130,400 used machines on RESALE, but how to find them? Machine Search
Switchgear, control, UV light, -Honeywell Rectification flame amplifier -unused in original packaging: 1 -used: 1 -Number: 2x available -Price: per piece -Dimensions: 130/90/H50 mm -Weight: 100 g
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg
Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg
Switchgear, control, UV light -Honeywell dynamic self- check ultraviolet flame amplifier -Voltage: 220/240 V AC 50 Hz -unused in original packaging: 4 -without original packaging: 1 -Number: 3x available -Price: per piece -Dimensions: 125/90/H50 mm -Weight: 100 g
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg
Brotschneidemaschine REX Gebrauchte - in Backereizustand - Technisch Gut - ab Lager - Preis auf Anfrage
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg
Board cutter - board shear Make Robust Model 1400 Year 1980's Cutting length 140 cm Details Iron cast table 100 cm, front lay+small cut device, back lay Available Direct
Sling and agitator Rego SM3 A used Rego SM3 stop and stirring machine is currently for sale and immediately available in our warehouse. Stop and mixer Rego SM3 -revised and repainted -for max. 30 liters -with automatic run via timer -manual run -stirring and beating
Stop and mixer Rego SM2 used Rego SM2 stop and mixer reworked and repainted is currently for sale and immediately available in stock. - for max. 20 litres - with automatic run via timer - manual run - Stirring and beating - repainted - many parts renewed
Used steam boiler made by Roucka, capacity 2.5 tons of steam per hour and pressure 9.2 bar. New 1994. Oil burner, control cabinet, fittings.
Seewer Rondo Cutting Line / Cutting Table Type: SPF602 with guillotine with multiple reels Strap width: 64cm, very good condition Stainless steel cladding on castors Dimensions: Height: 185cm Width: 660cm Depth: 80cm
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: Ø 50/H445 mm -Weight: 6 kg
Hydraulic pump, oil pump, gear pump -Power: 0.8 kW 1370 rpm -Protection class: -Dimensions: Ø 154/H485 mm -Weight: 26 kg
Siemens Simatic Portal Reader Wide Range Power Supply - 4 x Siemens Simatic RF660A - 1 x Siemens Simatic RF660A Portal Reader - 1 x ES 001 Wide Range Power Supply - 2 x Simatic RF680R - 1 x Siemens Wide Range Power Supply - 1 x Simatic RF 660R Portal Reader - 1 x Simatic RF 680A - 1 x Simatic RF 620A
Electric motor with hydraulic pump for sale. Engine characteristics: Type: 280S/M-4 Power: 85kW n: 1780 1/min Pump characteristics: n: 1760 1/min Pressure 450 bar Other hydraulic accessories available.
x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: volts -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg
Rego stop and mixer Type: SM 3 30 liter boiler Stainless steel boiler with whisk Raising and lowering boilers mechanically easy cleaning due to smooth outer surfaces Weight of the machine approx. 280 kg Stable and Robust 220/380 V – 2 kW – 6,9/ 4 A New ball bearings, new belts, new ball head, new electronics, repainted Dimensions: Height: 160 cm Width: 60 cm Depth: 70 cm
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg
Flexipak rotary pot sealer Serial: 1270 2013, stainless rotary pot sealer, twin station sealer, previously used to seal a 60mm diameter pot, also comes with plate for an 80mm square pot, adjustable temp controls, with foot pedal, 1Ph
Teaching or test bench for hydraulic components with all accessories for sale.
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm -Weight: 8.9 kg
VACUUM STUFFER, VEMAG ROBBY 2, TYPE: 135 Technical description: Serial number: 135.0243 Filling capacity: depending on the feeding element up to 3000 Kg/h Portioning speed: up to 650 portions/min (depending on product, casing and portion size) Power supply: (220-240 V, 27-35 A)-(380-460 V, 15-20 A) 3 Ph, 50/60 Hz Dimensions: 1000 x 900 x 2020 mm
Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg
Centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. Delivery rate: 2.0 m³/h -Max. H: 14.5 m -Motor power: 1.97 kW -Speed: 2840 rpm -Quantity: 1 piece available -Dimensions: 380/205/H285 mm -Weight: 33kg/
Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg
SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller
RYOBI 754P , 2x2 PLATE RUNNING 765 X 545 PLATE MAX 78 X 60 Year 2007 Imp 30 Mio Perfecting - Automatic Automatic Rubber And Color Washers Autoplate IR-dryer Material thickness 0,04 - 0,6 mm No Damages On Cylinders And Gears
Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK
Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph
It is a used, reconditioned Rego stirring and beating machine SM 2 (20 liters) for sale. The speed of the machine is infinitely adjustable. With automatic running of the timer, bowl height adjustment by crank revolution. Electrical conversion from beating to stirring, real deflection due to stationary shaft. The machine has a new stirring head, has been completely re-mounted and painted. It is in very good condition and runs very smoothly. External dimensions: width: 60cm, depth: 50cm, height: 140cm Incl. bowl, stirring tool, beating tool. Price on request.
4 pieces of hydraulic pump flanged to electric motor complete with accessories on Euro plate for sale. Characteristics pump Rexroth A10VSO 28 DR / 31 R Vg: 26cm3 DR: 240 Bar n: 1750 1/min Engine characteristics: Hatlapa 180M -4 Power: 21kW Other accessories: - 1 piece Blitz pressure vessel 40 liters / 16 bar - 2 Hydac filters, 25 bar - 2 pieces hydraulic pump - see photos for more
Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data
Ryobi 522HE year 2008 Impressions 22 mil Semi-Automatic plate change, Technotrans Refrigeration, Automatic Blanket Cylinders & Inking Rollers washing devices Powder spray, Double Sheet & Side lay Detector Numbering and Perforating unit
Size: 570 x 330 x 60 mm, speed: 1.600 c/h, 8 clamps, hotmelt spine gluing unit, hotmelt side gluing unit, milling and roughening station, cover station, pressing station, delivery
Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery
diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ
Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW
Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.
Sachman RP3 milling machine :::SPECIFICATIONS::: CNC Model: Heidenhain CNC version: TNC 426 Head type: Manual bi-rotary head Tool connection: iso 50 Spindle power: 15Kw Number of spindle revolutions: 3000 X Shaft Stroke: 2500mm Y-axis stroke: 800mm Z Axis Stroke: 950mm Table dimensions: 2700 x730mm Guides: flat Type of cutter: fixed bench Mechanical range change: yes :::D IMENSIONS AND WEIGHT::: Length: 4500mm Width: 3736mm Height: 2775mm Weight: 12500Kg
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg
Unused Bosch Rexroth axial piston pump. See photos !
Unused Rexroth MCR5H565ZZ33A0M1L01SO533C hydraulic drive
maximum number of results exceeded
please refine your search
