manual lathe machine used for sale

Manual static postformer Min/Max. workpiece length 1600 / 3100 mm. Profile height max.150 mm. Workpiece thickness min. 16 mm. Working height 950 mm. DOCUMENTATION AVAILABLE

Key data: 40 t

Specifications: Compressive force 40 tons max. achievable compressive force 50 tons Table size W x D approx. 650 x 550 mm Passage between uprights 650 mm Diarrhea hole 150 mm Plunger 580 x 250 mm

Description: HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION Approx. Onsite Dimension. (l x w x h): 700 x 500 x 500 mm, weight approx.: 30 kg

Manueller Blockhefter - Manual Stapler Nagel ENAK 50 Serial-No. 6017 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Manual Stapler Nagel enak Serial-No. 50/6-50/20B Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m

manueller Deckenherstellung - manual Casemaker Schmedt PraeDeck Year 05-1986 - Serial-Nr. 246 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhoehe / Lift high max. 1600mm Gabel Laenge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Hand screw press - type "NEHER" -Good used condition Dimensions: LxWxH 1.4x1.2x2.3Meter Weight 850Kg Wckq0zxa

Description: Internal dimensions approx. 1200 x 800 x 700 Machine number 3214 Including large lot of blasting material, protective screens Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,200 mm, weight approx.: 500 kg

Key data: 8 t, 420 mm, 120 mm

Machine Type: Hand Spindle Press Manufacturer: SCHULER Condition: good Offer Type: Used Machine Specifications: Compressive force: 8 t Projection: 120 mm Table: 420 x 235 mm Installation height: 175 mm Weight: 250 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Description: Serial number: 2658 With electrode pliers, mobile device weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 500 x 900 mm

Key data: 20 t

Article code: 13-13-023 Manufacturer: Neher Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1600x1600x2300mm Weight: approx. 1200kg Max. pressing force: approx. 20 tons Wheel Diameter: ca.1600mm Working stroke: approx. 300mm Other accessories on request Price and other technical data on request

Key data: 20 t, 420 mm

Article number: 13-13-024 Manufacturer: Reyer Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1200x800x2000mm Weight: approx. 400kg Max. pressing force: approx. 20 tons Table surface: approx. 420x530mm Other accessories on request Price and other technical data on request

Description: - hand lift cylinder with different inserts - one hydraulic cylinder pressing force: 10 to - one hydraulic cylinder pressing force: 0.5 to - with extensions Approx. Onsite Dimension. (l x w x h): 660 x 350 x 160 mm, weight approx.: 20 kg

Description: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 530 x 400 x 750 mm, weight approx.: 82 kg

Description: stroke 70 mm Approx. Onsite Dimension. (l x w x h): 200 x 300 x 700 mm, weight approx.: 30 kg

Description: maximum lifting height 1600 mm, capacity 800 kg Approx. Onsite Dimension. (l x w x h): 1,600 x 700 x 2,000 mm, weight approx.: 235 kg

Description: jaw width 80 mm , length 100 mm Approx. Onsite Dimension. (l x w x h): 280 x 70 x 130 mm, weight approx.: 5 kg

Olland manual slicer, dimensions: 700 mm x 800 mm x 1500 mm.

Description: table dimensions approx. 315x215 Approx. Onsite Dimension. (l x w x h): 1,000 x 960 x 2,160 mm, weight approx.: 300 kg

weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 260 x 1,200 mm

Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg

Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg

Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg

Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg

Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg

Description: Manual tools + TRACTEL 2 Boxes TRACTEL Blocfor Approx. Onsite Dimension. (l x w x h): 900 x 500 x 300 mm, weight approx.: 10 kg

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Max. basket weight:200 kg No. of washing chambers:1 No. Of tanks for washing:1 Small parts - cleaning system BOUS "CeBeCo" SECURUS "D" size 2 "S" from workshop, hardly any operating hours, 1A-TOP-CONDITION Usable dimensions: approx. 800 mm diameter Useful height: approx. 450 mm Operating weight: max. 200 kg with evenly distributed load Nozzles: flat jet Pump: approx. 3 kW 2x heating: approx. 2x 6 kW Thermostat: digital Insulation: Terodem heat insulation Detergent filling capacity: approx. 200 l Power requirement for fan: approx. 0.25 kW Power requirement for drive: approx. 0.12 kW Power requirement for emptying pump: approx. 0.6 kW Voltage: 230/400 V, 50 Hz PE/N Control voltage: 24 V Loading height: approx. 900 mm Labelling: German 1. VAPOUR EXTRACTION The unit is equipped with a vapour extractor, consisting of an electric low-pressure fan with intake connection. The scope of delivery  ...

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Universal riener, double riening machine, brake coating riener e.g. for rivets of couplings or brake belhighs Adjustable distance Ideal for faithful restoration and maintenance of classic cars Rest according to photos Special price

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m