man type d used for sale

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

Description 0.6 bar – Vacuum/Pressure Suction power 25 m3/h

Description Volume flow 70 cubic meters/h 6 bar

The blower is installed in a sound insulation hood with base frame, safety valve, check valve and attachmentparts. The drive motor can be designed according to customer specifications. The compressor stage is completely overhauled. You can also purchase only the GM 80 L level. If you have any questions, please call us.

Description – Volume flow 80 cubic meters/h – 6 bar – 4 KW

Tier Oven Wachtel Piccolo I-6 DMS 3 Year of Make: 2016 A used electric deck oven Wachtel Piccolo I-6 with 6 shelves each 80x60cm is for sale. This oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Deck Oven Quail Piccolo I-6 DMS 3 Glass with 7-Day Clock - 6 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - 29.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction: 7/2016 Shipping costs and trade-in on request.

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

Description Compressed air system, consisting of compressor with boiler substructure 200 Ltr. MARK MSM 2.2 KW Dmini built in 2006, only 2818 hours power 10 bar additional. Refrigeration dryer unit additional. Kessel, 250 Ltr. from 2013

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm

Laboratory bead mill Manufacturer: VMA Getzmann GmbH Type: Dispermat SL-C50 N°: 0819203 Built: 2003 as good as new with ceramic grinding set with control panel additional pump with user manual and documentation LWH: 670 x 700 x 370

Table milling machine DROMA Type FM-4 Machine No. 8301 Built in 1994 Motor power: 5 kW With engine brake Spindle left and right rotation Speeds 3000/4500/6000/9000 rpm Spindle diameter 30 mm Spindle clamping length 150 mm Extraction connection diameter 2x120 mm Milling fence with fine adjustment left and right Table size 1010 mm x 900 mm Front and rear table extensions Dimensions 1 piece 1200 mm x 750 mm, 1 piece 1000 mm x 720 mm Machine weight 700 kg Weight of the table extensions each approx. 20 kg Dimensions Machine 1500 mm x 1200 mm x H 1400 mm With table extensions, total length 3220 mm Loading dimensions 1 pallet 1500 mm x 1200 mm x H 1600 mm Weight approx. 710 kg 1 pallet 1200 mm x 800 mm x 1200 mm, weight approx. 60 kg

Qty. 1 Second-hand Decoral coating profile production line Mfc.: DECORAL Built: 2004 Type: VIV 801/2 – TRANSFER SEMI – AUTOMATIC Output (theoretical): approx. 90 pcs./hour Consist of: Bagging machine – CO 130BB Automatic crane – basket handling Gas Sublimation oven VV801/2.T Electrical Sublimation oven for small parts – 68 kW The table can handle up to 15 profiles per oven batch and given that the cycle time is less than 10 minutes. The line was in operation for 2-3 years only – 1 shift operation!

-Boiler with car for spiral kneader Diosna W 240 A -with handle -with stainless steel boiler -Boiler diameter 96cm outside

Angular table for lid milling machine Clamping flat 900x530mm 8 St T-hooks Never used

Parcels of 7 machines 1x CNC 5 axis milling center, brand Okuma, type MU 400 VA, built in 2004, with various accessories and tool holders 1x CNC 5 axis milling center, brand DMG, type DMU 50/60, year of construction, 1996 with various accessories and tool holders 1x CNC 3 axis milling center, brand Okuma, type VR 40II, year of construction, 1995 with various accessories and tool holders 1x CNC 4 axis milling center, brand Okuma, type MC 40VA, built in 1991, with various accessories and tool holders 1x tool adjuster, Make EZSET Type 400 1 x Schumpfgerät, Brand Heimer, Type Power Clamp, Year of construction 2019

centrifugal pump Manufacturer: Hilge Type: Durietta I-100-60,75 Item #: S7 6253 Engine power: 0.86 kW LWH: 370 x 240 x 280 mm

Domino Model: DPX1000 digital Fume extraction cabinet Serial: 082236-4051 Domino laser fume extractor cabinet, 1Ph

Tool, spare part, accessories

used, good condition from plant disassembly 1x ELTRA DSG10.0 three-phase transformer - Year of construction: 09/10 Power: 10 kVA at 100% ED Prime: 3x 200 V - 210 V - 240 V / 3x 29.5A Sec.: 3x 400 V / 3x 14,4 A 50/60 Hz Isol.Kl.: ta40°C/B Circuit: Dyn5 Cooling: AN Space requirement LxWxH: 670 x 490 x 660 mm (mobile with rollers) Price is plus VAT free loading Warehouse Gießen - shipping possible by arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sales reserved The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.

Brand Engine : Detroit Model : 12V 91 TI Power: 540 hp RPM : 1800 General condition: Running taken out with gearbox reference 20191 Options Flywheel housing Flywheel Governor Exhaust system Turbo Starter Panel Water Pump Weight (kg) 2300 Dimensions (cm) 230X120X160

Various spare parts for Oerlikon lathes.

Planing comb to Maag gear planing machine

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

3692 KW Dresser Tuthill Nadrowski Tandem Condensation Turbine (steam turbine)for sale. 58.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. Scope of supply: Steam turbo set and generator (6 KV). On request, generators with 10 to 11 KV are also available. A suitable capacitor costs 75,000 € extra. Not included: Control. Brand: Leroy-Somer Manufacturer: Tuthill Nadrowski Turbinen GmbH Type: LSA 56 BS 5- 4P Serial No.: 168233-1 Year of construction: 12-2001 Electr. Power: 3692 KW Power: 4625 KVA Voltage: 6000 V rpm: 1500 rpm Size (L x W x H): 3.10 m x 1.80 m x 2.70 m Weight: 10,000 kg Total output HD and ND turbine: 3692 KW. Total weight steam turbo set: 15 tons + 10 tons generator.

ABG DIGICON II - CONVERTING Year of Manufacture: 2009 ________________________________________ Product Description: Year of Manufacture: 2009 Location: Labelpresshop/Germany Availability: Immediately available Condition: Very good working condition, regularly maintained ________________________________________ Machine Specifications and Equipment: • Web width: 330 mm • Control panel: Movable central control panel • Unwinder: With web edge guide system • Corona Treatment System for surface preparation • Round-to-round Heat Sealing Unit • Flexo Printing Unit: Full / semi-rotary • Cold Foil & Lamination Unit • Drying System: UV and hot air drying • Central Dancer Roller for web tension control • Die-Cutting Unit: Full / semi-rotary with heating oven and Beck Gapmaster • Waste Removal System: De-weeding with rewinder • Slitting Knives: 2 bottom  ...

RAANTEC DELTA 250 UV – Converting Year of Manufacture: 2003 ________________________________________ Product Description:  Web width: max. 10 inch – 254mm  1x die-cutting unit  1 x inking unit UV Flexo 1-colour with corona and dust removal  1 set of impression cylinders  Unwinding 850mm  Winding on large roll and small roll possible  Ran all the time only in single-shift operation. Machine Specifications and Equipment: ________________________________________ Accessories Included:  Manuals  Keys  etc. ________________________________________ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) ________________________________________

Key data: 370 mm, 650 mm, 3500 1/min

Machine Details Stock-No. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex Site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570 mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm Turret (X-Stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM SCHIP CONVoYEUR TOOL SETTER COOLANT INTERLOKED GUARDS

Linear machine to rins empty cans with filtered water incl. 2 can turning stations and 1 rinser station capacity: up to 3,000 cans/h optional: easy to adjust for another can format: You just need two other can turning stations

Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm

Telemecanique DK1-HC23

Machine Details Stock-No. 1105-03325 Type of machine Machining Center - Universal Make DMG Type DMU 70 V Year of manufacture (2000) Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 750 mm y-travel 600 mm z-travel 520 mm table-size ø 700 x 500 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12,000 rpm feeds longditudinal/cross/vertical 20,000 mm/min rapid traverse 50 m/min ATC 24x workpiece length 315 mm weight of tools max. 6 kg table load max. 0.35 t weight of the machine approx. 7 t Additional information , chip conveyor CNC CONTROL HEIDENHAIN I TNC 430 12000 RPM SK 40

Machine details Stock number 1105-03328 Machine type tool milling machine - Universal Make MAHO Type MH 800 E Year of construction 2000 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock price Technical details x-path 700 mm y-way 550 mm z-path 500 mm Speed 20 - 5000 rpm Tool holder SK 40 Quibola stroke vertical 80 mm Feed 1 - 5000 mm/min Rapid speed 6000 mm/min Table size 900 x 550 mm Total power requirement 16 KVA Weight of the machine ca. 7 t Space requirement approx. 2.4 x 2.85 x 2.1 m Information - with web control CNC 532 - with FIXED ANGLE TABLE WITH TOOL CHANGER - Enclosure Machine under power Ready for demonstration.

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition

Code 81199 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 504 Manufacturing date 1987 Table size 1400 x 450 mm Grinding dimensions L x W x H 1200 x 600 x 450 mm Magnetic plate size L x W 1200 x 450 mm Table speed movement 1 - 30 m/min. Max. distance table surface – centre grinding wheel 675 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1200 rpm Spindle power 7,5 kW Grinding wheel size Ø 450 x 50 ( 100 ) x Ø 127 mm Weight 6000 kgs Size of machine 3250 x 1850 x 2600 mm Total power 19 kW – 380 Volt Accessoiries Electro magnetic plate 1200 x 450 mm from Tecnomagnete Coolant Pendel control Condition Machine is in normal condition

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Code 171305 Description CNC surface grinding machine Make DANOBAT Model PSG - 1000 Serial No. 30102 A Control Fanuc 210i - M Year 2001 Tablesize 1000 x 500 mm Grinding surface L x W x H 1000 x 600 x 450 mm Long ( X axes ) 1150 mm Cross ( Z axes ) 500 mm Speed table movement 1 – 30 m/min. Max. distance table – centre grinding wheel 650 mm Max. workpiece weigth 1500 kg Max. table load 1500 kg Magnetical plate size L x W 1000 x 500 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 100 x Ø 127 mm Spindel power 7,5 kW Spindel speed 1500 rpm Motor power 7,5 kW – 380 Volt Total electr.com. 20 kW Total space L x W x H 3950 x 3150 x 2550 mm Weight 5500 kgs Accessoiries Elec. Magneticplate 1000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in g ...

vertical design, for simultaneous extruding of 4 strands, Sausage masses, etc. each strand with a diameter of approx. 15 mm, Capacity approx. 15 l, Drive 1.5 kW