode (selectable by key switch). Safety: Integrated two-hand safety control (start button at the front) and main switch with emergency stop function. Tool holder & mechanics: Adjustable type wheel / embossing head for holding number, letter and symbol stamps. Manual height adjustment / height adjustment via handwheel for different valve diameters. Mechanical prism holder / bracket for cylindrical components and hydraulic sockets. Incl. accessories

Markant 2ABK - Folding machine - segmented upper bending beam - Year of construction 1998 Technical data - Max. working width: 1020 mm - Max. sheet thickness (steel St37): 2.0 mm - Max. sheet thickness (VA / stainless steel): approx. 1.2 mm - Max. sheet thickness (aluminium): approx. 2.5 – 3.0 mm - Max. bending angle: 45° - Opening width upper/lower beam: 25 – 50 mm - Weight: approx. 300 kg

passage width:500 mm working heigth:150 mm total power requirement:250 kW dimensions of the machine ca.:10 x 3 x 3 m heating capacity:2 x 50 + 2 x 33 =166 kW drying plant - electrically heated:2 units: 40 + 53 KW cleaning pump:in gesamt ca. 20 kW 1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

Set of 8 boxes of 9 PANTONE double-pointed markers – 72 markers Lot composed of 8 boxes each containing 9 Pantone double-pointed markers, i.e. 72 markers in total. Important information – to be read before bidding Goods from discontinued and surplus products, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-41

According to the description below

; operational

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 90 mm -Dimensions: 105/110/H68 mm -Weight: 3.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: - mm -Dimensions: 210/85/H225 mm -Weight: 10 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg

Properties: Used labeling machine with labeling system Very stable design Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Technical data: Manufacturer: SRD Type: Stano/- Alone-Line Device: Valentin SPE 106/12 Semi-automatic labeling system for image and sound carrier See user manual, schematic and pneumatic diagram Changes and errors in the technical data as well as intermediate sale reservations Roller track The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line before or between production and mach ...

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg

With the Xpress you get a reliable and easy-to-use product with the laser software MARKER, which is adapted to your individual requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. Convince yourself of our Xpress: Make an appointment with us and bring samples of your materials to be processed. We would be happy to introduce you to our Xpress. Laser safety goggles are required for this system. We offer these for spectacle wearers and non-spectacle wearers. Laptop/PC customer provision!

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Dimensions: 153/76/H132 mm -Weight: 6 kg

Key data: 800 mm, 500 mm, 110 mm

Scribing plate C.Stiefelmayer Good condition

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -Dimensions: 151/78/H132 mm -Weight: 6.2 kg

Light mark projector for flame cutting machines with drawing scanning -Type: 1.4 -Power: 24 V/100 W -f: 110 mm -Price: per piece -Number: 2x available -Dimensions: 230/93/H125 mm -Weight: 0.8 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg

Key data: 500 mm, 500 mm, 90 mm

Scribing plate tap and piston Used Condition: Good

Key data: 300 mm, 200 mm, 70 mm

Scribing plate With grooves Condition: Good

Inv. Num. : 7597 Type: Bylaser 2200 M Producer: Bystronic Created: 2006 Parameters: Laser power: 2.2 kW Work table length: 3000 mm Work table width: 1500 mm Machine weight: 1100 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 170/90/H200 mm -Weight: 10.2 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: with 2 prisms, for marking plate, clamping plate, straightening bench ... -Prism width: 8/15 mm -Dimensions: see photo technical drawing -Dimensions: 152/40/H25 mm -Weight: 1.1 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 29 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.2 kg

Inv. Num. : 7570 Type: TruMatic L 3030 Producer: TRUMPF Created: 2001 Parameters: Laser power: 1800 W Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 115 mm

table length: 1000 mm table width: 1008 mm table height: 130 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 51 mm -Dimensions: see photo technical drawing -Dimensions: 60/44/H50 mm -Weight: 0,8 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 22 mm / 90° -Dimensions: see photo technical drawing -Dimensions: 100/25/H21 mm -Weight: 0.3 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 30 mm / 70° -Dimensions: see photo technical drawing -Dimensions: 150/48/H37 mm -Weight: 1.7 kg

Inv. Num. : 7721 Type: COMPACT Producer: VANAD Created: 2015 Parameters: Operating hours: 5000 h Work table length: 4000 mm Work table width: 1500 mm Machine weight: 6000 kg Equipment: Eagle Compressor

Marking laser TRUMPF VECTORMARK Compact VMc5 HSR 10 P0 30 W pp 200 kW t 5 - 200 ns F 100 kHz Documents available. Dimensions: 670 x 250 x 310 mm

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.5 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.5 kg

Horizontal stack delivery with pressing and marking device Heidelberg SBP 46.D + MKE.D Year 1998 - Serial-No. 106026/98-263536 Sheet size min. (width × length) 120 × 100mm Sheet size max. (width × length) 460 × 300mm Product thickness max. 4mm Pile length 800mm Pressing force 8,000 N Infeed height 360-960mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg

Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test