manufacturing line used for sale

Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc) ...

Line for painting door glass, consisting of: - automatic loader with flap arm equipped with LOGLAS 16.30 suction cups - automatic loader with bridge structure, programmed picking on LOGLAS/CL 16.30 trolleys - automatic oscillating spraying machine FALLENGLASS 1700 - year 2007, with belt conveyor covered with paper, complete with inlet roller conveyor extension with oscillating and ionizing blower unit - PRE-HEATING OVEN in-line with lower infrared lamps PRE/I-NIR - 180° sideshift with ventilated transversal flash-off oven with CEFLA GT180/3400/5500 air-heating coil - in-line drying oven with hot air and infrared lamps GLASSOVEN EL/7 - year 2007 - cooling tunnel with upper and lower air curtains CEFLA GLASSCOOL SI-3/3 - year 2007 - motorized conveyor VTR 2500 - automatic unloader on trolleys with CEFLA bridge structure UNLOADER -WASHING MACHINE NOT PRESENT- Auction-ID: A7-454 ...

Condition: Used Stock Number: 875B Marel Masterslice Type: TA1511 Marel Masterslice Serial number: 10090783 Marel Masterslice Year of construction: 2011 Marel Masterslice Outfeed conveyor 170 mm wide Marel Masterslice Dimensions: 2100 x 1000 x 1500 mm Marel Masterfill Type: TA1516 Marel Masterfill Year of construction 2011 Marel Masterfill Dimensions: 1000 x 750 x 1200 mm

Equipped with Pehu 320DSTV graphics control, size base machine approximately 1800x1560x2250mm, on primeval track already disassembled on and including 1 pallet Auction-ID: A1-45188-166

Type Selen-Y Electric, consisting of, 24x infrared heater module, 1x transverse bridge with double printing head, 1x transver bridge with 1 printing head, 1x winder Sander” AFW-1-1400-1200-12B (2022), 1x winder Sander” ABW-1-1400-1200-12-B with Siemens” touchpanel (2022), 2x Basler” machine vision camera with led lightning, 1-door switch cabinet with monitor (camera control unit), 1-door switch cabinet JAC de Vries” R324 (2022), 1-door switch cabinet Rimas” Pamela 1400 (2023), 2-door switch cabinet Sander” HSS-Pamela (2022) used floor space approximately 19.000x3000mm Auction-ID: A1-43459-11

Type: KS-SW-2-50-R-2-400-SPT-1400-12, consisting of, 1x Sander” winder type AFW-1-1400-1200-12-B with BSTgroup” digitial controller (2022), edge cutting system, 1x Sander” winder ABW-1-1400-1200-12-B with Siemens” touchpanel BSTgroup digital controller (2022), 2-door switch cabinet HSS-sara, used floor space approximately 7.500x2200mm, total weight approximately 5000kg Auction-ID: A1-43459-13

Type LAMB 1400, 2-layer, laminating pressure 4-6N/cm, laminating temperature 30-80°C, coating weight 3-5g/m2, production speed 1m/min, consisting of, 3x winder, 1x \"TSK LIA\"-brushing unit (2023) s/n 1311, horizontal wet proces cleaning unit, 3x IBC for demineralised water, 1x water treatment unit, overhead travelling crane with abus electrical chain hoist capacity 2000Kg, 1x \"Technotrans\" heating / cooling unit type teco tt 140.27.058, nominal heating/cooling capacity 27/200kW (2022), 1- \"Technotrans\" heating / cooling unit type teco wtd 150.09.25 nominal heating/cooling capacity 9/600kW (2022) 1x air-handeling cabinet, 1x 7-door switch cabinet. Used floor space approximately 13.000x7100mm Auction-ID: A1-43459-9

Used Holmüller” etching line, Schmid” combi line. Consisting of amongst others: Etching line parts, fans, 2x KWB” waste tank, combi cleanline parts Auction-ID: A1-43459-101

Type Connie 1400, consisting of, 1x IJssel technology” cutting knife, linear vacuum transport system equipped with 8 vacuüm suction cups travelling length 10.000mm, 1x Sander” winder AWB-1-1400-1200-12 with Siemens” touchpanel, 4x IJssel technology” mobile table dimensions 10.000x1500x930mm (can be divided in 2), safety fence, 1x 1-door switch cabinet IJssel technology” with Siemens” touchpanel, 1x 2-door switch cabinet, used floor space approximately 16.600x5000mm, total weight approximately 5000kg Auction-ID: A1-43459-15

Unused!, Consisting of: steel chamber hull with various fixtures like sensors, valves and piping, steel structure with platform and stairs 5x vacuum valve manifold cabinet, lot of steel structures (not mounted), casco dimensions approximate, 13.000x5000x4000mm, total used floor space approximately 12.000x20.000mm Auction-ID: A1-43459-5

Type Reco 800, consisting of: roll unwinding system with portal crane and Abus” electric chain hoist capacity 1000kg, Kroenert” applicator unit, laminator unit, overhead ir heater, 3-zone drying tunnel, pulling station and rewinder, 3 Pfeiffer” vacuum pumps type HiScroll 12, Wiltec” glue mixing and dosing unit type 46.2Kgluemix VR, Technotrans” modular temperature control unit type teco wd 150, heating / cooling capacity 9/600kW, 1 pneumatic switch cabinet, 11-door electrical switch cabinet, used floor space 19.000x4200mm, total weight approximately 30.000kg Auction-ID: A1-43459-14

Consisting of: Branson” welding unit type MWX100 built on transversal system with control module type VersaGraphix and spare welding unit MWX100, 2x Sander” winder types ABW + AFW-2-1400-1200-12-B with 1x Siemens” touchscreen panel, both equipped with cooling ventilation and enclosure, Sander” 2-door switch cabinet, used floor space approximately 7.800x3600mm, total weight approximately 5000kg Auction-ID: A1-43459-12

Type D350H.1, consisting of amongst others: retractable side panel, 7x Ebara” dry pump type AAS200/100/70WN, 1x Edwards” mechanical booster type EH 2600 IND, 5x Trumpf” RF generator type PFG5000RF, 2x type PFG1000RF and 1x type PFG1600RF, 1X Marx” transformer, 4x 2-door electrical switch cabinet, 3x i-chamber gas cabinet, 1x Single” temperature controller type STO 1-24-24-D2/ZGD (2010) and 2x type STO 1-6-12-D0/D2 (2010), combined piping and steel structure with platform and stair, used floor space approximately 9000x8500mm Auction-ID: A1-43459-4

Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                         ...

Type D1340, Roll-to-Roll top cel deposition line, consisting of amongst others: (ground floor) 11x Trumpf” RF generator TruPlasma RF series type 3000 G2 (2022), 5x Edwards” vacuüm - booster combination Drystar vacuümpump type GV250 -” type EH2600IND Booster 380 (2008), 2x Druschke” vacuüm - booster combination vacuümpump type A70561900 - Druschke” booster type A307-51-935, 4x Single” high temperature control unit type STO 1-9-42, coolingsystem with 2 x Grundfos” pump type DE7309BE, UV light, pressure vessel, Alfa laval” plate heat exchanger, 1x retractable side panel. On the first floor, consiting of: 7x water manifold, 10x 2-door electrical switch cabinet, 1x 1-door electrical switch cabinet, 2x Edwards” booster type EH4200 IND, various messuring equipment. On the second floor, consisting of: 1x pressure valve cabinet, 4x Single” high temperature control unit typ ...

Longitudinal cutting line for sheet metal coils, consisting of: - 1 decoiler with loading trolley - 1 cutting head - 1 hole passage table - 1 pneumatic press with felt - deburring rollers - 1 x 1-arm discharge flag EXCLUDING trim winder Technical data: Maximum cutting width 1200 mm Strip thickness from 0.30 mm to 1.20 mm Line working speed 180 mt/min Maximum coil weight 6,000 kg Coil OD up to 1200 mm Electrical panel upgraded in 2016 DOCUMENTS, MANUALS and LAYOUTS NOT AVAILABLE MANUFACTURER, MODEL AND DATE OF CONSTRUCTION NOT DETECTABLE MACHINE NO CE Auction-ID: A7-45688-1

Consisting of: 4-zones with 8 connected process modules : feeding, brush, blow-off, ultrasonic cleaning, blow-off/tensioning/blow-off, 4-step cascade rinsing, blow-off and drying module, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2009), 2x winder / unwinder unit equipped with Boschert” safety-chucks and enclosure, one side has built-in cooling fans, with 2-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, 3-door electrical switch cabinet, used floor space approximately 18.500x6000 Auction-ID: A1-43459-19

Stork B.V. cut up line, model: ACM-MX, dimensions: 19000 mm x 1700 mm x 2980 mm.

Consisting of: 8 connected process modules : feeding, pre-rinse, blow-off, caustic bath, blow-off, flush bath with 4-step cascade rinser, acid, flush with 4-step cascade rinser, isolation and drying module, 2x Kampf” winder / unwinder unit with Boschert” safety chucks, 2-door electrical switch cabinet, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2008), powder dosing / mixing unit, 6-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, used floor space approximately 17.500x6000mm Auction-ID: A1-43459-18

Townsend mobile linking and hanging line, consisting of: Townsend mobile linker, type: RT-7, serial number: 393 A, 380 V, 3 Ph, 50 Hz, 8.3 A, year of construction: 1989, dimensions: 2500 mm x 700 mm x 1700 mm and mobile hanging line, dimensions: 3900 mm x 600 mm x 1450 mm.

Equipped with Ebner” pre-heating module, Deposition chamber, HTS” gas injection system, emission control unit with Montair” Scrubber and 3-zone cooling unit, oven partially constructed of stainless steel, 3x Single” heating / cooling unit, STO 1-24-60-D3/L, 69.6 kilowatt, (2008) 31.9 kVA, coil/pump unit, 17-door electrical switch cabinet, chemical cabinets, Including heating element and lifting beam, used floor space approximately 10.000x5000mm Auction-ID: A1-43459-28

Consisting of: 14 connected process modules : feeding, blow-off, 3x lye bath, blow-off, 4-step cascade rinser, flush, acid, flushing, brush, flush, inspection, drying and output module, 2x winder / unwinder unit equipped with Boschert” safety-chucks and enclosure, one side has built-in cooling fans, 4x Becker” vacuüm pump type SV1100/1 enclosed in soundproof stainless steel cabinet (2022) 5-door electrical switch cabinet, walking platforms with stair, used floor space approximately 26.000x6000mm Auction-ID: A1-43459-17

Type: AHT 2150-ek-so, with 3 Annealing-drums, max. temperature 200°C, heated by electric tube radiators, capacity 84kW (24 x 3,5 kW) , flowrate 50.000m3/h, build in isolated housing, dimensions approximately 6800x4600x4000mm, 2-door switch cabinet with ”Siemens” touchpanel, 1x Sander” multi position winder type AFW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 1x Sander” guidance unit type ABZ-1400-1200-12 (2023), 1x Sander” (un)winder type ABW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 4-door switch cabinet, Used floor space approximately: 15.500x6000mm. Auction-ID: A1-43459-8

Consisting of: 1x BZT” 3-axes bridge milling machine type PFU-S 1020-G with Siemens” touchscreen panel and Vevor” industrial chiller type CW-5200, 1x Rösler” transversal blasting head with Rösler” dry blasting unit combined with Nederman” dust collector type MJC-MINI (2023), 1x brush-roller cleaning unit with Milltech” dust collector type HVU solo 18 performance, 2x Sander” winder type AFW-2-1400-1200-12-B 1x equipped with Siemens” touchscreen panel and 2-door switch cabinet, used floor space approximately 12.500x6200mm Auction-ID: A1-43459-10

Material weighing system, complete with nr. 3 sensors, exhaust valve and rotary valve. Control panel not included. Serial: 1 Estimated weight: 400 kg Approximate dimensions: 1200x800xh500 mm 1200x1200xh1900 mm Auction-ID: A7-44996-30

Stork B.V. cut up line consisting of: - Wing stretcher module, serial number: 10034849, year of construction: 2002. - Wing tip cutting module, model: MX HS, serial number: 10018514, year of construction: 2000. - Second joint cutter module. - Total dimensions: 15000 mm x 1500 mm x 2200 mm. Incomplete. Without transport belt.

Works perfectly Full line Panel press Oil heating Power 31kw 250/130cm Automation of press entry and exit Ejector to moulder for example ORMA SC2R-300 gluing machine at press infeed 380V Auction-ID: A3-43511-36990

Stork B.V. leg deboning line, consisting of: - Drumstick deboning module, type: 37112717, serial number: 10030871. - Hanging station, type: 1711213, serial number: 10030864, whizzard knife. - Thigh bone scraper, thigh meat harvesting module, type: 3711218, serial number: 10030872. - Shackle washer, type: 1242700, processing station, type: 3711214, serial number: 10030869. - Total dimensions: 10500 mm x 3200 mm x 2700 mm.

Bulk of food packaging Premium LINE, disposable knives, forks, spoon cups, cups, salad bowls, bowls, sausage plates, aluminium packaging, bowls with lids, soup bowls, paper plates, coffee cups, coffee spoons, chicken bags and delicatessen bags Auction-ID: A7-45677-107

Meiko Rinsing Line + Disinfection - Automatic Topline 40, Year 2020 unused! With dishwasher + 3 spout basins, ready to connect, VDE tested Auction-ID: A7-45677-83

Meiko Dishwashing Line + Disinfection - Automatic Topline 40, built in 2020, with a spout basin + sink base cabinet + wall shelf, ready to connect, VDE tested Auction-ID: A7-45677-85

Length 7 meters, extendable behind part 150cm total 850cm. Concerns trailer from 2017 is unused. Auction-ID: A1-42013-89

Equipped with: Charging cable. Reversing camera, full map navigation system, Bluetooth phone preparation, keyless entry, cruise control, automatic air conditioning, heated front seats including heated steering wheel and LED daytime running lights. ABS / Anti Lock Braking System, ESP / Electronic Stability Program, traction control & anti slip control, hill hold function, multiple airbags (front, side and head), automatic low beams, electrically adjustable, foldable and heated exterior mirrors, electric windows front, extra tinted glass, automatically dimming interior mirror, central locking with remote control and a multifunctional leather steering wheel. Auction-ID: A1-42013-181

Lot concerns container including approximately 2500 meters of ship mooring lines Auction-ID: A1-40134-337

Incl. steel measuring plate with table size 1200x800x30 mm (overall dimensions 1200x800x150 mm) Auction-ID: A1-45714-42

Various pneumatic linear actuators, cylinders and ball rail guides, excluding pallet trucks Auction-ID: A1-45714-21

Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 3 ...

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

2018 Dr. Collin ZK 16 Twin-Screw Lab/Pilot Polymer Extrusion Line Overview Excellent opportunity to acquire a complete, high-quality laboratory/pilot extrusion line manufactured by Dr. Collin GmbH, an industry leader in R&D and polymer processing equipment. Built in 2018, this co-rotating twin-screw extrusion line (ZK 16 model) is specifically designed for processing plastic materials in small batches, making it ideal for research and development, testing, compounding, and new formulation development. Key Technical Specifications Manufacturer: Dr. Collin GmbH – Lab & Pilot Solutions Model: ZK 16 (Twin-Screw Extruder) Year of Manufacture: 2018 Condition: Used (Dismantled and ready for transport) Screw Diameter: ~16 mm (Co-rotating twin-screw) Power: 8 kW Voltage/Current: 400 V + N + PE / 15 A / 3~ 50 Hz Operating Pressures: Water: 4 bar / Compressed Air: 4 ...

Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 600 bph

A complete Groninger bottle filling line is available. 1) Bottle unscrambler Groninger ZSB 2000, year of manufacture: 1995. 2) Filling machine Groninger DFV 1000Q, year of manufacture: 2013, filling stations: 10, additional function: transverse transfer system, output: approx. 9000/h, dosing range: 5ml-1000ml, container height range: 30mm-250mm, transport cup dimensions X/Y: 108mm/80mm, operating hours: approx. 24100h. 3) Cap sorter Groninger ZSK 1500, year of manufacture: 1995, sorting disc speed: 25rpm. 4) Capping machine Groninger KVK 106, year of manufacture: 1995, max. capping output: 9000/min, max. container diameter: 100mm, max. container height: 200mm, machine dimensions X/Y/Z: approx. 3400mm/1450mm/2550mm, weight: approx. 1500kg. 5) Discharge conveyor Groninger, year of manufacture: 1995. Documentation available. An on-site inspection is possible.

Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 ca ...

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Depalletising and palletising system for Euro pallets with PETCYCLE crates. The empties pallets arrive via a lift from above. They first pass through a pallet denester, in which the empties are fixed, the transport securing cord is cut off and vacuumed. The crates are then destacked and transferred to the bottle ejector. The pallets continue to the pallet magazine/loader. After the pallets have been reloaded, they are secured with a cord and transported upwards in the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletising and palletising, Unloading capacity: 3600 crates/h, Loading capacity: 3600 crates/h, Power: 21 kW, Voltage: 230/400 V, Frequency: 50 Hz, Compressed air: 6 bar, 30 Nm³/h, Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x ...

Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner., Additional title: semi-automatic, Capacity: 240 cph, Power: 0.3 kW, Current: 1,85 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 3.2 cbm/h at 6 bar, Length: 5000 mm, Width: 3000 mm, Height: 2300 mm, Operation / Control: SPS S7-200, Features: Single-point, semi-automatic canner Transport unit washer and turner