manual filling used for sale

Lot of APTECH manual high-pressure valves/valves (10x AP1001SM & 2x AP1206SM) Auction-ID: A1-48529-195

Technical details Type: Manual plate rolling machine Configuration: - Three-roll slip roller - Adjustable top roll - Manual hand crank drive - External spur gear transmission - Manual roll adjustment screws Application: - Rolling sheet metal into cylinders - Cone forming - Mild steel fabrication - Stainless steel fabrication - Aluminium sheet rolling - General sheet metal work Construction: - Heavy-duty welded steel frame - Manual geared operation - Three hardened steel rolls Working width: Approx. 1200 mm Roll diameter: Approx. 70–90 mm Dimensions: - Length: Approx. 1500 mm - Width: Approx. 600 mm - Height: Approx. 1200 mm Weight: Approx. 250 kg Condition: Used Observed condition: - Machine appears complete - All three rolls installed - Gear transmission intact - Hand crank fitted - Roll adjustment screws present - Surface corrosion and paint wear vis ...

Batch of used APTECH manual vacuum valves (11x AP1001SM & 1x AP1206SM) Auction-ID: A1-48529-194

Conventional surface grinding machine with magnetic chuck/table, coolant system and protective side guards. Used industrial machine; brand/model not clearly visible in the photos. Auction-ID: A1-49190-48

Manual Lever Shear / Cutting Machine This item is delivered loaded on truck, Loading costs are specified as additional costs. Auction-ID: A1-49190-27

Conventional manual surface grinding machine with vertical column, magnetic table and handwheels. Used workshop grinder for flat grinding operations. Auction-ID: A1-49190-53

Technical details Manufacturer: ZMM Sliven Model: C400 (Type 400) Type: Centre lathe Configuration: - Geared headstock - Manual quick-change gearbox - Leadscrew and feed rod - Carriage with cross slide and compound rest - 4-position toolpost - Tailstock - Electrical control cabinet - Manual controls Application: - Turning - Facing - Boring - Thread cutting - General metalworking Construction: - Heavy-duty cast-iron machine frame - Conventional manual operation Estimated swing over bed: Approx. 400 mm Estimated distance between centres: Approx. 1500–2000 mm Dimensions: - Length: Approx. 3500 mm - Width: Approx. 1200 mm - Height: Approx. 1500 mm Weight: Approx. 2800 kg Condition: Used Observed condition: - Bed and carriage appear complete - Tailstock and gearbox installed - Electrical cabinet present - Chuck not installed - Heavy dust accumulation and  ...

Technical details Type: Independent 4-jaw lathe chuck lot Configuration: - Independent 4-jaw manual chucks - Individually adjustable jaws - Key-operated jaw adjustment - Large spindle mounting bores - Heavy-duty cast steel/cast iron construction Application: - Engine lathes - Manual turning centres - Large shaft machining - Irregular workpiece clamping - Casting and heavy component machining Estimated quantity: Approx. 5 units Estimated chuck diameter: Approx. 400–600 mm Construction: - Heavy-duty industrial workholding equipment - Precision-machined jaw slides Condition: Used Observed condition: - Jaw slides appear complete - No obvious cracks or broken castings visible - Moderate surface oxidation from storage - Dust accumulation present - Chuck keys not included or not visible - Spindle mounting standard and runout not verified Auction-ID: A7-49124-78

COMET universal vertical turret milling machine with swivelling head, manual table, vice and control panel. Conventional machine suitable for milling, drilling and light toolroom work. Auction-ID: A1-49190-47

Robust hydraulic pallet truck with a lifting capacity of 2,000 kg. Equipped with double load rollers and ergonomic drawbar control. Suitable for daily internal pallet transport in warehouse, workshop or business environment - Hydraulic lift control via drawbar - Operating lever in handle for lifting, neutral and lowering - 2 steering wheels - Tandem/ double load rollers at the fork ends - Steel forks - Robust welded construction - Compact and manoeuvrable - Color: yellow/black - Brand/model: unknown - UNUSED Auction-ID: A3-46152-10016

Robust hydraulic pallet truck with a lifting capacity of 2,000 kg. Equipped with double load rollers and ergonomic drawbar control. Suitable for daily internal pallet transport in warehouse, workshop or business environment - Hydraulic lift control via drawbar - Operating lever in handle for lifting, neutral and lowering - 2 steering wheels - Tandem/ double load rollers at the fork ends - Steel forks - Robust welded construction - Compact and manoeuvrable - Color: yellow/black - Brand/model: unknown - UNUSED Auction-ID: A3-46152-10017

General Description Universal vertical tool milling machine manufactured by the Kirov Machine Tool Plant, Odessa (USSR) . Designed for precision milling, drilling, slotting and general toolroom machining. The machine is equipped with a geared vertical spindle, T-slot work table and heavy-duty machine vise. Technical Details Manufacturer: Kirov Machine Tool Plant, Odessa (USSR) Machine type: Universal vertical tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle head T-slot machine table Heavy-duty machine vise included Longitudinal power feed Separate electrical cabinet Machine work light Condition Fair to good used condition. The machine appears mechanically complete with spindle gearbox, T-slot table, heavy-duty vise and electrical cabinet installed. Cosmetic paint wear, industrial staining and light surf ...

Serial number: 100135 Power: 1.1 kW Max. span: approx. 250 mm Reference: Walter - Lot 191 Auction-ID: A7-49834-27

Serial number: 00/138/95 Operating voltage: 230 V Connection: 60 W Reference: Baumstark - Lot 59 Auction-ID: A7-49882-89

Manual drum lifter from DENIOS with hydraulic lifting mechanism for the safe lifting and transport of drums. The device is designed for drums with a maximum weight of 300 kg and has a drum clamping device with gripping mechanism. It is used for internal logistics, in particular the handling and positioning of industrial and chemical drums. The device is used and shows normal signs of use due to use. A test sticker from LINDIG with next inspection year 2025 is available, a tested sticker documents an inspection on 07.10.2018.Scope of delivery: 1 drum lifter DENIOS FL 8-M Without further accessories Type: FL 8-M Year of construction: 2019 Max. load capacity (drum weight): 300 kg Serial number: 111310459-000100-001 Test standard: FEM 4.004 (95/63/EC, 99/92/EC, 2001/45/EC) Next inspection: 2025 ― Length: approx. 120 cm Width: approx. 100 cm Height: approx. 165 cm Auction-ID: A ...

For sale is a robust machine slewing crane with a load capacity of 1,500 kg, including HADEF hand chain hoist with 1.5 t load capacity and trolley. The crane was originally mounted on a 180 t injection moulding machine in a clean room. It was used there for lifting, assembly and maintenance work, as there was no overhead crane in this production area. The crane, the trolley and the chain hoist are operated manually. Technical data / equipment: Design: Machine slewing crane / assembly crane Crane load capacity: 1,500 kg Projection / arm length: approx. 1,100 mm Chain hoist: HADEF manual chain hoist Load capacity chain hoist: 1.5 t Manual operation Trolley / Chassis Solid steel construction Swivel design Originally mounted on a 180 t injection molding machine Location: Cleanroom production Dismantled state Scope of delivery complete according to illustrations Used condition with us ...

Working parameters: Universal manual grinding machine on a rack for tool sharpening. Equipment included: longitudinal table with T-slots, swivelling tool head, spindle/grinding wheel with protective housing, manual adjustments via handwheels, visible dial dial and pneumatic device. Notes: Industrial cast iron construction. Auction-ID: A1-50001-5

Manufacturer: VOLLMER Work parameters: Manual column grinding machine for sharpening cutting tools. Notes: Construction on cast iron column frame. Auction-ID: A1-50001-8

Manufacturer: VOLLMER / ELITE Working parameters: Universal manual grinding machine for sharpening and grinding cutting tools. Equipment included: longitudinal table with T-slots, swivelling grinding head, grinding wheel, swivelling and adjustable tool holder, manual movements via handwheels and integrated electric controls. Auction-ID: A1-50001-11

INTERSCIENCE - Scan 50 Pro - (07-2023) The Scan 50 Pro from the French manufacturer INTERSCIENCE is a new generation of manual colony counters. Designed to optimize the ergonomics of microbiology laboratories, it improves the technician's posture, protects the operator's vision and guarantees full data traceability Auction-ID: A1-49883-88

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.

Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.

Vacuum filling machine Vemag Robby, filling, portioning, linking, pc control. The vacuum filler is currently in the refurbishment and you are very welcome to test the machine in Koblenz, Germany.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Handtmann VF 616 + PLH 216 sausage unit / hanging unit, consists of vacuum filling machine Handtmann VF 616 for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, with Handtmann PLH 216 hanging machine. The sausage unit is currently in the refurbishment and can be tested in Koblenz, Germany.

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Handtmann FA 30 Top piston filling machine, piston filler for filling, portioning and linking. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany

Frey F-Line F50 vacuum stuffer, vacuum filling machine for filling, portioning, linking, CAN control, filling capacity up to 2.200 kg/h, filling pressure up to 30 bar. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann hanging line consits of Handtmann VF 100 and PLH 216, vacuum filling machine Handtmann VF 100, vacuum stuffer for filling, portioning, linking, case holding device, PCK control, with loading device, filling performance (variable adjustable) max. 3000 kg/h, filling pressure max. 55 bar, with Handtmann PLH 216 hanging machin.

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.

100L stainless hopper, adjustable fill size on mobile stainless frame

Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann VF 80/160 vacuum filling machine with loading device, linking device 34-4, vacuum stuffer machine for filling, portioning, linking, mc control, microcomputer control, filling capacity 3.000 kg/h, pressure up to 35 bar, portioning range 5-100,000 g, hopper volume 90/160 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, with servo drive, compact monitor control, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., with linking device You are very welcome to test the machine in our facility in Koblenz, Germany

Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.

used Handtmann VF 630 vacuum filling machine for filling, portioning, linking, year of construction 2008, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 10.200 kg/h, pressure up to 40 bar, up to 700 port./min., portioning range from 5-100,000 gram

Handtmann VF 628 vacuum filler with inline grinding system GD 93, filling, portioning, linking, monitor control, filling capacity 6.000 kg/h, pressure up to 72 bar, hopper volume 90/350 liters, arm lifting device, refurbished.

Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW

Handtmann VF 616 + PLH 216 hanging line Z-Version”, consisting of vacuum filling machine Handtmann VF 616, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, including Handtmann hanging line PLH 216 with casing holding device 216, and hanging unit 241-16 and 216-22, all machines will be refurbished after confirmation of order.

Handtmann VF 50 with attachment FPA

Continuous vacuum filler for straight filling, portioning, and twisting Optional: twisting and holding device All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Length: 90 Height: 165 Delivery time: 20 working days after advanced payment