132,109 used machines on RESALE, but how to find them? Machine Search
Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 370/200/H205 mm -Weight: 18 kg
DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel
Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 390/210/H200 mm -Weight: 19 kg
Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.
Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 330/170/H165 mm -Weight: 10 kg
Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/190/H190 mm -Weight: 13.8 kg
Gear motor, electric motor -Speed: 20.5 rpm -Power: 0.37kw -Type: B5 -Diameter shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price per piece -Dimensions: 500/230/H220 mm -Weight: 31kg
Gear motor, electric motor -Speed: 41.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 390/200/H205 mm -Weight: 19 kg
Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm
Gear motor, electric motor -Speed: 62 rpm -Power: 0.37 kW -Construction: B3/5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 385/190/H200 mm -Weight: 15.8 kg
Gear motor, electric motor -Speed: 110 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 54 -Number: 1x gear motor available -Price: per piece -Dimensions: 315/140/H195 mm -Weight: 6.8 kg
Gear motor, electric motor, three-phase motor -Speed: 65/78 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 305/170/H195 mm -Weight: 7.6 kg
Gear motor, electric motor -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 450/270/H175 mm -Weight: 20 kg
Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg
Gear motor, electric motor -Speed: 100 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x gear motors available -Price: per piece -Dimensions: 335/170/H160 mm -Weight: 9.2 kg
Gear motor, electric motor -Speed: 15.5 rpm -Power: 0.11 kW -Construction: B5 angle -Diameter shaft: Ø 18 mm -Protection class: IP 54/65 -Number: 1x geared motors available -Price: per piece -Dimensions: 325/150/H145 mm -Weight: 9.2 kg
Gear motor, electric motor, electric gear motor -Speed: 18 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 54/65 -Price: per piece -Number: 2x available -Dimensions: 280/145/H140 mm -Weight: 6.7 kg
Gear motor, electric motor, electric gear motor -Speed: 27 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 370/180/H200 mm -Weight: 14.2 kg
Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 420/180/H160 mm -Weight: 16 kg
Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg
Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg
geared motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Price: per piece -Quantity: 1 available -Dimensions: 450/205/H200 mm -Weight: 20 kg
Geared motor, electric motor, electric geared motor -Speed: 21.5 rpm -Power: 0.075 kW -Design: B3 -Shaft diameter: 16 mm -Protection class: IP 54 -Price: per piece -Quantity: 3 available -Dimensions: 340/180/H160 mm -Weight: 12 kg
geared motor, electric motor -Speed: 128 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Quantity: 1x geared motor available -Dimensions: 390/130/H210 mm -Weight: 8.9 kg
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: ball bearings -Hole spacing: 350 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 395/85/H400 mm -Weight: 14 kg
The scope of delivery includes: 01x Particleboard/ flooring for mezzanine floors, new Manufacturer: UNILIN Division Panels Year of construction: March 2023 (new) Dimensions: approx. 2,600 x 1,020 mm (WxD) Particleboard thickness: approx. 38 mm Design: P4, grooved all around Weight / piece: approx. 65.50 kg Panel size: approx. 2.65 m² Colour top: raw Colour underside: white Note: - The chipboard is as good as new. Due to the storage, dust deposits may be present. - The chipboard does not have a spring. These are picked separately. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 16 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 3 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 38 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 7 kg
Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 4x available -Weight: 6 kg
Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg
Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg
geared motor, electric motor -Speed: 128 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Brake: 24 V -Quantity: 15x geared motors available Price: per piece -Dimensions: 390/130/H210 mm -Weight: 12 kg
Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake: 24 volts -Dimensions: 380/200/H145 mm -Weight: 17 kg
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 60 pos. tool taper: HSK A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,0 x 6,5 x 3,2 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: test probe: Heidenhain TS 640 tool mo ...
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° max. workpiecediameter: 850 mm max. workpiece height: 550 mm tool magazin:: number of toolpositions: 32 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 8,0 kg change-time chip to chip: 10 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Accelaration: 5 m/s² total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 5,0 x 2,9 m Documents: Chip conveyor: Coolantsystem: test probe: Heidenh ...
Gear motor, electric motor -Speed: 160 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 325/210/H195 mm -Weight: 13 kg
Gear motor, electric motor -Speed: 30.5 rpm -Power: 0.55 kW -Brake: 440 V -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 605/250/H215 mm -Weight: 36 kg
Gear motor, electric motor -Speed: 22 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H190 mm -Weight: 24 kg
Gear motor electric motor -Speed: 197 rpm -Power: 0.55 kW -Construction: hollow shaft angle B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 460/230/H170 mm -Weight: 20 kg
Filling machine for PFS and Cartridges in nest; for testing and small batches. Dimensions: 1,500ｘ 1,135ｘ 2,000 mm Max. Output: 4.800/hr Filling volume: 0.5 - 50 ml Supported package: 20/30/42/64/100/160 nest Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination. DFVN 1000 series is the smallest filling and stoppering machine by Groninger. Designed as a filling and closing machine for presterilized disposable syringes in nest for laboratories, test series and small batches. This semi-automated stoppering and filling machine offers processes identical to those of a high-output system. The machine supports manual nest handling under laminar flow. Clear separation between the manual handling section and the fully automatic production section.
With Jagfeed and Jackpack 40-2 Delivery
Dong Sung folder gluer Typ: 1FG-400 Farmacutical Age: 2002 Straightline 1 point gluing Barcode reader Free of damages. Available immediately
Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer
Gear motor, electric motor -Speed: 118 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 400/200/H200 mm -Weight: 12.5 kg
Gear motor, electric motor -Speed: 68 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 400/180/H200 mm -Weight: 21 kg
Gear motor, electric motor -Speed: 56 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 400/200/H195 mm -Weight: 15 kg
maximum number of results exceeded
please refine your search
