manufacturing line used for sale

Height 690 mm, travel 7150 mm, mounted on steel beam Auction-ID: A7-45263-26

Height 760 mm, mounted on steel beam, travel 7150 mm, incl. REXROTH MS2N07-B1BNN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-45263-24

- Edge profiling, sanding and painting system - Serial number 03083 - Total installed power 117 KW - Working width from 200 mm up to 2500 mm - Workpiece thickness from 6 mm up to 80 mm - Minimum workpiece length 90 mm - Adjustable feed speed from 5 m/min up to 44 m/min - Power of the feed motors: 7,50 KW and 0,75 KW - Power of the machine opening motor 1,50 KW - Machine equipped identically on both sides with 9 units on each side: - 1 - Milling unit: adjustable in depth, height and inclination, motor 7,50 KW-6000 rpm - 2 - Milling unit: adjustable in depth, height and inclination, motor 4 KW-3000 rpm - 3 - Fine milling unit: upper and lower motor with 1,80 KW-12000 rpm each, tiltable up to 45° - 4 - Belt sanding unit: motor 2,20 KW-940 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad - 5 - Belt sanding unit for upper bevel: Motor 1,10 KW-930 rpm, swi ...

Height 700 mm, mounted on steel beams, travel 7150 mm, incl. REXROTH MS2N07-B1BNN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-45263-23

- Sanding width approx. 1100 mm. - Workpiece thickness from approx. 4 mm to approx. 160 mm. - Variable feed speed. - It consists of:. - VIET VALERIA 3CCC INF. 1100 bottom grading sander: serial number 48051373, groups: grooved steel gauging roller, grooved rubber gauging roller, grooved rubber sanding roller. - VIET S3 331 TM Top Calibrating Sander: serial number SA/003920, 4 groups: grooved steel gauging roller, grooved rubber gauging roller, grooved rubber sanding roller, cleaning brush. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-2

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Filling Line: IMMEA DSP 40 R – Weight filling of paint cans with integrated analogue scale, roller conveyor, dosing head and feed hopper Serial Number: 907 Order: Emergency stop, dosing controls, electrical box with main disconnect switch and 24VDC power supply Mixer: GRENIER-CHARVET Type PR 300 – Vertical central shaft mixer with mechanical speed variator, three-phase electric motor, up/down control and dedicated electrical panel with rotary disconnect and Siemens switchgear Mixer serial number: 10981 Hopper: Upper metal product feed hopper with gravity outlet to the dosing head Tanks: 4 mobile stainless steel tanks on wheels, equipped with side handles and threaded drain valves Auction-ID: A1-44895-14

ZUCHETTI – Production Line for Metal Pipes General data: Manufacturer: Zuchetti Machine type: Pipe production line Year of manufacture: 2006 Weight: approx. 80000 kg Dimensions (L x W x H): approx. 150000 x 12000 x 2500 mm Condition: Partially overhauled Line components: Double uncoiler for continuous feeding of metal strips Welding junction station for seam joining Horizontal sheet uncoiler for optimized production flow 9 profiling stages for pipe forming High-frequency welding system for durable weld seams Turk heads for final processing Automatic packaging station Electrical panels for control and safety Available roller sets: Square pipes: 10x10 mm; 15x15 mm; 20x20 mm; 25x25 mm; 30x30 mm; 35x35 mm; 40x40 mm; 50x50 mm; 70x70 mm Round pipes: 20 mm; 21.3 mm; 21.8 mm; 25 mm; 25.4 mm; 26.9 mm; 28 mm; 30 mm; 31 mm; 32 mm; 33.7 mm; 35 mm; 36.8 mm; 38 mm; 38.4 m ...

Drawing line Composed of Lifting platform INDEVA LIFTRONIC Jib Crane 40 kg with Scale Reel handling unit Drawing machine SAMPSISTEMI MT 106 6A year 2012 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Manual gearbox only, ideal for DIN 250, DIN 355 and P15, can also be used with DIN 160, DIN200, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-641

Drawing line Composed of Lifting platform with scale Reel handling unit SAMPSISTEMI TE/25-A drawing machine year 2003 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-638

Machinery can be retired from the second half of January 2026 Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-636

Drawing line Composed of Lifting platform with scale SAMPSISTEMI BD 250 A reel handling unit Drawing machine SAMPSISTEMI RC 150 / MT 160 6A year 2017 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-649

Composed of an entrance made up of a series of motorized belts with a width: 90 mm, by BLINKMACHINES. This is followed by BLINK MACHINES brand thermo sealing packaging machine model BKY1, year 2018, weighing 1500 kg. Power: 15 kW. This is followed by a BLINK MACHINES brand oven, model BKS200, year 2018, weighing 500 kg and powering 15 kW. Then a motorized roller conveyor begins: about 550 mm wide. The line continues with a COMARME brand taping machine, model GEM X520, year 2018, weight 250 kg. Working dimensions: 550 × 500 mm. Followed by a strapping machine with a mouth of dimensions: 520 × 500 mm. This is followed by the LABEL ENGINEERING labeller and a series of 500 mm wide motorized rollers and belts. It concludes with a EUROPACK manipulator arm, model WINNER 250, year 2013, capacity: 25 kg, total weight: 2000 kg. including protective barriers. Including INDEVA suspen ...

Machinery can be retired from the second half of January 2026 Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-635

Drawing line Composed of Lifting platform with scale Reel handling unit SAMPSISTEMI MC/16-6A drawing machine year 2002 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN160 Manual gearbox DIN125, P5 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-647

FICEP – CNC Drilling and Plasma Cutting Line General data: Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Technical details: Maximum workpiece width: 3100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1900 mm Maximum workpiece length: 6400 mm Maximum thickness: 130 mm Maximum drilling diameter: 40 mm Maximum workpiece weight: 7500 kg Spindle speed: 180 – 3000 rpm Minimum workpiece dimensions: 200 x 150 mm Equipment: Plasma generator: Hypertherm HPR260 Includes input and output conveyor lines with gripper; Input conveyor length: approx. 8 m; Output conveyor length: approx. 5 m; Wide conveyor for scrap removal Description: CNC drilling and plasma cutting line from FICEP, designed for processing large steel workpieces. The machine combines drilling and plasma cutting capabilities, making it suitable for heavy-duty industr ...

Machinery can be retired from the second half of January 2026 Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-637

Drawing line Composed of Reel handling unit Module 1 Drawing machine SAMPSISTEMI TE/40-MA year 2019 Module 2 Drawing machine SAMPSISTEMI MT 250 4A year 2009 Including wire drawing machine, furnace and winding machine Maximum input material diameter 3.0 mm Minimum output material diameter 1.5 mm Ideal for large reels (800-900 kg) Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-666

Drawing line Composed of Lifting platform with scale Reel handling unit SAMPSISTEMI TE/25-A drawing machine year 2007 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic change of coils DIN 160 and DIN200 Manual gearbox DIN125, DIN250, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-639

Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-634

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT • Entry guide • Feeding rolls • 7 Straightening rolls • Encoder • Shear • Variable speed of 0 to 20 mts/min OPTIONS • Film plastic device • Motorised entry guide • Hydraulic entry table • Hydraulic dauble entry table • Stackers 2, 3, 4, 6 meters. MATERIAL TO BE PROCESSED: WIDTH TO PROCESS: THICKNESS (R=450NW/MM2) PRODUCTION SPEED: CUTTING ACCURACY: COIL LOADING CAPACITY: Steel 420 Nw/mm2 Steel 700 Nw/mm2 Aluminium 200 Nw/mm2 750, 1000, 1250, 1500 mm from0`5 to 1`5 - 2`0 - 3`0 - 4`0 mm up to 20 m/min +/? 0`5 mm 4,6,10,15 to If you are interested, please send us your enquiry with the following details: - Coil weight - Coil width - Coil inner and outer diameter - type of material - Material thickness - Number of slitting lines (only for slitting and cut-to-length lines) - Material to be processed in tonne ...

- 3.0 diesel engine//262 HP - EURO 6 - Key Less Entry (Locks/unlocks with the key in your pocket) - Key Less Go (Starts with the button) - Suspension on cushions (adjustable) - Rims//R20 with winter tires - Tow hook - Distronic (maintains speed and distance depending on the car in front) - BiXenon headlights//turns in curves//led daytime running lights (DRL) - Led taillights - Mirror indicators - Electric folding mirrors/with memory/heated - Heliomatized rearview mirror and exterior mirrors - Cruise control - Hill descent assist - Front, rear parking sensors//back camera - DISTRONIC (Maintains distance from the car in front) functional! -SIDE ASISST (Blind Spot Assist) -Line Assist (Maintains single lane) - Rain sensor - Light sensor - Autohold - Start/stop - Ambient interior/exterior lights - 4 x Lockable electric windows - Electric trunk with softclose - R-line steering wheel//adjustab ...

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Chansard Alcoomatic II Alcohol Measuring Installation. In used condition. Chansard Fermentation – Alcoomatic II, automatic industrial alcohol measuring installation. Equipped with vertical stainless steel distillation column and integrated electronics for continuous or batch determination of the alcohol percentage by volume (%Vol). The installation works on the basis of distillation followed by automatic alcohol analysis. Suitable for applications in fermentation, brewery, wine and distillation processes. Technical features • Model: Alcoomatic II • Brand: Chansard Fermentation (France) • Operation: Automatic distillation + alcohol measurement • Version: Vertical stainless steel column on robust frame • Measuring principle: Separation of alcohol by heating, then automatic analysis • Application: Analysis of alcohol content in liquids such as beer, wi ...

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

COMIL automatic packaging line• Year : 1991 • Complete packaging line with motorized conveyors, shrink oven and loading area• Robust steel structure with three-phase power supply• Adaptable to different product formats• Synchronized conveyors for continuous throughput• Integrated control cabinet• Estimated weight: approx. 3500 kg Auction-ID: A1-45443-52

Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...

Machine: MASTERWOOD door production line DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: L max. 2500 mm, max. W 1300 mm, h max. 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: EC Auction-ID: A1-45443-37

HAMER UNI-1000 automatic thermoforming, filling and sealing machine, designed for single-dose packaging (liquid products such as oil, cosmetics, etc.). Key features: Pressure and vacuum thermoforming Contact heating system Heat sealing station 3-head dosing system Die-cutting and cross-cutting system Scrap ejection system Integrated marking system Touch Screen Control (Delta HMI – GP-477R) Technical data: Brand: HAMER Model No.: UNI-1000 Serial number: A-10535 Suitable for the production of single-dose containers in the food, cosmetic or pharmaceutical sectors. Compatible with food-grade materials such as PVC/EVOH/PE films. Approximate dimensions: Length: 4,000 mm Width: 1,500 mm Height: 2,000 mm Approximate weight: 2,000 kg Installed in a clean production environment. Possibility of on-site inspection. Auction-ID: A7-44864-5

Adjustable feed station with 5 rollers (1500x600x250) Working width 1200 mm. 22 rolling stations with double horizontal axes. Adjustable guides. Precision bearings per station. Cardan driven rollers Hydraulic power unit (1520x1400x800 mm) with Tatung 22 kW FBDP-HD drive. Hydraulic cutting unit with double punch equipped with Leedan LDSM230D-II 15 kW servo motor. Equipped with hydraulic decoiler (2500x1400x2000 mm, capacity 5000 kg. Including roller conveyor (3000x1020x760 mm) Auction-ID: A1-41991-1

Equipped with: electric windows, electric adjustable seats, cruise control, heated seats, panoramic roof, windscreen wipers, lighting, spare tire, airbag Auction-ID: A1-42012-177

With filter system ESB type AA 600 Compressed air protection class: IP54 Vibrating motor: 2 x 0.75 kW Fan motor: 2.2k W Total connected load: 6 kW Filter area: 2 X 72 m² Number of cartridges: 2 X 4 Extraction capacity: 6000 m³/h Air pressure maximum.8 bar Cleaning pressure: 7 bar, Including: 2 x ZA 02 lifting device, 8 Automatic powder gun type PG 2-AX, ESB control cabinet type 60191, Make number 600 Auction-ID: A1-45447-2

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-44765-212

Adjustable feed station with 5 rollers (900x700x360) Working width 630 mm. 12 rolling stations with double horizontal axes. Adjustable guides. Precision bearings per station. Hydraulic power unit (1000x600x1100 mm) with 4 kW drive. Hydraulic cutting unit. 20 kVA Cheng Hsuan transformer. Equipped with decoiler (1300x700x1100 mm) Including roller conveyor (3000x1020x760 mm) Auction-ID: A1-41991-4

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery  Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors

Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functio ...

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

consisting of: automatic glass retraction, Fabr. HEGLA, Type: ISO, Ser No. 2033401055, glass washing and drying station, Fabr. LISEC, Type: VHW-F29/V8, YOC 2022, Ser-No. 315117/944, Glass transport station, Fabr. LISEC, Type: RTVB1527MZU2, Year 2019, Ser No. 383109341, visiting station, Fabr. LISEC, Type: RSV-38/27B, Year 2019, Ser No. 320-109338, Press Unit, Fabr. LISEC, Type: FPS-35/27U2, Year 2019, Ser-No. 343-109342, Frame Conveyor, Fabr. LISEC, Type: FR-400H, Year 2019, Ser-No. 550-109339, Dam system with sealing system, Fabr. LISEC, Type: VSL-10-27, Ser-No. 100170 with 2 stowage sections, dead weight: 4500 kg, as well as separate control/control cabinet system with cooling system, Fabr. RITTAL, control unit, dosing unit, pump and valve technology, max. working height of the system: 2700 mm

consisting of: 8 large shelves, Fabr. HEGLA, type: FLB, load capacity: 40,000 kg each, for lengths up to: 6,000 mm, tilting table/glass support, Fabr. HEGLA/HAGER, year 1988, Ser no. 0880342, Floatglasschneid- u. Brechtisch, Fabr. HEGLA, cutting bridge, Fabr. HEGLA, type: OPTIMAX 6032ES, built in 1996, Ser no. 6079, Net weight: 6,500 kg, Storage table, Table surface: approx. 3200x6000 mm, with operating terminal, PC tower, monitoring monitor, lattice enclosure and light barrier system

consisting of: tilting table, Fabr. HEGLA, type: ART6032, built in 2005, Ser no. E7662, net weight: 3,900 kg, surface layer unit, cutting table with cutting bridge, Fabr. HEGLA, type: VSG A46-MT, year 2003, Ser-No. 2118, footprint: approx. 3200x7000 mm, dead weight: 11,000 kg, max. working pressure: 6 bar, with control unit, lattice housing and light barrier system

Circulation Coin Saxony Albertine Line 4 Pfenninge 1809H AKS47

✨Pfaff Hobbymatic 905✨ Sewing Machine, Cotton Linen Jeans Leather Auction-ID: A7-45427-157

Unaudited Good condition Auction-ID: A7-45427-210