136,887 used machines on RESALE, but how to find them? Machine Search
power capacity: 63 / 93 kW volt: 380 V ampere: 122 / 178 A weight of the machine ca.: 0,5 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete used MAN D2842LE409 engines., With only 250 working hours from new., Used tested engines, delivered with warranty., Complete with control panel., No gearbox; Mileage [km]: 12; Power [PS]: 1500
: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder
14.500 litre, Stock number: T3371, Litre: 14.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm, Agitator: Yes , Agitator type: 3 pcs. 3-bladed propeller, Agitator placement: From the top with bottom guide, CIP: Yes, 2 pcs., Working pressure double jacket: 4 bar, Inner diameter: Ø 2850 mm, Outer diameter: D 3000 mm, Total height: H 4400 mm
Key data: 681 KW, 1500 1/min
Jenbacher 316 Including: - Jenbacher Control (Diana Blue) - Gas line - On-site delivery and/or installation possible at an additional cost.
turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Jenbacher 320 Year of manufactory 1999 Running hours total 40265 Running hours after major ouverhaul 265 Condition excellent Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel Diana blue panel All communication kabels Batteries Pumps and pipes Full set of documentation Loading on truck include in price Price 43000 euro Extra Exhaurst heat exchanger Ventilation fans Oiltanks and pumps Transformer Switch gear VLT Radiator for intercooler Loading on truck include in price Price 7000 euro Dismantled and ready for loading
Jenbacher 316 Year of manufactory 1996 Running hours total 99800 Running hours after major ouverhaul 20000 Condition good Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel EMS 2000 panel All communication kabels Batteries Pumps and pipes Full set of documentation Loading on truck include in price Price 18000 euro Dismantled and ready for loading
Jenbacher 316 Year of manufactory 1997 Running hours total 38867 Running hours after major ouverhaul 38867 Condition good Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel Diane blue panel All communication kabels Batteries Pumps and pipes Exhaurst heat exchanger Full set of documentation Loading on truck include in price Price 26000 euro Dismantled and ready for loading
Key data: 180 mm, 2000 U/min
Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.
turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
