marine engine used for sale

LISTING ID: 22630 BRAND:IVECO MODEL: 8210 M22 POWER: 162 kW (220 hp) CD RPM: 2200 DISCPLACEMENT: 13.8 L BORE x STROKE (mm) 137 x 156 COMPRESSION RATIO: 16:1 HS CODE 84081019 NET WEIGHT 1130 kg (Dry)

2 X ENGINES FOR SALE Brand: MITSUBISHI Model: S12A2 C2 MPTK (FW) Power: 634 kW (850 hp) 1940 rpm Specification: Flywheel housing: SAE-0, Flyvheel: 18 Inch, Starter: 2x 24V, Governor Cooling system: Keel cooled Remarks: R41E3022300 HS CODE 84081019 Dimensions (cm): 230 x 165 x 160 Dry weight (kg) : 3800

Brand: YANMAR Model: 6AYM-WET Power: 555 kW 1840 rpm Condition: Brand New Country of Origin: Japan Serial Number: 9501 HS CODE 84081079 Weight (kg) :2365 (without marine gear) Dimensions (cm) 200×130×143

LISTING ID 22518 Brand: YANMAR Model: 6HYM-WET Condition: Brand New Specification - Model : 6HYM-WET - Number of cylinders: 6 in-line - Bore × stroke (mm) : 132.9 × 165 - Displacement (lit): 13.733 - Rated output (kW(hp)/rpm):M : 441(600)/2100 - Combustion system: Direct injection - Aspiration: Turbocharger + intercooler - Starting system: Electric starting motor (24V 6.0kW) - Cooling system: Heat exchanger - Size of flywheel housing and flywheel: SAE #1 and 14 in.

BRAND: CUMMINS MODEL: KTA19 M3 POWER: 447,42 kW (600 hp) 1800 rpm Condition: New Features:, Flywheel housing ,Flywheel ,Governor ,Exhaust system, ,Cooling system ,Starter/Panel ,Water Pump ,Oil Filters ,Turbocharger Weight (kg) Engine: 2200 Dimensions (cm) 210 x110 x170

ABC 8MDXC.750.100A SN N11848 883 kW 1200 hp 750 rpm

LISTING ID 22412 BRAND: CATERPILLAR MODEL: 3412 POWER: 537 kW - 720 hp 1800 rpm RPM: 1800 CONDITION: Used Running Take Out Features Flywheel housing Governor Exhaust system Cooling system Starter / Panel Engine Mounts Weight (dry): 2459

MITSUBISHI S6A-300-3 300 HP 1530 RPM (S6A3 MPTK 405 kW 1840 rpm) Dry Weight :+/- 1900 kg Dimensions: 209 x 101 x 137 cm

MITSUBISHI S16R-C2 MPTK (FW) Power: 1700 HP 1600 rpm Features: Flywheel housing,Flywheel,Starter,Governor,Exhaust system,Turbo, Cooling system Engine Specification: 16-cylinder 4-stroke Water-cooled diesel engine With direct-injection, turbocharger Air-cooler Fresh water cooling Bore x stroke (mm) : 170 x 180 Displacement (l) : 65.37 Dimensions (cm): 308.6 x 162.2 x 196 Dry weight (kg) : 6900 Type Approved: Yes

LISTING ID: 22764 BRAND:MITSUBISHI MODEL: S12R-MPTA POWER: 880 kW (1180 HP) RPM: 1600 RPM Running Take Out Features: Flywheel housing,Flywheel,Governor,Exhaust system,Turbo,Cooling system,Starter,Water Pump Weight Dry (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Make: MAN Model: D2876LE423 Engine type: Four Stroke Direct Injection Cylinders: 6 Output: 588 kW Speed: 2300 rpm Mfg year: 2013 Condition: New and Unused.

1x Engine D13B-N MH (FE), Serial Number: 10132024097 - 1x Twin Disk Ship Reversing Gear, Serial Number: 2437795 - 1x Phyton-Drive, type P501-L-80, for 80 mm shaft incl. adapter flange for MGX 5114 - SFK bearings (HEPA) - 1x Automatic lubrication system for shaft system - 1x intermediate shaft (Stuth), incl. 2x shaft flange, incl. 6x shaft pins, incl. 2x keys for intermediate shaft - 1x pillow block housing - 1x spherical roller bearing - 1x Clamping sleeve - 2x fixed ring - 1x four-lip seal for housing Volvo warranty extension until December 2025

Iveco AIFO Marine Diesel Engine with ZF Marine Transmission Used marine diesel engine assembly equipped with a ZF marine transmission. The engine includes twin MANN W 1170/7 oil filters, a Bosch 24 V electronic control module, turbocharger, intake and exhaust system, hoses and associated pipework. Manufacturer: Iveco AIFO Engine type: Marine diesel engine Oil filters: 2 x MANN W 1170/7 Control system: Bosch 24 V electronic control module Transmission manufacturer: ZF Transmission part list number: 3215004655 Transmission ratio: 2.07 Transmission oil: SAE 30, approximately 7.0 l Clutch oil pressure: 20 Approximate dimensions: 1,800 x 1,100 x 1,300 mm Approximate weight: 1,200 kg The engine and transmission are offered in used condition with visible surface corrosion, weathering, paint deterioration and wear on hoses and pipework. The engine, gearbox, control ...

MWM Inline Six-Cylinder Turbocharged Diesel Engine Large MWM marine/industrial diesel engine with mechanically governed fuel injection, liquid cooling and charge-air intercooling. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Induction: Turbocharged with charge-air cooler Fuel system: Mechanical injection with six high-pressure injection lines Equipment: Injection pump, turbocharger, charge-air cooler, starter, alternator, filters, cooling system, pipework and flywheel/coupling assembly Charge-air cooler: Ladeluftkühler by Motorenfabrik Langenstein & Reichert GmbH & Co. KG Condition: Used, stored outdoors Approximate dimensions: 2,200 × 1,100 × 1,450 mm Approximate weight: 2,500 kg The engine appears substantially complete but shows surface corrosion, oxidized fittings, deteriorated paint and weathering from prolonged storage. So ...

MWM Six-Cylinder Diesel Generator Set Open-frame stationary diesel generator set comprising an MWM inline six-cylinder diesel engine directly coupled to an AC alternator. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Fuel system: Individual mechanical fuel-injection elements and lines Cooling: Liquid-cooled Equipment: Dry-type air cleaner, dual fuel filters, starter, charging equipment, cooling system and separate control panel Monitoring: Carlo Gavazzi Mini TOL 122B alarm and monitoring unit Hour counter: Approximately 3,168 hours, photo-indicated Condition: Used, stored outdoors Approximate dimensions: 2,600 × 1,050 × 1,500 mm Approximate weight: 2,200 kg The generator set appears substantially complete but shows widespread corrosion, oxidation, dirt, biological debris, aged hoses and weathered wiring. Portions are wrapped for storage ...

Reduction 6:1

Reduction 4.17 : 1

REINTJES WAF 560 5.05:1

For sale: REINTJES Marine gearbox WAF 560 Reduction: 5,947:1 Built 1992 The gearbox is in very good condition, always stored in facility with climate control. Price is Ex Works - The Netherlands. In case you need we can arrange the transport with very interesting rates. if you need further assistance or information please e-mail us: info@amp-power.nl Pictures available on request

MARINE GENERATOR SET Mitsubishi STAMFORD ALTERNATOR 295 KVA / 1500 RPM

FOUR(4) PCS - MARINE GEARBOX TWIN DISC MG6848SC 2.931:1 MARINE GEARBOX TWIN DISC MG6848SC OVERHAULED COMPLETE WITH NEW HYDRAULIC HOSES AND CONNECTIONS

USED MASSON MARINE GEARBOX

REINTJES MARINE GEARBOX - WAV 550 B - 5.158:1

REINTJES MARINE GEARBOX - WAV 500

TWIN DISC MARINE GEARBOX MG 516 RATIO 6:1 RUNNING TASKS OUT IN GOOD CONDITION

SOLD MARINE GEARBOX WITH PTO GUASCOR R360 4,4:1 SERIAL NUMBER 113058 MANUFACTURING DATE 13-11-2009

20167 ZF BW 251 - 4.792:1 A 0.346 KW/RPM Brand Gearbox ZF Model Gearbox BW 251A Ratio 4.792:1 A Power 0.346 KW/RPM RPM 1800 RPM Serial Number 3815 General condition Taken out running condition With Flexible Coupling With SAE Housing With Controls Mechanical With Mounting Brackets SAE 0 Weight (kg) 880 Dimensions (cm) 100 x 105 x110

Plate heat exchanger with marine grade steel clamping device and titanium plate pack.

From stock of Marine Consilium Selesmar MM950/A Marine Radar Monitor for sale ! MM950/A 20C ARPA DISPLAY UNIT TYPE 10MC-003 MM950 KEYBOARD UNIT TYPE 10KB-001

Listing ID: 22624 Brand: ZF 350 Model: 350 Power: 324 kW(435hp) 1800 rpm (CD) Ratio: 2,077:1 SN 20030818 Features: SAE Housing, Controls Mechanical ,Hydraulics ,Oil Filter HS Code: 84836080

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

BRAND: ZF MODEL: ZF 2555 RATIO: 2,333:1 POWER: 706 kW(960 hp) 1800 rpm Features: SAE-Housing: SAE-0, Flexible Coupling with Aluminum ring,Controls, Oil Cooler, Brackets, PTO Oil Cooler and Filters Aluminum Ring SN 50010644 HS Code: 84836080 NET WEIGHT 640 kg DIMENSIONS (cm) 90 x 120 x 90

Consilium Selesmar 972981 A2 R.H 972984 From old stock

MIRKA marine finishing kit for boat surfaces. Contents: microfibre cleaning cloth, Polarshine polishing pad, 150 mm fur pad, Polarshine 10 polishing compound, ABRALON 150 mm Grip abrasive pads in grit 2000 and 4000. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-50

Heavy-Duty Marine Wire-Rope Winch Used commercial marine winch suitable for hauling trawl equipment, fishing nets, ropes and other heavy lines. The winch is equipped with a large single steel drum, multi-layer steel wire rope, reduction gearing, powered drive and mechanical band brake. Machine type: Marine/fishing wire-rope winch Application: Trawl, net and gear hauling Drive: Powered drive with reduction gearbox Drum: Single steel wire-rope drum Rope: Multi-layer steel wire rope included Brake: External mechanical band brake with manual lever Approximate dimensions: 1,500 x 1,000 x 1,100 mm Approximate weight: 750 kg The winch is offered in used condition with significant corrosion on the wire rope, drum flanges, brake mechanism, fasteners and structural frame. The rope termination is heavily weathered. The wire rope, brake lining, gearbox, bearings and drive re ...

Heavy-Duty White Braided Marine Rope Lot Large lot of used off-white braided synthetic marine ropes stored on wooden pallets. The lot includes continuous rope coils and shorter pre-cut rope assemblies or loops secured with black cord. Suitable for general marine, fishing, aquaculture, handling and non-critical mooring applications. Rope type: Braided synthetic marine rope Colour: Off-white Approximate diameter: 20–30 mm Storage: Coils and rope assemblies on wooden pallets Approximate dimensions of complete lot: 2,400 x 1,200 x 1,000 mm Approximate total weight: 450 kg The ropes are offered in used condition with dirt, green biological staining, weathering, surface fuzzing, abrasion and localized fraying from outdoor storage and previous use. The lot is not represented as certified for lifting or safety-critical mooring applications. Auction-ID: A7-50995-8

Palfinger Marine PK 12080 MB S1.2 Hydraulic Knuckle-Boom Crane Used marine hydraulic knuckle-boom crane suitable for lifting and handling loads. The crane is equipped with a folding articulated boom, hydraulic extension sections, hydraulic cylinders, hoses, control valves, operating levers and a wire-rope winch assembly. Manufacturer: Palfinger Marine Model: PK 12080 MB S1.2 Year of manufacture: 1999 Serial number: Approximately 054092 Drive: Hydraulic Safe working load marking: 0.6 t Approximate dimensions: 4,300 x 1,600 x 2,200 mm Approximate weight: 1,500 kg The crane is offered in used condition as an untested project unit. Significant corrosion, paint loss and weathering are visible around the base, slew area, pins, fittings, hoses and exposed steel components. Hydraulic cylinders, hoses, valves, slew mechanism, winch and boom extensions require inspection a ...

Heavy-Duty Black Braided Marine Rope Lot Large lot of heavy black braided synthetic ropes stored in multiple pallet-sized piles. Suitable for commercial fishing, aquaculture, non-critical mooring, fendering, agricultural and general marine applications. Rope type: Braided synthetic marine rope Colour: Black Approximate diameter: 25–50 mm Storage: Multiple piles on pallets Approximate dimensions of complete lot: 2,400 x 1,800 x 1,200 mm Approximate total weight: 700 kg The ropes are offered in used condition with surface fuzzing, abrasion, dirt, vegetation contamination, weathering and localized fraying from previous use and outdoor storage. Individual lengths, exact material, breaking load and load certification are not specified. The lot is not represented as suitable for safety-critical lifting or certified mooring applications. Auction-ID: A7-50995-7

Heavy-Duty Marine Capstan / Mooring Winch Used marine capstan winch with a vertical warping head mounted on an enclosed steel gearbox housing. Suitable for handling mooring, towing and auxiliary marine ropes. Machine type: Marine capstan / mooring winch Configuration: Vertical warping head with enclosed gearbox Controls: Top-mounted handwheel for brake or clutch adjustment Housing: Heavy bolted inspection and gearbox cover Features: Lifting eye and steel gearbox housing Approximate dimensions: 1,500 x 1,100 x 1,100 mm Approximate weight: 900 kg The winch is offered in used condition with significant corrosion, rust staining, coating deterioration and weathering from outdoor storage. The gearbox, brake or clutch mechanism, bearings and drive components require inspection before operation. Auction-ID: A7-50995-13

Marine Inline Sight-Flow Indicators – 2 Units Lot of two bronze/brass inline marine sight-flow indicators for visual inspection of liquid circulation in seawater, cooling-water or pump systems. Each unit has a circular inspection window, bolted cover, opposing hose or pipe connections and an internal flow indicator. Quantity: 2 units Construction: Bronze/brass cast bodies Type: Inline liquid flow inspection glasses Approximate connection sizes: 1½–2 inches and 2½–3 inches Features: Circular inspection windows, bolted covers, hose tails, couplings and mounting feet Approximate dimensions of larger unit: 430 x 260 x 180 mm Approximate total weight: 8 kg The units are offered in used condition with marine oxidation, verdigris, surface dirt and weathering. The inspection windows are scratched, cloudy and dirty. Seals, gaskets, hose clamps and connections requir ...

Unused, Including trailer, 90L fuel tank, Captain chair rotatable and height adjustable, relax benches with backrest, storage compartments under seats, mp3 player with bluetooth, 5 speakers, navigation lighting, LED lighting under benches and under the boat, appearances for on the boat, stainless steel cleats, foldable bimini top in 2 parts, stainless steel swimming ladder, boat cover, 2 round tables with cup holders table is foldable, hydraulic steering system. Viewing by appointment only. Delivered as a kit, construction possible at an additional cost Auction-ID: A1-40330-30

Unused, 90L fuel tank, Captain chair swivel and height adjustable, changing cabin, relax benches with backrest, storage compartments under seats, mp3 player with bluetooth, 5 speakers, navigation lights, LED lighting under benches and under the boat, appearances for on the boat, stainless steel cleats, foldable bimini top in 2 parts, stainless steel swimming ladder, boat cover, 2 round tables with cup holders table is foldable, hydraulic steering system. New Yamaha engine available in different power outputs at an additional cost Trailer available at extra cost, will be delivered in kit Construction possible at extra cost Auction-ID: A1-40333-21

Condition : Very good ( tested) Manufacturer : Deutz Engine : Deutz 4 cylinder diesel air-cooled Type No. : F4L2011 Auction-ID: A1-51485-9

Different MTU - engines 8 V 396, 10 V 396, 12 V 396, 16 V 396 12 V in 2000, 16 V in 2000 12 V 4000, 16 V 4000 many spare parts:Kurbelwellen, cylinder heads, injection pumps, Turbos etc. Anew and used different year of construction different hours generator engine: We also build around to the ship engine! Inquiries please with full information of the type them need. Please, also engine. No. give.

SUB: FOR SALE... DAIHATSU 5DK 20E YOB 2013 CRANK SHAFT / ENGINE BLOCK / ALTERNATOR ETC TO WHOM IT MAY CONCERN; WE VE 2013 MODEL DAIHATSU 5DK 20E ENGINE BLOCK / STANDARD CRANK SHAFT / ALTERNATOR / CAM SHAFT AT OUR STOCK. READY TO TRANSPORT PLS FIND TECHNICAL DETAILS OF GEN SET ENGINE ENGINE BLOCK 5DK 20E SERIAL NO. 0216 CLASSED WITH LR ON 08-11-2013 CRANK SHAFT S NO. 730351.2.2 CLASSED WITH LR ON 07-10-2013 ALTERNATOR NISHISHIBA 700kW 575VOLTS 900 RPM YOB 07/2013 CLASSED WITH LR 60 Hz ADDATIONALY COMPLETE CAM SHAFT / FRONT TIMING GEARS ETC WE CAN SELL COMPLETE OR SEPERATLY WE SOLD CYLINDER HEADS PISTONS CON RODS / TURBO CHARGER / COOL ETC. Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Motor Lombardini LDW903,Deutz-Type=F3M1008 general-overhauled engine in off-exchange Email=info@miw-zeven.de

Deutz engine in replacement type=BF4M1008 Turbo refurbished Lombardini Type= LDW120T Turbo Price only on request email=info@miw-zeven.de

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty info@miw-zeven.de

CAT C13 overhault engine bloc (RECON) CAT C13 overhault crankshaft (RECON) CAT C13 overhault connecting rods (RECON)