mandrel used for sale

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

Various SK50 tool holders are available for sale. Size: SK50 Standard: DIN 2080 Various different designs, such as: - Collet chuck - Weldon chucks - Combi clip-on milling mandrels -Knife head attachment -Intermediate sleeves for MK with exfoliating flap -NC - Drill chuck -etc. All tool holders are sold without tightening bolts

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

Test mandrelTechnical specifications:Diameter: 49.999 mmLength: 330.324 mmRecording: ISA 40unusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single-spindle bar feeder. control panel ePalm10 max. material length: 3,300 mm max. material diameter: 52 mm feeder width 830 mm feeder length 4,650 mm weight 1,500 kg Centering inserts can be purchased for the feeder: 28.5 mm 35 mm 38.1 mm 48 mm and clamping mandrels for diameters: 38 mm 31.9 mm 25.7 mm

Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill rods φ 40 , 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 Mandrels MK5 - φ 16, 22, 27,32,40mm 2 Pliers chuck Clarkson 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: end mill rough/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 rough/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 700,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 threaded rods M20, L-120 – 400mm 3 x 2 pcs. clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( backing )

Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Milling tool Collets End milling Cutter Roller head milling cutter Grinder 20.000€NP Tools for milling machines including cabinet are offered. Among other things: Parallel bars Two-knife trimmer Three-knife trimmers Four-knife trimmers Roller head milling cutters Collets Spacer rings Cutter mandrels Among others suitable for this milling machine: Friedrich Deckel FP 2 LB milling machine

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

Sell a tool carrier trolley with the tool carrier system Kelch TUL System. Condition: Used Composed of 1 pcs car Tulmobil System 2 Model S2; 16 pcs TUL System Goblet for SK40 46 pcs SK 40 tool holders, including 5 jaw chucks, 1 measuring chuck, 21 collet holders with collets OZ462E; 3 collet chuck OZ, 2 collet chuck OZ approx. 90mm long, Mandrels for saw blades, roller end mills, cutter heads, etc Chip pliers MK1

Technical data (subject to change) spindle for cutter mandrels MK5 Adjustment of the spindle height by handwheel Table opening can be adjusted via insert rings Speed change via belt reassignment (3,000 / 4,500 / 6,000 / 9,000 rpm) Brake by foot pedal Weight approx. 600-700 kg

Tool carrier, receptacle for milling mandrels, 5 pieces goblet TUL-SYSTEM HSK63 plastic Dimensions( one tool carrier): 240 x 140 x 130 mm used, tested ! Dimensions: 620 x 240 x 130 mm

Tool carrier, holder for milling mandrels, 10 pieces PAGUS SK40 Material: plastic Dimensions ( one tool carrier ): 82 x 65 x 97 mm used, tested ! Dimensions ( packaging ): 330 x 170 x 100 mm

Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...

We offer it dismantled and CIF ITALIAN PORT., In very good conditions,still connected, can be seen in work on appointment or on a video call. The line includes: N. 2 extruders diam. mm.55, 78 kW 30 L/D N. 1 extruder diam.75 mm. 142 kW, 30 L/D n. 3 lever type screen changers Melt control system 3-layers still die Ø mm.300 gap. mm.1,4 IBC cooling system AM500/2 dual flow cooling ring 2 temperature exchange batteries electrical cabinets with Mitzubishi inverters Oscillating pull-off system width mm.1700, working width mm.1600, Gusseting units FIFE web guider mm.1700 Bubble driver with vertical adjustment and sensor for automatic bubble inflating (maximum Ø 1.175 mm.) for 3.386 mm.web circumference) Back to back winding station 1.680 with 4 expandible mandrels Automatic film cutting Automatic reel unloading system Bolted 12 m.tall tower with 3 storey, ladders (10 m. at 3rd floor + 2 m. pul ...

: gebraucht : 2015 : 5454 : prompt, Zwischenverkauf v : China : 2200 € : 1580 € : 1 : 2.000 x 50 mm : 250 x 50 mm : 400 - 2800 1/min : 35 mm : 2.2 kW : 1160 mm : 700 mm : 1850 mm : 150 kg belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pfauter gear hobbing machine / module 2.5 x250 -Module 2.5mm -Wheel diameter 250mm -Mandrels -Interchangeable wheels -otherwise as pictured Dimensions: Ji7pv08nrp LxWxH 1.4x0.9x1.7 meters Weight approx. 900Kg

Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

MIKRON VCP 710 high speed vertical machining center with HEIDENHAIN 426 control. Unique opportunity, machine in perfect condition. Including magnetic plane and all its mandrels. X axis travel 710 Y 600 Z 500. Spindle speed 18000 rpm, chip conveyor.

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure,, Software path management,, Software end mill (207/208),, Software disc-shaped workpieces on the front side (221/222/223/224),, Software profiled workpieces (233/234/239/240),, Software hogger, hogger profiled (255/256/257/258/260/261/262/263), Software for disc-shaped workpieces (264/265),, Software for end and joint milling cutters (267/268/277/278),, Software step tools (271),, Software scoring saws (299),, Software saws flat tooth (301), Software saws one sided with bevel (302/303),, Software saws alternating teeth (304),, Software saws trapezoid trapezoid tooth (309),, Software saws flat roof tooth (310),, Software saws flat-tra ...

ROTOCONTROL RSH 440 ECOLINE  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm mandrels

Material width 250 – 1.510 mm Material thickness 0,6 - 3 mm Coil inner diameter 508 / 610 / 750 / 810 Coil max. Outer diameter 1.800 mm Coil max. weight 28 Tn Re 280 Mpa Rm 450 Mpa Length 280 – 6.000 mm Nr. of rolls 17 rolls Diameter of leveller rolls 69 mm Nr. of back up rolls 54 Diameter of back up rolls 130 mm Shear Flying shear Total installed power 150 Kw Line speed according to thickness Speed 40 m/min with thickness 0,6 mm Speed 40 m/min with thickness 3 mm includes: 1 Buffer coil car 2 Entry coil car 3 Double de-coiler with hold down arm and pneumatic brake 4 17 rolls leveller (diameter 69 mm) and backup rolls manually adjusted 5 Flying saw with scrap output car 6 Out conveyor 7 Stacker 8 Roller output tables 9 Electrical cabinets Revamping: Year 2008: Flying saw New stacker New electrics and automation New gearbox leveller Ye ...

Crippa cnc pipe bending machine All hydraulic elements have been revised It bends up to 323mm pipes. It is fast and sensitive. It has Turkish software and touch screen panel. There are 5 types of bending dies and mandrels. Rotation and advancement are servos. Our machine has no problems and can make very serial bending.

Nice entry-level assortment: 16 milling heads and 6 grooving discs, etc. Some profile milling heads, radius milling cutters large, groove discs, adjustment groovers, rebate head, glue milling cutters, flattening cutters, swivel cutter heads, universal profile heads with various used profile knives and various thrust rings, as well as many new inserts All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. In sturdy steel cabinet with four pull-outs. Dimensions approx. 600 x 800 x 1000mm, weight approx. 230kg Trolley board included The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input ...

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Automatic loading system HS # 172 (workpiece weight up to 5 kg, stack height up to 180 mm),, Automatic set-up of the machine (automatic saw infeed axis, saw stop for diameter control, audio probe Measuring device for automatic probing, etc.),, Standard software package for tooth geometries after tooth shape summary,, Software for grinding saw blades with group teeth, with different tooth geometries,, Software for replaced and broken teeth,, Data entry station for the sawblade data, with touchpanel,, Device for internal coolant supply using oil,, Coolant collecting pan including grids for the machine,, Coolant co ...

Nice entry-level assortment 14 milling heads and 3 grooving discs etc. Some radius milling cutters, groove discs, adjustment groovers, folding head, glue cutters, swivel cutter head, universal profile head with various used profile knives and various thrust rings, as well as many new inserts, measuring tools All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and  ...

Description: With interchangeable holders SK 40 SK 50 Reference setting mandrels DYMO label printer weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,500 mm

Grinding spindle incl. grinding wheel, 2 holders, pulleys, electric motor, wheel cover, balancing mandrels, and description. Fortuna, 14 UA 85, Outside Ø : Ø 85 mm Length : approx. 400mm

Grinding spindles Make : Fortuna, Reinecker, VOUMARD 2 pcs. Internal grinding spindle, Malcus – Sweden , Type: KR60-400, up to 20.000rpm, φ. 60mm, L-400 ( 520) Price: á 300,- 1 pc. internal grinding spindle, Germany (Fortuna) , type: UJ 40 bF, φ. 40mm, L-370 (500) Price : Euro 300,- 1 pc. External grinding spindles, FORTUNA, type: 14 UA 85 1 R, 2200 rpm, φ 85mm, L 270 ( 400 ) Price : Euro 600,- 1 pc. Internal grinding spindle VOUMARD, 20448 – C28-9D up to 28,000 rpm Outside Ø 90 mm, Length : approx. 350mm , Price : Euro 800,- Various grinding wheel holders, grinding mandrels, sharpening stones on request !

Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.

Description Single Layer Blown Film Line Material: LDPE and COMPOSTABLE Film working width: 600 / 1.600 mm. Die diametter: 100-200-300 mm. – air gap=1,4 - Blow Up Ratio (BUR) =1,5-4,5 Film thickness: 30 / 200 μ Thickness tollerance: sigma 2 ± 8% Production: 100 / 160 kg/h (with ambient temperature at 25° C) the flow rate can vary according to the thickness of the film, the width of the tube and the type of raw materials used Maximum production speed: 80 m/min Finished reels maximum diameter: 1000 mm Cardboard mandrels diameter: 3" (internal diameter) Twin winder type BA-2/1800 Line total height: 9 m