129,021 used machines on RESALE, but how to find them? Machine Search
Rebord (Samed) Darix Evolution Pos semi automatic casemaker year 2017 automatic board feeder Size max. 46 x 90 cm hot melt gluing Weight 1.600 kg good condition
Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well
Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm -Weight: 1.4 kg
Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg
Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm
Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-47249-58
With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-47249-168
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
Basket size LxWxH:900 x 1.500 x 500 mm Max. basket weight:- kg No. of washing chambers:1 filling amount:min. 270, max. 400 l Machine weight:2.000 kg dimensions of machine:2.650 x 1.945 x 1.870 mm
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Lever hoist, ratchet hoist KAISER +KRAFT Type: 1117 Load capacity: 3000 kg Chain length: 1500 mm used, tested ! Dimensions: 800 x 250 x 230 mm
Lever hoist, ratchet hoist PAGUS load capacity: 6300 kg stroke: 3000 mm with roller chain used, tested ! weight: 59 kg Dimensions: 1000 x 800 x 230 mm
manueller Deckenherstellung - manual Casemaker Schmedt PräDeck Year 05-1986 - Serial-Nr. 246 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Hand Control Valve, Hand Control Valve WMW St H2 ND: 1.0 MPa NW: 6 mm used ! Dimensions: 140 x 110 x 130 mm
Key data: 25 t, 500 mm
almost unused NEHER screw press with clamping table
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm
Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005
Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
Manual spindle press, - Maximum filling height: approx. 90 cm, - Pressing area: 102 x 72 cm, Maximum fill level: approx. 90 cm, Pressure area: 102 x 72 cm
Forklift hydraulic/manual operations, max load wight 600 kg
New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.
New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,
Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg
Soxtec FOSS ST 243 Manual Extraction System Semi-automatic laboratory extractor Reference : ST243 SOXTEC With Controller: CU 2046 Control Unit Year of manufacture: 2016 Without accessories Animal feed, feed ingredients, fodder, pet food, human food, food ingredients, grains, cereals, oilseeds, DDS, meat, meat products, fish, fish products, dairy products, environmental products (e.g. soil, sludge, wastewater) and other industrial products (e.g. pulp, textiles, rubber, tobacco, fertilisers, detergents, plastic materials, etc.). Crude fat, total fat and extractables
Offer 26027 Technical data: - Max. pressing force 32 t - Max. ram stroke approx. 250 mm - Max. installation height 350 mm - Pitch per revolution of the handwheel approx. 48 mm - Stand width / passage approx. 575 mm - Table support surface with 4 diagonal T grooves 575 x 475 mm - Printing plate area 500 x 260 mm - Tool holder at the top 30 mm - Through-hole in the table 200 mm - Space requirement approx. W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx. 1000 kg
Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...
Pressure output max. 15,000 PSI incl. weight set and spare seals lots of accessories Type: Hydraulic Hand Pump / Comparator Pump Pressure range: 0 to 1,000 bar (15,000 psi) Medium: Water or Oil Auction-ID: A1-46686-6
- Version for 3 lt bottle (double magnum) - for champagne capsule - works by pneumatic operation with 2 passages: -- First passage: pleating. -- Second passage: smoothing. Production:? 100 bottles/hour Workable materials:? Bottles 3 Lt - Capsules with max. length 150 mm Dimensions:? 90 x 55 x 30 cm (length x width x height) Weight: 25 Kg
- manufactured entirely from stainless steel AISI 304, - designed for the internal rinsing of new bottles and jars, -completed with the use of pre-filtered air or water via spray nozzles prior to container filling Method of function. - the operator manually collects the container and inverts it over the spray nozzle, - the application of light pressure opens the liquid/pneumatic valve internally rinsing/blowing the container, - a short standing time should be allowed for any residual water to drain, - the machine will be supplied with water or air filtration system to suit customer requirements. Production: indicative up to 300 b/h Dimensions: 600mm X 500mm X H 600 Weight: 25 kg. Optional: recirculation with pump
Power supply: 240V; Power consumption: 0.33 kWh; Sturdy metal construction; Silicone seal for tight closure; Temperature control; Replaceable attachments The manual box sealing machine is a compact professional device designed for hermetically sealing plastic or cardboard boxes (trays) with special thermal foil. Auction-ID: A7-46794-16
- Made entirely of high-quality stainless steel - There is a round hole in the base with 6 radially arranged sharp steel blades - The device is designed for instant, safe and completely uniform cutting of bulky fruits and vegetables into 6 equal parts. Auction-ID: A7-46794-17
Serial number: 100135 Power: 1.1 kW Max. spanwidth: approx. 250 mm Auction-ID: A7-46287-191
Model: SJ15 Cleaning Performance: 1.8k m²/h Waste water tank: 10 l Fresh water tank: 6 l Power source: battery Charging time: 4 h - 6 h Weight: 70 kg Arm +- : Width 440 mm, Depth, 660 mm. Height 1,040 mm Tires: Solid rubber Scope of application: Indoor Auction-ID: A3-43535-21885
Set of manual capsules - Ref 5631 Quantity: 3 Max. present format: 00 Number of holes: 65 and 2x30 Overall Dimensions (WxDxH): 200x230x130mm Incoterm: EXW Auction-ID: A1-47051-94
maximum number of results exceeded
please refine your search
50 € 
