We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,311 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Inv. Num. : 7175 Type: DECO-2000/13 Producer: Tornos Created: 2001 Parameters: Control system: FANUC PNC DECO Max. rod diameter: 13 mm Number of synchronized axes: 10 pieces Maximum spindle speed: 10,000 1/min Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: 3000 kg Equipment: Robobar SSF 226 Bar Feeder (2000)
used
Inv. Num. : 7174 Type: DECO-2000/10 Producer: Tornos Created: 2001 Parameters: Control system: FANUC PNC DECO Max. rod diameter: 10 mm Maximum bar length: 2000 mm Maximum turning length: 180 mm Maximum turning diameter over bed: 200 mm Maximum spindle speed: 12000 1/min Length: 2000 mm Width: 1010 mm Height: 1950 mm Weight: 1500 kg Equipment: Robobar SSF 226 Bar Feeder (2000)
used
Snb 400x1500p
used
Proxxon Micromot PD 400 Precision Lathe 550 W Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.
used
:::SPECIFICATIONS::: CNC Model: Fagor CNC Version: 8050 TC Spindle nose: ASA 11 Spindle power: 30Kw Bench drill height: 450mm Turning diameter on bench: 920mm Turning diameter on the undercarriage: 550mm Turning length: 3000mm Number of laps: 1500 Bar clearance: 130mm Mechanical gearbox: yes Number of ranges : 2 Weight between tips: 7800Kg Turret: Manual Number of Tool Turrets: 1 Number of fixed tool positions for the first turret: 1 First Turret X-Axis Travel: 550mm Tailstock: Yes Steerer stroke: 400mm Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 5350mm Width: 2650mm Height: 2000mm Weight: 7800Kg
used
Parallel Lathe MULLER & PESANT Between points: 1000 mm Maxi Ø on bench: 400 mm Maxi Ø over saddle: 220 mm Spindle exit: Ø 42 mm Spindle speed: from 40 to 2000 RPM Square turret 3-jaws chuck Ø 215 mm 2 speeds motor Threadings: Metric + Whitworth Tailstock: CM4 Autp Feeds longitudinal + transversal Delivered with 3 Tool holders Fixed steady Lubricant pump Voltage: 220 V Tri Length: 2300 mm Depth: 900 mm Total height: 1300 mm Weight: approx 1,7 T
used
Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T
used
Key data: 580 mm, 1000 mm, 400 mm
L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...
used
We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also ...
used
Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE CONTROLLER (SIMATIC PANEL TOUCH SCREEN) Year of construction: 2001 Spindle bore: 52 mm Center width: 750 mm Circulation O above bed : 320 mm Circulation O over face slide: 150 mm Flat travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck 0 200 mm Tailstock with retractable quill Chip pan Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN VERY GOOD CONDITION
used
Key data: 820 mm, 2000 mm, 515 mm
We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...
used
Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.
used
Pinacho S90-310 lathe. Distance between centers: 1.625mm. Swing: 620mm. Swing over carriage: 425mm. Swing in gap: 880mm. Bore: 80mm. 12 speeds: 30-1500rpm. Motor power: 7,5cv. Equipped with chuck. Equipped with DRO Heidenhain. CE.
used
Lathe Böhringer VDF with programmable cycles Type DUS 560 Machine No. 1022.3073-03 Built in 1993 Center width 2000 mm Connected load 19 kW Working Range/Dimensions Circulation diameter over bed 570 mm Circulation diameter via face slide 365 mm Sliding distance of the face slide 345 mm Displacement of the upper support 125 mm Center height over flat track 280 mm Bed width 360 mm Bed carriage guide length 520 mm Slide width 225 mm Slide length 680 mm Upper support width 140 mm Turning bit cross-section according to DIN 770 hxw 32x25 mm Main spindle Spindle head according to DIN 55 027 size 8 Spindle diameter in front bearing diameter 100 mm Spindle bore diameter 62 mm Inner cone of the main spindle 70 metr. Main drive Infinitely variable three-phase motor (AC motor) Drive power 60 % / 100 % ED 19/15 kW Torque 60 % / 100 % ED 1800/1400 Nm Total speed range ...
used
Key data: 460 mm, 400 mm, 460 mm
Control: Fanuc 32 iTB - Turning length: 400 mm - Turning diameter: 460 mm - Circulation diameter over carriage 460 mm - Tool holder directly - Tool turret with 12 positions Equipment - Rear chip conveyor with double chain - Electronic handwheel - High pressure coolant pump (6 bar 55l/min) - High pressure coolant pump (15 bar 55l/min) - 3- Jaws power chuck in main spindle - Hydraulic hollow clamping cylinder - Special gantry enclosure - GL6 – 2 axle CNC gantry loader with a Capacity of 2 x3 KG (Travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets, each with 13 auto-centering support rods
used
Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos
used
Key data: 1250 mm, 1400 mm, 1150 mm
Digital Workpiece weight 8 t Crossbar adjustment 800 mm Chisel travel 700 mm Swivel angle max. 45 +/- degrees Special equipment: wet turning device, Fine-tuning chisel device, incl. accessories Machine weight approx. 13.5 t Space requirement approx. 3.4 x 5.8 x 4.5 m
used
Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.
used
Key data: 280 mm
Year of construction 2015 Center height: 165 mm Center width: 650 mm Turning diameter over bed: 280 mm Face slide: 180 mm Spindle speed: 30 - 4000 rpm (infinitely variable) Spindle bore: 43 mm Feeds: 0.025 - 0.9 mm/rev Thread pitch: 0.2 - 7 mm Spindle head DIN 55027: Size 5 Bed sledge travel: 610 mm Sledge travel: 165 mm Upper slide travel: 115 mm Inner cone tailstock quill DIN 228: MK3 Quill stroke: 82 mm Dimensions: 1600 x 860 x 1450 mm Weight: 1000 kg Total power requirement: 18kVA Accessories: 3-jaw chuck, Multifix quick-change steel bracket with cassettes, bezel, coolant device, lighting, chip protection
used
Key data: 250 mm, 1000 mm, 380 mm
Hamlet of Commodor AC (Constant cutting speed) Year of construction 2004 Machine no. 3634 Circumferential diameter over bed 380mm Circulation diameter over face carriage 190mm Nominal power 5.5kW Spindle speeds 13-2000 rpm Spindle passage 56mm Center width 1000mm Tailstock MK4 Feed force 10kN Accessories/Equipment: - Three-jaw lathe chuck 200mm - Swivel jaws stepped inside and outside - Multifix B base holder incl. 2 tool holders - Coolant device - 3 axis digital display (hamlet) - Constant cutting speed -Operating instructions - Fixed and rotating bezel - Electrically locked chuck guard - Emergency stop - Multiple bed stops The machine has been technically tested and is in very good condition. The geometry was also checked and found to be very good (measured by the flat web layout) Reversal clearance face carriage 0.15mm Backlash upper slid ...
used
Key data: 420 mm, 1500 mm, 210 mm
well-preserved, used lathe Ramo a42 Built in 1987 Rapid traverse for longitudinal and flat Foot brake Circumferential diameter over bed 420 mm Center width 1500 mm Speed range 25-2000 rpm Center height 120 mm Spindle bore 80 mm Quick-change bracket Multifix Coolant device with chip tray Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de
used
Combined copying milling machine - lathe MICHAeL KAeMPF -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Year of construction 2008 Control system Siemens 840 D Rotational diameter. [mm] 2400 Turning length [mm] 2145 General: Year of construction 2008 Control system Siemens 840 D Turning diameter 2,400 mm Rotation height 2,145 mm (stand elevation 900 mm) Machine Table: Technology gear table, 2 stages Drive power 100 kW Torque 39,700 Nm Holding torque milling operation 44,800 Nm Speed 250 rpm Face plate diameter 2,200 mm Table load max. 17,000 kg C-axis 0.001° Drilling and milling equipment: Technology Gear Spindle Speed max. 3,000 rpm Power 37 kW Torque 1,230 Nm Tool holder Capto C8 Crossbar: Vertical travel 1,000 mm Grid spacing 100 mm Distance between milling spindle and table 2,350 mm Support: Travel X-axis +/- 1,350 mm Z-axis travel 1,500 mm Chisel slide cross-section 250 x 250 mm Immersion diameter 340 mm Rotate tool holder Capto C6 Tool Hold ...
used
CNC Vertical Lathe BERTHIEZ TFM 125 Numerical Command: NUM 1040 Maxi turning diameter: Ø 1550 mm Turning height: 1000 mm Vertical run of the slide: 800 mm Max turning height under crossbar: 1280 mm 2 speed ranges: 1 to 125 RPM - 1.6 to 200 RPM 4-jaws chuck Ø 1250 mm False platform diameter: Ø 1500 mm Maxi permissible weight on chuck: 10 T Motor: 22 kW Horizontal travel at right of chuck: 895 mm Horizontal travel at left of chuck: 935 mm Left coolant section: 180 x 180 mm Tool changer: non-functional Chip Conveyor Voltage: 380 V Weight: approx 20 T
used
Year of construction: 2015 Condition: very good (used) X-axis travel: 925 mm Y-axis travel: 1,050 mm Z-axis travel: 600 mm Spindle speed (max.): 8,000 revolutions per minute Spindle speed (min.): 25 revolutions per minute Motor power: 2,200 W Total height: 3,525 cm Total length: 4,850 cm Total width: 2,998 cm Workpiece weight (max.): 700 kg Table load: 700 kg Input Current Type: AC Table width: 630 mm Tool length: 400 mm Total weight: 175,000 kg Coolant supply: 70 bar Equipment: Documentation/manual, infinitely variable speed Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe bo ...
used
Key data: 560 mm, 1200 mm, 380 mm
Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m
used
Tornos Multiswiss 8x26, Year of construction 2018, Control Tornos, 1 x counter spindle, 4 x reverse machining, Parts tape, 2 x 80 bar high-pressure pumps, fire extinguishing system, Bkhjrdnfq8o hinged belt conveyors, Bar feeders, paper tape filters,
used
Key data: 1000 mm, 2000 mm, 800 mm
Heavy Lathe, Lathe, Lathe, Lead and Pull Screw Lathe, Lead and Pull Spindle Lathe -Manufacturer: Arad M.I.C.M., Type SN800x2000 -Turning length: 2000 mm -Swivel Ø over bed: 800 mm -Swivel Ø without bed: 1000 mm -Swivel Ø over support: 400 mm -Spindle bore: Ø 83 mm -Spindle speeds: 8 - 1250 rpm -Three-jaw chuck: Ø 400 mm -Quick change: Multifix steel bracket -Tailstock mount: MK5 -Drive motor: 18.5 kW -Dimensions: 4000/1450/H1430 mm -Weight: 4500 kg The machine can be viewed at any time. Free loading. Transport possible throughout Europe
used
Lead & Pull Screw Lathe TOS SV 18 RA Year of construction approx. 1980 The machine is in good used condition and works perfectly. Transport or delivery can be arranged. Of course, loading technology is available at the time of collection. Specifications: Center height 180 mm Circumferential diameter over bed 380 mm Circulation diameter over support 215 mm Center width 1000 mm Spindle bore 41 mm Speed range 14 - 2800 rpm. Longitudinal feeds 0.02 - 5.6 mm/rev Feeds flat 0.01 - 2.8 mm/rev metric pitches 0.2 - 140 Inch thread 1/5 - 140/1" DP thread 1 - 224 DF Module thread 0.2 - 70 m Drive power 6.0 kW Dimensions approx. 2200 x 1000 x 1400 mm Weight approx. 1800 kg with -Arbor - Three-jaw lathe chuck - Moving grain tip The machine can be viewed at any time.
used
CNC Vertical Lathe Make: Hüller Hille Type: VDM 120 – 11 Year of construction: 2002 Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg
used
Control Mazatrol Fusion 640 TN Turning diameter 180 mm Turning length 100 mm Travel X/Z 320 +560 / 280 mm Speed 7000 min-1 12-speed turret Conveyor Accessories:
used
- Digital display Heidenhain - Accessories available Center height 200 mm Center width 1000 mm Turning diameter over carriage/bed 240/425 mm Length of crank from the plank with 4 jaws 180 mm Spindle bore 51 mm Inner cone 60 metric Recording Camlock D6" Speed 45-2240 rpm Lead screw pitch 6 mm Tailstock quill holder MK 4 Diameter of tailstock quill 70 mm Quilles: stroke 200 mm Feeds: Longitudinal 0.05-2.8 mm/rev Flat 0.05-2.8 mm/rev Rapid traverses: Longitudinal Thread pitches: Metric 0.5-14 mm English 2-56 U/1" Module 0.125-3.5 Motor 380 volts, power 12.5 hp Machine dimensions: W x D x H 2400 x 1200 x 1800 mm Weight 2100 kg
used
Center height 225 mm Center width 1000 mm Spindle bore 42 mm
used
Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.
used
Gebr. CNC Long Short Turning/Milling Center with B-Axis Hours: 7200 Control: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear beams: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2.110x1.200x1.885 Weight: 3,300 kg Conversion from long to short turning Deep Hole Drilling Stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross Drilling Rear Conveyor Fire extinguishing system FMB bar feeder Minimag 20, YOC 2012 The machine can be viewed under power by arrangement. Subject to changes and errors in the technical data and ...
used
Inv. Num. : 7432 Type: SW 32 Producer: Goodway Created: 2017 Parameters: Side length: 315 mm Max. turning diameter: 32 mm Weight: 3200 kg
used
Key data: 178 mm, 485 mm, 100 mm
Turning length: 485 mm Rotation diameter: 178 mm above bed / 100 mm over cross slide Spindle Passage: 15.5 mm Spindle speeds: 25 - 2,150 rpm. Tool Container: Tripan Container Equipped with: - Rohm 3-jaw chuck with different jaws - Zahrade Set - Collet set -Operating instructions Country of origin: UK Machine LxWxH: 1180 x 700 x 1200 mm Machine weight: 170 kg
used
Key data: 380 mm, 1200 mm
Turning length: 1200 mm Rotation diameter: 380 mm above bed Spindle Passage: 50 mm Spindle speeds: 35 - 1,500 rpm. Equipped with: - 3-jaw chuck with different jaws - Steel tank Country of origin: UK Machine LxWxH: 2500 x 950 x 1200 mm Machine weight: 1200 kg
used
Key data: 500 mm, 3000 mm, 300 mm
Turning length: 3000 mm Rotation diameter: 500 mm above bed / 300 mm over cross slide Spindle Passage: 72 mm Spindle speeds: 11 - 1134 rpm. Tool container: Multifix Type C Equipped with: - Fixed bezel - Digital reading Acurite - Rapid traverse - Ball rotating apparatus - Miscellaneous accessories -Operating instructions Country of origin: Germany Motor power: 8 kW Machine LxWxH: 450 x 140 x 150 cm Machine weight: 4000 kg
used
Control: OSP-P200L Max. turning diameter 1000 mm Table diameter Ø 800 mm Displacement Horizontal 900 mm Tool turret 12 places Equipment: -Conveyor - Lots of tools -Water tank -Pedestal
used
Description: Consisting of 3 horizontal spindles and a counterholder weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm
used
GENERAL Project No.: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of construction: 2018 Condition: Used machine Program run approx. (hrs.): 28,500 DESCRIPTION TURN Max. turning diameter 210 mm Max. turning length 100 mm Max. circulation diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at ED 10-40/100% 25/16 kW Max. torque main spindle at ED 10-40/100% 200 Nm Spindle diameter in the front bearing main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z Main spindle unit 400/-/200 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 60/-/30 m/min Feed force in X/Y/Z Main spindle unit 5000/-/5000 N Direct Displacement Measuring System Main Spindle Unit X/Z Full-clamping cylinder on the main spindle Rev ...
used
Key data: 355 mm, 1600 mm, 355 mm
Manufacturer | Manufacturer: WMW Type | Type: DLZ 355 x 1600 Stock number | Stock Number: 1009 Turning Length | Turning length: 1600 mm Circumferential diameter over bed | Swing diameter over bed: 355 mm Spindle bore | Spindle bore: 35 mm Tip Height | Center height: 180 mm RPM | turning speed: 112 - 2500 rpm Engine Power | Drive power: 5.5 kW Weight Machine | Weight of machine: 2,2 t
used
Key data: 400 mm, 1500 mm, 400 mm
Manufacturer | Manufacturer: Wafum Type | Type: TUD 40 x 1500 Stock number | Stock Number: 1011 Turning Length | Turning length: 1500 mm Circumferential diameter over bed | Swing diameter over bed: 400 mm Spindle bore | Spindle bore: 56 mm 21 working spindle speeds | 21 speeds: 18..1800 rpm Connected load | connected power: 7.35 kW Weight of the machine | Weight of machine: approx. 2.8 t
used
Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor
used
with CNC control, Fabr. SIEMENS, type: SINUMERIK 840D POWERLINE, turret with 12 tool positions, max. speed: 4000 rpm, number of axes: 3, max. circulation diameter: 300 mm, max. turning diameter: 300 mm, max. turning length: 300 mm, with a workpiece loading system, Fabr. EWAB
used
Tool turret with 12 tool positions, with driven tools, bar machining up to 65 mm diameter, chuck processing up to: 250 mm, max. 6000 rpm, control type: TX8F, optical tool measurement, with bar loading magazine, Fabr. LNS, type: QUICK-LOAD SERVO, with material feeder, filter system, Fabr. RUEZ & Chip Conveyors
used
Chuck, Multifix, 15KW, Mas. No. 07351501
new
Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 1950 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.
used
Tool quick coupler used and new, different sizes Partly Multifix, C , B , A, E, ... Can also offer them new ones. Assembly on request or self-assembly !