man tgl used for sale

MAN 32/40 Cylinder heads Augsburg type 11 pcs available froms stock in good condition std sized seat bores, free of cracks and weldings from our istanbul stock

volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAN 7L32/40 Crankshaft Std sized Free of cracks , weldings or oscillation Reports available

Exhaust gas compensator MAN D2842

MAN Gas Generator in Box Manufacturer : MAN Rated Output Power : 350 KVA Speed :1500 RPM Voltage : 400 V Frequency : 50 Hz Condition : Used Fuel : Gas Cylinder : 12 Cylinder Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd 00447956518924

Antike Stockpresse / Antique Spindle Press Chn. Mansfeld Serial-No. 14101 Pressfläche / Press Area max. 550 x 480mm Presshöhe / Press high max. 660mm Wunderschön verarbeitete antike Stockpresse  Beautifully crafted antique Spindle Press

SPECIFICATIONS: Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 Diameter Ø 90 mm Piston stroke mm: 470 Complete with intermediate plate Operation with water

V-belt pulley, pulley -V-belt pulley: 5-groove pulley SPC 200/5 with taper bushing -V-belt width: 22 mm -Receiver: Taper bushing manx 3535-65 Ø 65 x 90 mm (can be replaced) -Dimensions: Ø 210 x 135 mm -Weight: 18.1 kg

Pipe transport trolley, gas cylinder trolley, gas cylinder cart, steel cylinder cart, transport trolley -Manufacturer: Sumner Manufacturing, pipe transport trolley -Tires: Tubular tires -External dimensions: 1730/665/H680mm -Weight: 31 kg

Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PF 8/2 -Power: 0.07/0.27 kW -Speed: 680/2900 rpm -Wave: see photos -Protection rating: IP54 -Dimensions: 270/210/H235 mm -Weight: 12.7 kg

Bosch Injection Pump for MAN D2842 LE211 with GAC controller, cf. MAN part number: 51.11103-7451 59.11103-7451 N (l/min): 750 RW (mm): 12.7 or 13.6 EPP-FM (mm³/H): 332 or 367

Key data: 400 KW, 570 kVA, 400 V

Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued  ...

Mazak Manual Pulse generator HD52 DSM-0025-2E

Vitobloc 200 - MAN E2842 - Used - 401 kW - Gas generator

Holder for oil filter MWM 232 for sale Mann & Hummel Part Number: 6751283106 MWM Part Number: 2404242170

Make: MAN Model: 5L21/31 Mfg date: 2012.03 Output: 1000 kW Speed: 900 RPM Generator: Hyosung Corporation Type: HMD500-08 Output: 1175 kVA Voltage: 450 V Frequency: 60 Hz Quantity: 2 Weight: 5500 kg

Key data: 275 KW, 400 V

We offer for sale 2 units of MAN 3262E302 gas engines, rated at 275 kW. Both units are available immediately from stock after full payment. A Nidec generator is available as an optional extra. The MAN gas engine can be purchased separately, or supplied together with the Nidec generator as a complete GENSET for power generation applications. Price on request. An individual quotation will be prepared based on the required configuration and quantity. Additional technical information, photos, videos, and detailed equipment specifications can be provided upon request. Loading and transportation conditions are to be agreed individually. 2 UNITS AVAILABLE IMMEDIATELY FROM STOCK AFTER PAYMENT. NIDEC GENERATOR AVAILABLE AS AN OPTION – ENGINE CAN BE SOLD SEPARATELY OR TOGETHER AS A COMPLETE GENSET. PRICE ON REQUEST – PLEASE CONTACT US DIRECTLY FOR AN INDIVIDUAL OFFER.

TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 8L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Key data: 550 KW, 11000 V

MAN E3262 LE202 gas generators Year of make 2015 50 Hz 550 Kw at 1500 RPM 4 units available 2 units with 0 hours and 2 units with very low working hours Auxiliary equipment also available

MAN 18V51/60 new spare parts Brand new with 0 hours 18.900 Kw at 514 RPM Year of make 2019 Following spare parts available: 18 new pistons complete available 18 new cylinder heads complete available 18 new connecting rods complete available suitable for MAN 48/60  18 new liners available New Std sized crankshaft available suitable for MAN 18V48/60  18 new fuel pumps available 18 new Fuel Injection Valve Complete With Injection Nozzle available 1 new turbocharger available 18 new camshaft piece available

This 4-axis Mandelli RS1500U horizontal machining centre was manufactured in 2006. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,500 mm. The machine is equipped with a maximum spindle speed of 4,000 rpm and a tool capacity of 120. If you are looking to get high-quality machining capabilities, consider the Mandelli RS1500U machine we have for sale. Contact us for further details.

TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 6L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Reference ID PP-62399 Category 5-Colors Manufacturer Manroland Model 705+L Year Built 2005 Color 5 Impression 260 Working Hours - Speed - - Max. size 740 × 1,040 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Straight Machine (5/0) + Coater PPL Go4Colour Spectro System remote ink control monitoring density and Delta E Rolandmatic Delta alcohol dampening Technotrans ink temperature control and refrigeration AlcoSmart Chamber doctor blade coating unit IR dryer Eltosch Hot Air Dryer Eltosch Graphix Powder spray Extended delivery Impressions: 260 million Machine can be viewed currently in production.

Key data: 254 KW

Model: MAN E2848 LE322 Hours: 14,651 Year: 2010 Fuel: Natural Gas Capacity: 254 kW Hz: 50 V: 400 Scope of supply: Engine, Alternator, Frame, Control panel, Gas Line. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com

Inv. Num. : 8106 Type: TP1260M Producer: Le Mans Created: 2023 Parameters: Maximum power: 6.6 kW Length of profiles: 12000 mm Maximum workpiece weight: 1000 kg Maximum profile: HEB 240 mm Maximum pipe diameter: 380 mm

This 4-axis Mandelli STORM 1400 was manufactured in 2011. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a maximum spindle speed of 6,000 rpm and a tool capacity of 350. If you are looking to get high-quality machining capabilities, consider the Mandelli STORM 1400 horizontal machining centre we have for sale. Contact us for further details.

Elektro Gabelstapler / Eletric Forklift Manitou ME 315 Baujahr / Year 2017 - Serial-No. 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1500kg Lastschwerpunkt / center of gravity 500 mm Mit Ladegerät / with Charger Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

This 3-axis Mandelli R.S. M7U horizontal machining centre was manufactured in 2002. It features an X-axis travel of 1,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1,000 mm. The machine has a tool capacity of 100 tools and operates with a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mandelli R.S. M7U machine we have for sale. Contact us for further details.

This 3-axis Mandelli RS1500 U25 was manufactured in 2009. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,500 mm. The machine has a tool capacity of 120 tools and operates at a maximum spindle speed of 3,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mandelli RS1500 U25 horizontal machining centre we have for sale. Contact us for further details.

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

Impressions=50 m, Condition= , Availability= 2026-10-21, Rolandmatic dampening Colling and refrigeration

Impressions=55 m, Condition= , Availability= 2026-10-21, Description is coming

2007 5 Color Counter: 74 million Max. Size: 520 mm x 740 mm ProfitPlus Premium package - double sheet feeder - Baldwin washing unit - Complete carton guide - EPL Ergonomic Plate Loading Kersten antistatic system Register system Bacher Powder sprayer: Grafix 72 Digital Plus Alcosmart PressManager Smart Interface Smart R 200 Online Remote control: ink and register - RCI ColorPilot Smart Automatic wash up device: Ink rollers, impression cylinders, blanket cylinders Electronic sheet feeding control Nonstop delivery Control panel in delivery JobCard Reader Carton device Under power Located: Germany Available: immediately

Hydraulic power unit with radiator and tank REXROTH engine: 5.5 kW 400 V radiator Hydac OKA-R2 S/1.2/8/M engine:0.37 kW Tank: 115 l used ! Dimensions: 1100 x 1000 x 600 mm

Hydraulic pump MANNESMANN REXROTH 1PF2GU2-20/032REO07MU2 MO2 shaft Ø 32 mm Dimensions: 210 x 200 x 220 mm

Directional Control Valve, Hydraulic Valve MANNESMANN-REXROTH 4 WE 10 E31/CG24N9K4 588201/4 with 2 control solenoids GZ63-4 24V Dimensions: 295 x 115 x 75 mm

Pressure reducing valve, direct controlled, hydraulic valve MANNESMANN REXROTH ZDR 6 DP3-43/75YM 00410865 75 bar lockable ! Dimensions: 250 x 45 x 40 mm

Check valve, twin - Throttle check valve MANNESMANN REXROTH Z2FS 6-2-41/1QV Maximum pressure: 315 bar Opening pressure adjustable ! Dimensions: 155 x 45 x 40 mm

Hydraulic Pump MANNESMANN REXROTH 1PF2GU3-11/080RE07ME4 395225/6 R97607 shaft: Ø 40 mm New ! Dimension: 280 x 235 x 230 mm

Engine Brand: MAN, Conditie: USED, Bore: 128 mm, Stroke: 155 mm, Qty Cylinders: 6 Qty, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Orange , Working Hours: 2640 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 173 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/221642, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D2866-TE; Transport weight [kg]: 1250

Engine Brand: MAN, Conditie: USED, Nominal Power @ Nominal Rpm: 235 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 120 mm, Stroke: 155 mm, Engine Capacity: 10518 cc, Qty Cylinders: 6 Qty, Emission Certificate: EEV , Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 235 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/203673, , = More information =, , Type: Engine, Year of construction: 1010, Type number: D2066-LOH26; Transport weight [kg]: 1190

Engine Brand: MAN, Conditie: USED, Nominal Power @ Nominal Rpm: 235 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 120 mm, Stroke: 155 mm, Engine Capacity: 10518 cc, Qty Cylinders: 6 Qty, Emission Certificate: EEV , Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 235 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/203687, , = More information =, , Type: Engine, Year of construction: 1010, Type number: D2066-LOH26; Transport weight [kg]: 1198

Engine Brand: MAN, Conditie: USED, Nominal Power @ Nominal Rpm: 412 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 166 mm, Engine Capacity: 12816 cc, Qty Cylinders: 6 Qty, Emission Certificate: EURO 0 , Nominal Rpm @ Nominal Power: 2100 Rpm, Engine Cooling Type: Exchanger (on engine) , Engine Color: White , Working Hours: 1650 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 412 Kw, Rated Speed: 2100 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/catalog/product/view/id/221629, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D2876-LE402; Transport weight [kg]: 1650