man type d used for sale

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Hole circle: Ø 230 mm -Weight: 24 kg

Festo pneumatic cylinders Pmax 12 Bar End positions with slot nuts Length 92 cm

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

Contactor, semiconductor contactor, contactor, power contactor, illuminated button, indicator light approach -Square D: indicator light attachment D1V1Y -Diameter: 22 mm -Price: per piece -Quantity: 40 pieces -Minimum order quantity: 5 pcs -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, illuminated pushbutton, indicator light attachment -Square D: indicator light attachment DWSM -Diameter: 22/30 mm -Minimum order quantity: 5 pcs -Quantity: 84 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting kneading machine Diosna Capacity: 120 kg dough With protective grille 2 speeds via foot pedal Condition: Repaired

Contactor, semiconductor contactor, contactor, power contactor, illuminated push button, indicator light system -Square D: indicator light attachment D1V1W -Diameter: 22 -Price: per piece -Quantity: 90 pieces -Minimum order quantity: 5 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece

Flexible exhaust pipe, exhaust pipe, flexible pipe, connecting pipe -Pipe: flexible -Connection: outside Ø 115 mm -Inside: Ø 111 mm -Dimensions: Ø 134 x 239 mm -Weight: 1.6 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1,5 -Price: per piece -Number: 2 Stück -Dimensions: 840/95/H95 mm -Weight: 7,6 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-B-DCI-24/230 -Number: 11x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport cart, hand truck, Toughsystem, transport trolley -Manufacturer: Dewalt, Tough System tool trolley -Boxes: 2 pieces Dewalt Tough-Box including content see photos -Frame: metal -Dimensions: 550/690/H1100 mm -Weight: 29 kg

Moving bezel, moving bezel, bezel, steady rest, lynette -max. passage: Ø 155 mm -Tip height: 265 mm -Technical drawing: in the photos -Dimensions: 445/60/H485 mm -Weight: 18 kg

Stainless steel tank, stainless steel container, silo system, tank, lid, sealing cap -Closure cover: with spring clamp -Price: per piece -Quantity: 11 pieces -Minimum order: 4 pieces -Dimension: Ø 180 x 45 mm -Weight: 0.4 kg/piece

Bezel, steady rest, lynette -steady rest: from lathe WMW DLZ 800 -Max. Passage: Ø 260 mm -Tip height: 495 mm -Technical drawing: in the photos -Dimensions: 670/130 / H785 mm -Weight: 98 kg

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Moving bezel, bezel, setting stick, lynette -Bezel. Moving, from WMW DLZ 800 lathe -Max. passage: Ø 210 mm -Technical drawing: see photos -Dimensions: 440/430/H700 mm -Weight: 66 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 044927 TT 321-2 302R 171.6-905 E23 -Outer milling cutter: Ø 172 mm -Height: 30 mm -Hole: Ø 40 mm -Bolt circle: Ø 60 x 8 mm -Weight: 1.7 kg

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-25-50-PA-GF -Piston: Ø 25 mm -Stroke: 50 mm -Max. pressure: 10 bar -Number: 4x cylinders available -Price: per piece -Dimensions: 135/95/H45 mm -Weight: 1.6 kg

table diameter: 495 mm table load: 300 / 150 Kg swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: 0,5 - 3,2 U/min spindle bore: 65 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMPLETELY RENOVATED

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE! built of year 1988 / overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw ...

Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil unused in original packaging -Type: BB230AS -Voltage: 230 V/10 W -Price: per piece -Number: 21 piece -Dimension box: 65/55/H75 mm -Weight: 0.3 kg/piece

Deck oven Wachtel Piccolo I-5 DMS 3 Master EM 100 glass - 5 floors each 80x60 - each floor with separate control - Top and bottom heat can be controlled separately - each floor with a separate steam box - Floor entrance height: 14cm - with proofing cabinet - with exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 12 / 2014 - Electrical connected load: 23.7 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil -Type: BB230AS -Voltage: 230 V/10 W -Price: per piece -Number: 8 piece -Dimension box: 70/45/H95 mm -Weight: 0.3 kg/piece

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker >  ...

AVK rotating frequency converter 50 to 60 Hz with AVK generator DKBN120K/490-12TS and AVK motor DKMBN 120L/400-10TS for sale used in working condition. You can also purchase only the generator or engine (on request). Frequency converter from 1986, complete with motor (50 Hz) and generator (60 Hz). Motor: 345 kW x 1,500 rpm, 400 V/50 Hz Generator: 400 kVA x 1,500 rpm, 380 V/60Hz Year of construction: 1986 Weight [kg]: 7.952 Dimensions LxWxH [cm]: 475x110x160 Generator AVK DKBN120K/490-12TS Manafacture: AVK Model No.: DKBN120K/490-12TS Type: air-cooled AC generator Serial Number: 5639822 Engine DKMBN 120L/400-10TS Manafacture: AVK Model No.: DKMBN 120L/400-10TS Type: AC motor Serial Number: 5639825

Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve - Manufacturer: Valpres -Type: 72000007 -Size: DN32 PN40 -Price: per piece -Number: 3 piece -Dimensions: 155/250/50 mm -Weight: 4.3 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-DCI-24/230 -Number: 2x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece

diameter: 300 mm width: 200 mm height: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electric motor, three-phase motor -Manufacturer: VEM, electric motor type DMK 5/6 RA -Power: 3.5 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: P33 -Dimensions: 515/360/H285 mm -Weight: 77 kg

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

Doosan DNM 750 II Machining center - vertical - new in 2016 - control system: FANUC

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, Standard cylinder type DSN-12-160-P -Stroke travel: 160 mm -Piston: Ø 12 mm (1.13 cm²) -Piston rod: Ø 6 mm/M6 -Dimensions: Ø 20 x 265 mm -Weight: 0.145 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, standard cylinder type DSNU-20-25P-A -Stroke travel: 25 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm -Price: per piece -Quantity: 6 pieces -Dimensions: Ø 36 x 160 mm -Weight: 0.2 kg/piece

Hydraulic lift table 1000 Kg Height from 85 mm - 860 mm 150kg costs 120 euros more

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-50-250-PPV-A -Stroke travel: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm/M16x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 430/65/H65 mm -Weight: 2.4 kg/piece

Low and Duff 6T Chocolate kettle 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...

MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg

Handwheel -Socket: Ø 22 mm -Pitch: 35 mm -1 graduation: 0.5 mm -Dimensions: Ø 225 x 160 mm -Weight: 4.6 kg

The Digiline Label Offline system makes it possible to pre-produce and serialize (pharmaceutical) labels quickly, abrasion-resistant and process-safe. In this way, the serialization process is decoupled from the dispensing process in terms of time and space. Machine incl. PLC OMRON. Output: 60 m/Min.

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 192 mm -Beeks: individually and completely adjustable -Passage: Ø 51 mm -Weight: 14.5 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 450 mm -Piston rod: M20 x 1.5 -Air inlet and outlet: adjustable -Dimensions: 680/115/H115 mm -Weight: 8.1 kg

TIG welding machine, welding machine, TIG welding machine -TIG welding machine AC/DC direct/alternating current -Hose packages: 3 -Max. welding current: 225 A -Air-cooled -incl. ground cable -Gas valve -Dimensions: 610/1270/H860 mm -Weight: 288 kg