man type d used for sale

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340

General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829

25 Schäfer cantilever rack double-sided upright 6.5 m Used goods, good condition, see pictures Height 6.5 m (IPE300) Arm length 100 cm (IPE100) 1000 kg load per boom Column load 7000 kg Wheelbase 100 cm Frame grey (RAL5010), strap blue 8 outriggers per upright Negotiation price: € 990,-- net from stock per upright Art.Nr.: P10262 Also available as a double-sided cantilever rack. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

81 m cantilever rack double-sided upright 6.5 m Very good condition, see pictures Height 6.5 m Arm length 120 cm 500 kg load per boom Load capacity per stand per side 2000 kg Wheelbase 150 cm Stands and arms RAL 5010 8 outriggers per upright Offer consists of 4 frames – 4.5 running metres: + 4 st. upright with double foot 6.5m high. +32 pcs. Boom, arm length / boom 120 cm Diagonal struts, bracing and distances are included. Negotiation price: € 2,590,-- net for 4.5 linear meters P10263 Also available as a double-sided cantilever rack. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as we ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ex ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgDrive power (100% DC)9 kWSpeed max.12000 rpmDrive power (40% DC)13 kWDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z600/560/510 mmSpindle taperSK 40 DIN 69871 Max. torque82 NmTool Magazine with30 PositionsTorque (100% DC)54 NmWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hSafety Package for Power FailureSafety Package for Power ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmTableTable surface 1760 x 750 mmMaximum load (table centre) 2000 KgSlot width 14 mmNumber of Slots 7Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazineInternal coolant supply package 80 bar / 980 lInternal coolant supply package 80 bar / 98 ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical-Machining centre Stealth Design; Control: CELOS with Heidenhain TNC 640 Technical DataRapid traverse longitudinal/transverse/vertical42/42/42 m/minFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minWorking area 1Cross700 mmLongitudinal1450 mmVertical550 mmIntegrated motor spindle speedMASTER®Integrated motor spindle speedMASTER® At speeds > 18.000 min-1, the use of tools with dual contact system (BIG-PLUS®) is stipulated.Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTableTable surface 1760 x 750 mmClamping System DIN ISO 7388-3-ADSpindle taper SK40 Tool holder DIN ISO 7388-1-ASpeed range - 20000 rpmTorque (40% DC) 130 NmSlot width 14 mmMaximum load (table centre) 1500 KgNumber of Slots 7Distance between T-Slots 100 mmCabin roofCabin roof In sheet steel design Open and close via front doorSpecial equipmentClamping pneuma ...

GeneralVertical Machining Center; Control: Control SINUMMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSpecial equipment4th. axis Lehmann

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard)Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rateInternal coolant su ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper,  ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Cross520 mmLongitudinal650 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct t ...

CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgGeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate Spindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rat ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsMaximum load (table centre)800 KgDimensions (L x W x H)3,3 x 2,7 x 2,94 mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z800/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1100 x 560 mmWeight approx.5550 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SysteminlineMASTER® spindle 12.000 rpminlineMASTER® spindle 12.000 rpm Spindle speed range 20 to 12.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 13kW (40% DC) / 9kW (100% DC) Torque: 83 Nm (40% DC) / 57 Nm (100% DC) bearings oil-air lubrSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872NC-D ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air wi ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline X Multi-Touch control CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Func ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmTableTable surface 1760 x 750 mmMaximum load (table centre) 2000 KgSlot width 14 mmNumber of Slots 7Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine 30 pockets HSK-A63Tool magazine 30 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazineInternal coolant supply package 40 bar / 600 lInternal coolant supply package 40 bar / 600 l conte ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal -Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock CoverAir coolant internal (through spindle centre)Air Coola ...

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low o ...

An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

GeneralVertical Machining centre; Control: CELOS X with HEIDENHAIN TNC7 CharacteristicsTable surface1400 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z42/42/42 m/minMotor spindle speedMASTER® 20.000 rpmMotor spindle speedMASTER® 20.000 rpm AC main drive: 35/25 kW (40/100% ED) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Air Coolant Internal (through spindle centre) switchable via M-FunctionAir Coolant Internal (through spindle centre) switchable via M-Function

Chip Conveyor, Chip Conveyor Belt, Coolant Cleaning, Chip Disposal, Scraper Conveyor, Scraper Conveyor, Chip Chain Conveyor, Hinge Belt Conveyor, Scraper Belt Conveyor – Subject to change – Manufacturer: RUEZ GmbH Type: Chip Conveyor, Scraper Conveyor Year of Make: 2002 TYPE: KF0WW2/306 DAS Conveyor belt width: 310 mm -Outlet height: 1300 mm -Total dimensions: L:4.370/W310/H1.820 mm -Total weight: approx. 800 kg Drive: Manufacturer: Getriebefabrik Cowig GmbH TYPE: SSMAH63 11-362.7 B3 TYPE: Worm Gear Specifications: Gear ratio(s2): 3.82 min-1. Torque (T): 337 Nm. Weight (m): 28 kg

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

This TORNOS DECO 2000/13 was manufactured in 1999. It features a bar passage of 16 mm and supports up to 20 fixed and 16 rotating tools. Equipped with an IEMCA loader, CONVEYORS IND. ASS. conveyor, and additional oil filter tank, this machine ensures efficient operation. Consider the opportunity to buy this TORNOS DECO 2000/13 swiss type turning machine. Contact us for more information about this machine.

This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information.

This TORNOS DECO 20A swiss type turning machine was manufactured in 2006. It features a bar passage of 25.4 mm and can accommodate up to 21 fixed and 15 rotating tools. Included are a ROBOBAR loader and an INDASS conveyor. An automatic extinguishing system ensures safety. Consider the opportunity to buy this TORNOS DECO 20A swiss type turning machine. Contact us for more information.

This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, its ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine.

This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine.

This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine.

This TORNOS DECO 2000/13 was manufactured in 2000. A robust Swiss type turning machine with a bar passage of 16 mm and maximum spindle power of 9.7 kWh. It includes an IEMCA GENIUS 226/32 loader and a CONVEYORS IND. ASS. TMTPF 1440 conveyor. Equipped with an automatic fire extinguishing system from Kraft & Bauer. Consider the opportunity to buy this TORNOS DECO 2000/13 Swiss type turning machine. Contact us for more information.

This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information.

This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information.

This TORNOS DECO 2000/20 was manufactured in 1998. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can handle up to 21 fixed and 15 rotating tools. It includes an IEMCA loader and a conveyor system, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 2000/20 Swiss type turning machine. Contact us for more information about this machine.

Have for sale new bearing bushing for Fryma Koruma

This TORNOS DECO 20A was manufactured in 2006. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can accommodate up to 21 fixed and 15 rotating tools. It includes an IEMCA BOSS 332 E/R loader and a CONVEYORS IND. ASS. TMTPF 2294 conveyor, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 20A Swiss type turning machine. Contact us for more information about this machine.

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...

This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine.