man type d used for sale

Transport rollers, wheels, rollers, support rollers -comes from a grandstand system -Rollers diameter: 125 mm -Number: 108 sets of rolls available -Price: per piece -Dimensions: 505/135/H50 mm -Own weight: 2 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Comes from a CNC machining center -Manufacturer: Visual Data -Type: MC31 GHEB1 HOM -Dimensions: 482/365/H265 mm -Weight: 12 kg

Time relay, safety time relay, safety controller -Manufacturer: Dold -Type: AA 7616.82 -Number: 9 relays available - Price: per piece -Dimensions: 45/80/H125 mm -Weight: 0.3 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Quantity: 10x reamers -Diameter: 5x Ø 35.5 mm H7 -Diameter: 5x Ø 45 mm H7 -Recording: MK -Price/Sale: only complete set -Weight: 24 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 3.12 kVA -Input: 3x 208-240V 12.0A OR 1x220-240V -Output: 3x 0-220 V -Output frequency: 500 Hz -Number: 1x converter available -Dimensions: 110/250/H180 mm -Weight: 2.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm -Power: 0.25 kW -Construction: B5/B14 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 440/140/H185 mm -Weight: 12.5 kg/piece

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available -Price: per package -Weight complete: 7.6 kg/package

Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Used continuous cutter SEYDELMANN, type: K206 DC8 -in used condition- - Speed variably adjustable and freely programmable - 2 speeds for reverse gear 80 and 160 rpm - Lifting tipper for 200 litre wagons - Head with 6 blades - Completely made of stainless steel - Separate Micro 114 control system in VA - Condition: used, technically tested, ready for immediate use Service: - Regular maintenance - Lubrication of the main shaft - Replaced fan bearings for cooling - Inspection of the main engine - Electrical inspection - The bearings of the main shaft are in good condition Specifications: Bowl volume: 200 litres Power: max. 100 kW Machine dimensions: 2,850 x 2,950 x 1,500 mm Control dimensions: 1,200 x 500 x 1,900 mm Weight: approx. 3,000 kg Inspection and test run possible on request.

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turbocharger for Deutz 545 for sale

The SUPERA-3015 A laser cutting machine is a general purpose type with fiber laser. It offers high dynamics in high-speed cutting of thin sheet metal, and they have the technology and know-how on board to produce stable and consistent parts even for thicker material, where the maximum thickness is limited only by the output power of the laser. Standard equipment A SUPERA 3015 comes with the following standard equipment:  An automatic changing table for an almost continuous cutting process  Two cutting tables with grid support  Boxes for scrap and dust removal under the working area of the machine  KEBA – LTI control with practically unlimited program memory  Integrated laser pulse generator  21.5" touch screen operator panel with graphical user interface  Mouse and keyboard  Cutting head for fiber laser source  Automatic selection of gas valve to ...

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, three-phase vacuum cleaners -EX: protected -Connection: 380 volts -Max. volume flow: (hose 50 mm Ø) 250 m²/h -Container volume: 35 l -Power: 2 kW -Dimensions: 900/500/H870 mm -Weight: 76 kg

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 3-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 25 to 80 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package More dough dividers in stock!

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 0.9 kVA -Input: 3x 208-240V 12.0A OR 1x220-240V -Output: 3x 0-220 V -Output frequency: 500 Hz -Number: 1x converter available -Dimensions: 110/250/H180 mm -Weight: 1.9 kg

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-14 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 130 to 400 grams/piece Pitch 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Many more dough dividers in stock!

Humidifier, Humidifir, Humidificateur, Hymidificador -Handover: in its current condition as inspected -Control unit: does not switch -Rated output: 13 kg/h -Operating voltage: 380 V -Power requirement: 9.8 kW -Quantity: 1 piece available -Dimensions: 360/530/H995 mm -Weight: 38 kg

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Subrange 40 to 120 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Option: other knitting plates Maintenance contract Many more TOP roll presses in stock!

Hydraulic motor, oil motor, hydraulic pump -Power/torque: 19.3 Nm/bar -Speed: from 5 to 500 rpm -Max. Pressure: 315 bar -Swallowing volume: 1265 cm³/rev -Dimensions: 500/500/H550 mm -Weight: 246 kg

Matcon IBC Discharge cone Stainless steel, 1000L, IBC discharge stations, 4 in stock

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Flange: Ø 210 mm -Hole circle: Ø 230 mm -Through hole: Ø mm -Weight: 19 kg

The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000

Dosing machine AG 8 DPE 250 built in 2012 with hot double jacket on the storage tank and accessories (filling heads and screw conveyor)

Stock Clearance Bread Cutting Machines

Twin door model to take two dolavs at a time. Also suitable for tote bins and lids. Has never been installed. Gas heated

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 110/165 V 200/300 Hz -Power: 8.3/12.5 KVA -Dimensions: 750/350/H320 mm -Weight: 150 kg

Gear motor, angular gear motor, electric motor, electric gear motor, three-phase motor -Angular gear motor -Motor power: 0.55 kW -Speed: 48 rpm -Pulley: Ø 170 mm -Construction: B5A -Shaft diameter: Ø 20 x 30 mm -Dimensions: 430/250/H190 mm -Weight: 19.6 kg

Bezel, setting stick, lynette -Number: 3x bezel quills -Diameter: 60 mm -Length: 140 mm -Grooves: 6/10 mm -Edition: Gray cast iron -Weight: 6 kg

Air cooler, evaporator, cold store, refrigerated container, cold room, ceiling air cooler -Number: 1x fan -Fan diameter: 400 mm -Lamella spacing: mm -Dimensions: 1030/1770/H400 mm -Weight: 82 kg

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour - 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 500 mm Control: Sinumerik 880 total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air cooler, cold storage, refrigerated container, cold room -Number: 2x fans -Fan diameter: 400 mm -No further technical data available -Number: 2x coolers available - Price: per piece -Dimensions: 1000/1700/H320 mm -Weight: 94 kg/piece

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 560 mm z-travel: 450 mm total power requirement: 3 kW weight of the machine ca.: je 2,5 t dimensions of the machine ca.: je 332,5 m Bundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 560 mm z-travel: 450 mm total power requirement: 4 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3 x 2,2 m No. 0104 Universal copy milling machine DECKEL KF 3 S built in 1979 with divided coordinate table Working area: 700 x 560 x 450 mm Drive power: 3 kW Accessories: Divided coordinate table Finishing spindle Locking arm Control handle with cable Stylus holder Collets Space requirement 3 m x 3m Weight approx. 2,380 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,5 x 2 x 2 m No. 3934 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 Tool holder SK 40 Speed range 2000 rpm Rigid table Documentation On request / optionally available: -Universal table / fixed table - Hydraulic machine vice - Tool cabinet - Rotary table Ø 380 mm -Cutting attachment -Collets and arbors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 1200 mm

Machine Details Stock-No. 1105-04018 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 V3 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min Face Stroke 400 mm Tailstock Quill Diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information NEF 600 V3 FROM 2011 acc.: hydr. 3-jaw chuck 380 mm, chip conveyor, coolant 3 AXIS WITH LIVE TOOLS 3 AND 10 FIXED TOOLS

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H65 mm -Weight: 9.7 kg

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H90 mm -Weight: 13 kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Machine vice base plate, clamping plate, vice plate, turntable -with: T-round groove -Dimensions: 330/240/H40 mm -Weight: 10kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 8 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.6 kg

Brand NN Year of Make: 2021, New/Unused Dimensions LxWxH (mm) 10.000 length ( 4000kg) Number of units in stock 5000 Terms of sale Contact us

Used Waldner rotary machine type Dosomat 2.3. New 1997. Three track cup packer. Cup diameter fi 95 mm.

Bezel, stick, lynette -Max. Passage: Ø 110 mm -Tip height: 220 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 440/320/H80 mm -Weight: 13.6 kg

Milling Machine Lid FP1 Travel XYZ: 300x150x340mm Spindle holder: ISO 40 S20x2 Spindle speeds: 40-2000 Size of the tables: 600x260mm -Feed on X and Z axes -Vert quill with 60mm stroke -Angle table . Chip tray . With some tools . Is cleaned and maintained . Nice machine in good condition

Key data: 730 mm, 560 mm, 560 mm

Machine Details Stock number 1105-04019 Machine Type Milling Machine - Universal Make DECKEL-MAHO Type DMU 60 MONOBLOCK Year of manufacture 2004 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Cargo base EX WORK Price Technical details x-travel 630 mm y-travel 560 mm Information With CNC control Heidenhain I TNC 530 FIVE AXIS MACHINE , 24-fold tool changer, r With CNC control Heidenhain TNC 530, 24-fold automatic tool changer, Technische Daten / technical details: Longitudinal travel X / X-travel longitudinal 730 mm Cross travel Y / Y-travel cross 560 mm Vertical travel Z / Z-travel vertical 560 mm Spindle taper SK 40 Speed range / spindle speed 20-12000 rpm Feed speed / feed range 20-20000 mm/min. Rapid traverse xy/z / rapid feed xy/z 30/20 m/min. table 1000 x 600 mm max. workpiece wei ...

• Stainless steel pharmaceutical version for mixing predominantly powdery materials and for granulating after the addition of binding agents • Gross capacity 122 litres, usable capacity approx. 37 - 100 litres • Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal • Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-blade, one-piece, drive with air gap seal • Container jacketed for heating/cooling (without separate heating/cooling unit) • Product temperature sensor • Blind flange for retrofitting a DIOSNA Mixing Probe • Lockable opening in the container lid for adding mixing components • Nozzle for adding liquid • Screw cap with degassing/venting filter • Pneumatic outlet, can be swivelled off for cleaning • HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurised enclosure protection class E Ex p (T4), manufactured by Gönnheimer, type ...