126,776 used machines on RESALE, but how to find them? Machine Search
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
Sulzer 8ZAL40 S Crankshaft Available in our stock in Turkey Came out of 2015 Sulzer ZAL40S engine Std sized main journals and crank pins Without any cracks or welding Please contact info@fin-marine
Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg
Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.
Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m
Side channel blowers See nameplate, All 8 are the same!
Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition
We have 16 new MAN 28/32 engine connecting rods in stock. Part Number: 1152579
A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...
power capacity: 5,5 kW volt: 380 V ampere: 11,6 A weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,6x0,3x0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2700 KW, 1500 1/min
Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 MW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...
Make: Mak Model: 8M25C 8 cylinders n line IMO II Built year: 2014 Condition: New / Unused Output: Rated 2,666 kW at 750 rpm 2 Counter Clockwise rotation 2 Clockwise rotation Compressed air starting suitable for operation with MDO max. viscosity: 11 cST/40 C Fuel consumption: 187 g/kWH at 100% rated output 184 g/kWH at 85% rated output Quantity: 4 With ABS class certificate. Contact us at infoheeyas.co.uk #mak #engine #new #ship #vessel #boat #shipengine # caterpillar #makengine #power #energy #propulsion #sailing
Key data: 3000 KW, 1500 1/min
Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...
We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands
Engine suitable for 508, Unimog, 63 kW, 3782 m³, OM 314.948 with gearbox and add-on parts
AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .
used
Key data: 1067 KW
we are looking for a Jenbacher 3 1067 kw we have a biogas plant
Key data: 13 KW
Manufacturer: Rexroth Model No.: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13.3 kW 48 kg More engines new and used - you can find them in our shop! International shipping costs on request!
Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.
Key data: 165 mm, 750 mm, 2800 U/min
Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation
INDRAMAT Permanent Magnet Three-phase Servo Motor
INDRAMAT Permanent Magnet Three-phase Servo Motor
INDRAMAT Permanent Magnet Three-phase Servo Motor
Key data: 337 KW, 1500 1/min
New engine block Scania DI/DC12 with OE number 2055383 at special net price Net/piece 12.595€ Price is subject to VAT Gross price: 17.381€ MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone:0049(0) 4281-950583
Newly arrived new turbocharger Caterpillar 3512 B Cat part number 509-1017 Perfect machinery international bv info @perfectmachinery.nl +31 78 6158040 Whatsapp the Netherlands+31 653549259 Spain. +34 682511830
Perkins ISM Shibaura E 673 L, 3-cylinder water-cooled diesel engine, displacement 761 cm³, power 11.5 kw/15.4 hp / 3,600 rpm., unused, from stock, incl. starter, and alternator. Other 3-cylinder Perkis diesel engines available, also Isuzu, ISM, Iseki, Komatsu, Kubota, Lombardini, Yanmar.
Key data: 650 mm, 1300 mm, 1 U/min
Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
Engine Brand: ANGLO BELGIAN CORPORATION, Conditie: USED, Engine Color: Red , Engine Condition: Core , Rated Power: 662 Kw, Rated Speed: 750 Rpm, , https://www.hamofa.com/stock/diesel-engines/anglo-belgian-corporation- 6mdxc-used/350, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6MDXC
Engine Brand: MTU, Conditie: NEW, , https://www.hamofa.com/stock/diesel-engines/mtu-8v1600-g20f-new/261, , = More information =, , Type: Engine, Type number: 8V1600 G20F
Engine Brand: CUMMINS, Condition: USED, Engine Color: Beige , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Dry , , https://www.hamofa.com/stock/diesel-engines/cummins-qsm11-cpl8545-used /139, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: QSM11 CPL8545
Engine Brand: CUMMINS, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-qsk19-cpl2559-core /32, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: QSK19 CPL2559; Transport weight [kg]: 2100
Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg
Crankcase for Mitsubishi S6R-PTA for sale. Year of Make: 2012 Power: 515KW/1500RPM
Key data: 260 mm, 520 mm, 16 U/min
mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...
Key data: 55 KW, 300 1/min
Herford engine, 1-cylinder, horizontal, 300 rpm, 75 hp, overhauled
We sell a Carrier chiller 30 GH 100 0171 AEE, built in 1997
Key data: 625 KW, 2 1/min
2x Jenbacher gas engines JMS 312 built in 2008, with brand new generator, exhaust gas heat exchanger next to the engine, additional oil tank. No NOX control. Modules are stored and preserved, location Schleswig, Holstein, modules immediately available, ideal as exchange modules in the event of inspections or fire damage.
Key data: 400 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder
Key data: 340 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes
Key data: 400 mm
Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets
Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Key data: 460 mm
Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added
6x Containerized Guascor/Siemens G-86EM • Engine; Siemens G-86EM • Year of Construction; 2021 • Operation hours; 12,000 • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 45,7% • Voltage; 690V • Speed; 1.500 RPM • Frequency; 50Hz
Key data: 800 KW
Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale
maximum number of results exceeded
please refine your search
