136,841 used machines on RESALE, but how to find them? Machine Search
- Version for 3 lt bottle (double magnum) - for champagne capsule - works by pneumatic operation with 2 passages: -- First passage: pleating. -- Second passage: smoothing. Production: 100 bottles/hour Workable materials: Bottles 3 Lt - Capsules with max. length 150 mm Dimensions: 90 x 55 x 30 cm (length x width x height) Weight: 25 Kg
Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005
Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm
Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.
Plot has been tested for operation Auction-ID: A1-40164-114
Plot has been tested for operation Auction-ID: A1-40164-115
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
pressure: manuell t distance between columns: 50 mm dayligth: 50 mm total power requirement: kW weight of the machine ca.: 0,01 t dimensions of the machine ca.: 0,3 x 0,3 x 0,3 m • 4 units available, • bore at bottom, Ø 10 mm, • thread in spindle M 6, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-41281-48
Can be loaded with a forklift. Auction-ID: A3-46110-21010
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
Lever hoist, ratchet hoist KAISER +KRAFT Type: 1117 Load capacity: 3000 kg Chain length: 1500 mm used, tested ! Dimensions: 800 x 250 x 230 mm
Lever hoist, ratchet hoist PAGUS load capacity: 6300 kg stroke: 3000 mm with roller chain used, tested ! weight: 59 kg Dimensions: 1000 x 800 x 230 mm
Hand Control Valve, Hand Control Valve WMW St H2 ND: 1.0 MPa NW: 6 mm used ! Dimensions: 140 x 110 x 130 mm
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
pressure: 28 t distance between columns: 510 mm dayligth: 380 mm stroke: 260 mm weight of the machine ca.: ca. 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm
Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...
pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
Forklift hydraulic/manual operations, max load wight 600 kg
Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg
New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.
max. format 52 x 52 cm Year of construction 2002 Block Glue Press manual block gluing machine for cold glue Table model Delivery date: short-term
New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,
Soxtec FOSS ST 243 Manual Extraction System Semi-automatic laboratory extractor Reference : ST243 SOXTEC With Controller: CU 2046 Control Unit Year of manufacture: 2016 Without accessories Animal feed, feed ingredients, fodder, pet food, human food, food ingredients, grains, cereals, oilseeds, DDS, meat, meat products, fish, fish products, dairy products, environmental products (e.g. soil, sludge, wastewater) and other industrial products (e.g. pulp, textiles, rubber, tobacco, fertilisers, detergents, plastic materials, etc.). Crude fat, total fat and extractables
Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3
Hyllus 285 three-roll manual plate bending machine for bending and calendering sheet metal.
maximum number of results exceeded
please refine your search
50 € 
