man type d used for sale

Used lifting mixer DIOSNA, type: S 35 -in bakery condition- - for 35 kg of dough - 2 courses - with timer -Dust cover - Machine runs smoothly - Technically tested and cleaned - very nice condition Inspection and test run are of course possible by arrangement.

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 40 x 110 mm -Protection class: IP 54 -Dimensions: 600/280/H270 mm -Weight: 48 kg

Gear motor, electric motor, electric gear motor -Speed: 17 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 410/230/H190 mm -Weight: 21.6 kg

Gear motor, electric motor, electric gear motor -Speed: 26.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 385/210/H215 mm -Weight: 18.3 kg

Geared motor, electric motor, electric geared motor -Speed: 216 rpm -Power: 0.33 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 33 -Dimensions: 385/220/H200 mm -Weight: 20.5 kg

Electric motor, three-phase motor -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 580/340/H260 mm -Weight: 75 kg

Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 250 mm -Piston diameter: mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available -Price: per piece -Dimensions: 560/182/H160 mm -Weight: 9.5 kg/piece

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 300 mm -Piston diameter: 100 mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Number: 2 pieces available -Piece price: 125 euros VAT. -Dimensions: 605/182/H165 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor -Speed: 6 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 675/260/H245 mm -Weight: 47 kg

Gear motor, electric motor -Speed: 453 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Dimensions: 500/250/H230 mm -Weight: 33 kg

Gear motor, electric motor -Speed: 32/65 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 5x available -Dimensions: 560/250/H220 mm -Weight: 32 kg

Hydrovane compressor with FriulAir air dryer and flex. Compressed air pipes Brand : Gardner Denver Year of construction: 2015 Assets: 7.5 KW Rpm; 1.465 Max. pressure: 11 Bar FriulAir: (built in 2015) Type: ACT12/AC Air flow: Nom. 1,200 l/min.

John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...

From operating resolution: Dulevo 75 EH Basu Year 2016 Running hours 435 Sweeping width 950mm Sweeping roller width 700mm Theoretical area performance 5700m²/h Speed 6km/h Tire Solid Rubber Battery 24Volt with charger --good condition-

TRM Electric Autoclave 1.5m diam. x 3.7m long Max. temperature 175deg C Quick Lock Door Max Work pressure 8 Bar Welded construction Complete with control panel Year 1990

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 -Flange: Ø 106 mm -Hole circle: Ø 135 mm -Through hole: Ø mm -Weight: 65 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/420/H340 mm -Weight: 124 kg

Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 450/265/H410 mm -Weight: 79 kg

Electric motor, three-phase motor -Power: 5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 530/370/H280 mm -Weight: 80 kg

Gear motor, electric motor -Speed: 29.5 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Brake: 380 V -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 460/200/200 mm -Weight: 22 kg

Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Features: Construction year: 1999 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,7 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hör ...

Gear motor, electric motor -Speed: 127/254 rpm -Power: 0.55/0.9 kW -Construction: B3 -1x shaft diameter: Ø 25 mm -3x shaft diameter: Ø 24 mm -Protection class: IP 54 -Number: 4x engines available -Price: per piece -Dimensions: 560/270/H240 mm -Weight: 43 kg

electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 385/320/H265 mm -Weight: 41 kg

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 2900 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: -Price: per piece -Number: 1x available -Dimensions: 460/320/H285 -Weight: 55 kg

Gear motor, electric motor, electric gear motor -Speed: 315 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3.5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 470/350/H300 mm -Weight: 62 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1120 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 985/290/H185 mm -Weight: 68 kg

Key data: 160 KW, 200 kVA, 400 V

Diesel Emergency Generator Type PDH16N with generator 6S160PN 200 kVA, 160 kW, 400V/3Ph/50Hz Built in 1971, only 772 hours run, mainly used in a hospital as an emergency generator

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1420 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 670/290/H190 mm -Weight: 57 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.4/3.3 kW 1720/3420 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/290/H185 mm -Weight: 61 kg

Deutz 628 cylinder heads 9 Pcs available Std sized seat bores Free of cracks and weldings Used but in good condition In our stock in Istanbul Please contact : infofin-marine

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.35/3.3 kW 1420/2850 rpm at 50 Hz -Shaft holder: Ø 30 mm -Dimensions: 665/290/H180 mm -Weight: 61 kg

Gear motor, electric motor, electric gear motor -Speed: 18/2 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 30 mm -Protection class: IP 44 -Brake: 24 V -Quantity: 1x available -Dimensions: 660/260/H230 mm -Weight: 40 kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H285 mm -Weight: 49 kg

Gear motor, electric motor -Speed: 0.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 675/260/H290 mm -Weight: 59 kg

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Gear motor, electric motor -Speed: 11 rpm -Power: 0.18 kW -Brake: 380 V -Construction: angle B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Weight: 20 kg

geared motor, electric motor -Speed: 81 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 - Price: per piece -Quantity: 1 available -Dimensions: 490/250/H220 mm -Weight: 35 kg

Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...

Gear motor electric motor -Speed: 56 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Brake: 220 V -Weight: 27 kg

sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of  ...

Technical data of the pallet rack crossbeam: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: sendzimir galvanized Box profile: 100 x 50 mm Truss type: SLB 100|15 Agraffe: 4 HK Design: Head truss Clear width: 2,695 mm 02x Safety pin, used Finish: sendzimir galvanized To secure the longitudinal members Note: The truss was flush with the agraffe flexed to the head truss. It is not possible to make any statement about the compartment load be made. Currently in stock Available: approx. 148 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. In addition, a desired Transportation or dispatch of this item is associated with additional costs, which can be requested sep ...

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resoluti ...