manual lathe machine used for sale

Power: 1.3Kw Grinding wheel size approx. 225mm Dimensions of clamping magnet: 350x180mm with suction device

Equipped with ground cable and welding pliers

Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 30

Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5)

Hobbing machine Manufacturer: Liebherr Type S600

Flame separating machine Manufacturer: Kjellberg

Mobile semi-automatic taping machine which seals fixed-format boxes with adhesive tape (upper and lower parts). Output: 1000 boxes/h.

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts

Sell a TBT quill block, Condition new. Pinol block has never been installed. Original price is 30.800,00 Euro net. .VB

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

incl. welding hose and earthing Reference: Schiller - Lot 4

Height gauge (0 - 600 mm) + counter holder including wooden transport container

Table dimensions: 630 x 150 mm incl. clamped vice, jaw width: approx. 110 mm

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Sell a Thissen telescope. new Never been installed. For a 30NC-244.384, Ident No. 20761, Art.Nr.: A2976001, .VB

Norpak Rover150 label applicator label applicator, variable speed head, max label width 110mm, with food pedal, 1Ph

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

Tables can be adjusted at an angle.

Consisting of various rotary tables, dividing heads and a magnetic clamping plate suitable for DECKEL milling machines Reference: Hüpometall - Lot 26 Weight: approx. 300kg

Year of construction: approx. 1981 Accessories: - Universal milling head, tangential milling head, - Interchangeable wheels - 2 cutting equipment, - little used

Serial number: 1061 Electrode force: from 15 to 110 kP

Trumpf TRUBEND 5085 - WORKING INSIDE PRODUCTION WORKING HORS: PRESENT ON PHOTO OF SCREEN Year 2011 Compression force: 85 tonnes Table length: 2,200 mm Free travel speed: 220 mm/s Accessories: Increased lift height from 230 mm to 615 mm. 5-axis bending. Hydraulic tool clamping at the bottom. Hydraulic tool clamping at top. Automatic bombing. Bendguard guard ACB angle measurement FOR CLIENT WE ORGANIZE AS WELL DISMANTLING AND TRANSPORT

Equipped with fuse; 3 Allen keys; carrier strap; 3 handles; Drilling capacity: 35 mm; Drilling depth: 210 mm; Speed: Up to 830 rpm; Adhesion: 16000 N; Power: 1600 kW; Connection: 230 V; Automatic cooling system; Unused in box

510 J type - equipped with Iemca MiniBoss 325/37 new in 1996 - tool eye - accessories - Fanuc 18-TB Control

Kneading machine Boku Type: AK 240 Year of construction: 1996 / 2004 Dough quantity: 240 kg additional 2 boilers Manual control 2 speed automatic Mechanical boiler locking Weight: 0.7 t per kneader Condition: from service, electrics and mechanics contra.

Included: accessories spare blade, as well as adjustable stop on the right and left

Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg

Equipped with Digital depth gauge and work light

Extraction system KAPPA, type: MYKRON M 16 Serial number: 00M16.0055 Year of construction: 2000 Motor power: 15 kW Speed: 3000 rpm Working dimensions: Width: 2.00 m, Length: 3.5 m Control: Control type: NBS 300 Production number: 1513 Voltage: 230 V Frequency: 50 Hz Connection: 330 VA Reference: Plasma cutting - Falkenberg

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5)

Spiral mixers with 2 speeds and 2 digital timers that automatically control the switching of speeds from mixing to kneading. Controls located at the front. Closed protective hood. Mobile. Dough holder for 2 - 25 kg dough, bowl capacity 45 liters W x D x H: 570 x 890 x 1190 mm Power: 400 V / 50 Hz / 1.9 kW Condition: as new, very little used.

Setter machine autonomous for pastry line Belt width 800 mm Settling length adjustable without substructure for sheet metal Condition very good, new settling belt

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): No; Maximum cutting thickness 45mm; Unused in box

Industrial surface grinding machine for machining flat surfaces. Equipped with NC control, magnetic table and sprinkler system with tray and filtration.

Machine number: 32099/90 BE Drive power: 8.5 kW Electrical connection: 380 V, 50 Hz for deburring various elongated components Lengths from 200 mm to approx. 900 mm (without guarantee) incl. extraction

Pipe grinding machine with 11 grinding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170 mm Tube clamping area 170mm Documentation (English) Belt width 200 mm Belt length 1600 mm Pipe diameter 38 - 170 mm Connection voltage 400 V Total power requirement 3.0 kW Machine weight approx. 0.25 t Space requirement approx. 1.4 x 0.8 x 1.35 m Condition: never used / new (5)

Gebrauchte; 120l,; 1991; für schwere Kuchen - effizient. Für weitere Informationen kontaktieren Sie mich bitte. 3 Kessel enthalten

Wire stitching machine Hohner Economy 25/40; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with folded clamp, 40mm with unfolded clamp; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.

CNC Wire EDM Machine Charmilles Robofil 310 Travel X: 400 mm Travel Y: 250 mm Travel Z: 400 mm Max. workpiece weight: 500 kg Electrical connection: 380 V Machine weight: 2500 kg Dimension length: 1800 mm Dimension width: 1600 mm Dimension height: 2230 mm Max. workpiece size: 850 × 500 × 400 mm Travel U/V: 400 / 250 mm

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German