man roland r used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.

General SKU215X090 MakeVMI Rayneri TypeDYNAVAR SB 25 No.129542 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length1300 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1300 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft350 — 1750 rpm MaterialStainless steel 1.4306 (304L) Information Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X951 MakeMonTech LocationBarneveld CEcheck TypeD-RPA 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine Electric capacity230 V MaterialStainless steel Information No.090 KA 666 Year of construction2019 With switchcheck Floorspace0,70 x 0,55 m Total height1,52 m Extra Specifications Machine type: MonTech D-RPA 3000 Dynamic Rubber Process Analyzer (RPA) / advanced rheometer for rubber &: polymers (QC and R&:D). Use: measures viscoelastic and curing behavior (e.g., G’, G’’, tan δ, viscosity, cure kinetics) under controlled temperature, strain and frequency. Temperature range: ambient to 232 °C. Frequency range: 0.001–100 Hz. Strain range: up to 360° (very wide dynamic range). Torque range: up to 250 dNm. Sample volume: approx. 4.5 cm³ (sealed biconical die system). Utilities (typical): compressed air min ...

General SKU400X1191 LocationBarneveld CEcheck MakeKühner Main Features MaterialStainless steel Volume186 Ltr. Motor0.95 KW Specified Features - Drying oven Climate boxcheck Max. temperature—15 / 80 °C Number of compartments:1 Capacity186 Ltr. Internal width580 mm Internal depth596 mm Internal height538 mm Electric heatingcheck Electric capacity0,95 kW 230 V Number of doors:1 MaterialStainless steel Information TypeLT-X No.67001.007 With switchcheck Floorspace0,855x0,804 m Total height0,841 m Weight100 kg Extra SpecificationsWith shaker: speed: 20–500 rpm: plate dimensions: 420 × 415 mmDrying ovensKühner AGDryers > Drying ovensBrand > Kühner AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU311X478 MakeRiera Nadeu LocationBarneveld CEcheck TypeRina 700F 800X400 PI Main Features MaterialHastelloy Motor37 KW Inlet diameter100 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesø 800 mm Max. loading weight125 kg Motor37 kW (400 V, 1480 rpm, (Ex)) Max. basket speed2150 rpm Hydraulic operatedcheck With hydraulic unitcheck InletDN100 Solids outletDN150 Liquid outletDN100 MaterialStainless steel 2.4602 (Hastelloy C-22) Information No.10573 / P19 / 00718 Year of construction2020 Mounted on foundation platecheck Floorspace2,626 x 2,250 m Total height1,930 m Weight8900 kg Extra SpecificationsProduct density 1250 kg/m3, G force 2000 G, :Peeling centrifugesRiera NadeuCentrifuges > Peeling centrifugesBrand > Riera Nadeu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

General SKU279X363 LocationBarneveld MakeRosenmund Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Motor6.8 KW Surface0.22 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,22 m² Capacity175 l. Vessel sizesø 750 x 900 mm Vessel can be tiltedcheck Top connectionscheck Solids outletDN200 With jacketcheck Max. temperature—20 / 200 °C With stirrercheck Motor6,8 kW (380 V, 1450 rpm) Stirrer can be liftedcheck MaterialStainless steel 1.4539 (904L) Information TypeRPD 0.2-623-91 Mach.No.2471 Year of construction1991 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,00 x 1,17 m Total height2,60 m Weight2000 kg Extra SpecificationsWith Single tempering unit, type SKA-12-L, 24 bar, 14,5 kVa.Nutsche filters ...

General SKU397X1167 LocationBarneveld MakeGAF TypeRB 4ASL Pressure Working pressure10.5 Bar Main Features MaterialStainless steel Volume179.4 Ltr. Surface1.96 m2 Specified Features - Candle filter Candle filtercheck Notified bodyTüV Filter surface1.96 m2 Number of candles4 Candle sizesDia. 165x730 mm Liquid outletDN25 Max. temperature150°C Top connectionsDN25 MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Information No.96 Year of construction1989 Mounted on framecheck Mounted on legscheck Floorspace1,06x0,91 m Total height1,36 m Weight212 kgCandle filtersGAFFilters > Candle filtersBrand > GAF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU400X1194 LocationBarneveld CEcheck MakeKühner Main Features MaterialStainless steel Volume186 Ltr. Max.temp.80 °C Specified Features - Drying oven Climate boxcheck Max. temperature—15 / 80 °C Number of compartments:1 Capacity186 Ltr. Internal width580 mm Internal depth596 mm Internal height538 mm Electric heatingcheck Electric capacity0,95 kW, 230 V Number of doors:1 MaterialStainless steel Information TypeLT-X No.67001.6 With switchcheck Floorspace0,86 x 0,81 m Total height0,82 m Weight100 kg Extra SpecificationsWith shaker speed: 20–500 rpm and plate dimensions: 420 × 415 mmDrying ovensKühner AGDryers > Drying ovensBrand > Kühner AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU400X1192 LocationBarneveld CEcheck MakeDometic Main Features MaterialStainless steel Specified Features - Freeze dryer Freeze dryercheck Number of plates5 Plate sizes600x450 mm With cooling compressorcheck MakeDanfross TypeFR8,5GXNO Cooling mediumR134a Motor21 watt, 220-240 volt MaterialStainless steel Information TypeLR 400 No.8471181 With switchcheck Floorspace0,85x0,80 m Total height1,92 m Extra SpecificationsVolume 489 l.Freeze dryersDometicDryers > Freeze dryersBrand > Dometic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU397X1081 LocationBarneveld CEcheck MakeBusch Pressure Working pressure0.001 Bar Main Features MaterialStainless steel Volume160000 Ltr. Motor7.5 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheck Number of pumps:1 With motor7,5 kW, 380 V, 1800 rpm, (Ex) Inletø 55 mm Outletø 25 mm Information TypeRA0165 D 5EC ZZZZ Mach.No.C1109000050 Year of construction2011 Floorspace1 x 0,90 m Total height0,85 m Weight300 kgVacuum pumpsBuschPumps > Vacuum pumpsBrand > Busch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

- Premium Line self centering extra compact - Integrated cylinder - Sealed body - Chip guard with coolant nozzles - Stroke control with proxi switch - Roller for in arm not included

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - / Contact us at -

A Rösler continuous belt shot blasting system is available. Rated power: 72kW, abrasive filling quantity: 1500kg, blasting capacity: 600kg/min, blast wheels: 4, blast wheel type: H28HM, total system dimensions X/Y/Z: approx. 12400mm/3800mm/2300mm, max. single component weight: 6000kg. Documentation available. An on-site inspection is possible.

Brand: Raiming Rmito-120 Power, kW: 120 Number of phases: 3 Engine Type: Diesel

Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01.

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Key data: 1020 mm, 2 mm

with bending rail 10 and 19 mm, additional segment insert for the upper beam (segment height 60 mm) and Material thickness adjustment, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: green Machine weight: 350 kg Opening width: 150 mm Bending angle (max.): 130 degrees Machine number 16/9

Industrial belt conveyor unit suitable for material handling and internal transport in production, warehouse, or packaging environments. The conveyor is mounted on a stable steel framewith adjustable feet and is equipped with an electric drive and control panel for reliable operation. The conveyor features a flat belt with side guides, allowing safe and controlled transport of goods. Speed ad operation are managed via the control box mounted on the support column. The unit is designed for continuous industrial use and can be integrated into existing production lines. Construction: Steel frame with adjustable supports. Drive: Electric motor Control: Control panel included Belt type: Flat belt conveyor

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

General SKU397X1150 LocationBarneveld CEcheck MakeRichter Pressure Working pressure16 Bar Main Features Motor7.5 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 With motor7,5 kW 380 V 2900 rpm (Ex) InletDN 50 OutletDN32 Centrifugal Pumps MaterialPFA coating Information TypeMNK-XB/F 50-32-160 Mach.No.959813 Year of construction2004 Floorspace0,99 x 0,36 m Total height0,35 m Weight200 kg Extra SpecificationsAccording to the documentation, the pump set may be used in potentially explosive atmospheres and is classified as ATEX II 2G, temperature class T1–T4 (motor Ex de IIC T4).Centrifugal PumpsRichterPumps > Centrifugal PumpsBrand > Richter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

For Sale: Complete MIMOT SMT Assembly Line with Rommel Conveyor System Manufacturer: MIMOT Conveyor System: Rommel Available as a complete package Machines and Equipment 1 x MIMOT MB200 - Year: 11/2013 - Configuration: 2 x 5-needle heads - Double tool changer with 40-tray changer 1 x MIMOT Placement Machine Advantage - Year: 02/2004 - Configuration: 2 x 5-needle heads - Conveyor and Handling Equipment 4 x MIMOT MT60 conveyor belts 1 x MIMOT EASY transport and buffer station 1 x Rommel BM600S conveyor belt - Including loader and unloader Accessories and Spare Parts - 373 electrically driven feeders in various widths - Multiple feeder carts - Extensive MIMOT spare parts package Condition - Complete production line - Well maintained - Available immediately Find more here - / Contact us at -

Technical data for the pallet racking system: Shelving system: Feralco Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 22,455 mm Number of fields per row of shelves: 08 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 09x Pallet rack stand, used Material colour: sendzimir galvanised Type: 20 M Profile size: 95 x 60 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 2,550 mm high 1,250 mm deep 32x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss type: 80 E15 Agraffe: 3 HK (hook) Clear width: 2,700 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 64x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members aga ...

Power: 360 kW (489.46 hp) Fuel Type: Diesel Dead weight: 20,800 kg Maximum load capacity: 5,200 kg Axle configuration: 6x4 Color: Red Equipment: HIAB 288 HYDRAULIC LIFT, RAILWAY UNDERCARRIAGE

Diesel Generator 8kW 230V 50Hz Weight 530kg

General SKU368W1089 LocationBarneveld MakeRegloplas Pressure Working pressure5.8 Bar Main Features Heating (medium)Oil Capacity5.1 KW Temp.150 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Thermal oil heatercheck Electric heatingcheck Heating medium:Oil Heating capacity4kW Electric capacity5.1 kW With coolingcheck(without cooling compressor) Temperature150°C Tank capacity8 dm³ With pumpcheck Capacity50 l/min With temperature controllercheck Information Type150KL/4/TB22/1K Mach.No.129113 Year of construction1989 Mounted on wheelscheck With switchcheck Floorspace0,33 x 0,80 m Total height0,93 m Weight54 kgTemperature control unitsRegloplasHeat exchangers > Temperature control unitsBrand > Regloplas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

General SKU326X675 MakeRussel LocationBarneveld CEcheck Type14550 Main Features MaterialStainless steel Surface0.07 m2 Sizes diameter300 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,07m² Number of sieve decks:1 Sieve sizesDia. 300 mm InletDia. 250 mm OutletDia. 50 mm Drive vibro motorcheck Motor0,5 kW, 230/400 volt, 3000 rpm MaterialStainless steel 1.4301 (304) Information No.51004 Year of construction2007 Mounted on mild steel framecheck With switchcheck Floor space0,45x0,60 m Total height1,10 m Weight50 kgVibro sievesRussellSieves > Vibro sievesBrand > Russell What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...

General SKU202X016 MakeABL Anlagentechnik/ OFRU LocationBarneveld TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Distillation Capacity510/55l Information No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgearcheck ( as is) ATEX compatiblecheck Extra SpecificationsWas used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as wellDistillationOFRUColumns > DistillationBrand > OFRU ...

General SKU406S1038 LocationBarneveld MakeBallerstaedt & Co. Rastatt (D) TypePOLYMAT-VARIOSEAL PN Main Features Inlet diameter90 mm Number of1 heads Specified Features - Capper MaterialStainless steel Single headcheck Suitable forplastic and glass containers Number of closing heads:1 Without motorcheck Manual operatedcheck CapacityDepending on the skill of the operator up to 700 sealing/h. Suitable for bottle/jar dia.90 mm Suitable for bottle/jar height375 mm Information No.71.9615.011.1000 Year of construction1996 With switchcheck Floorspace0,6x0,4M Total height1 M Weight50 KgCappersBallerstaedt RastattPackaging machines > CappersBrand > Ballerstaedt Rastatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU366W1219 LocationBarneveld MakeQVF Glasstechnik Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity100 l. Vessel sizesdia. 600x700 mm Top connectionsDN150 OutletDN40 Information TypeVSV100 No.B2.32 Floorspace0,60x0,60 m Total height1,1 m Extra SpecificationsWith Endress + Hauser temperature gauge, (Ex)Vertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU237W266 LocationBarneveld CEcheck MakePhartec Krause Main Features MaterialStainless steel Motor4 KW Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Miscellaneous filters CapacityPermeability 700 l/h CapacityConcentrate discard 300 l/h Information TypePhartec RO600-2 St Year of construction2001 Floor space2,0 x 0,80 m Total height1,75 m Weight650 kg Extra Specifications- water quality 3,0 µS - control cabinet as is - Grundfos water pumps, type CRN 3, cap. 3 m3/h, 2,20 kW - Grundfos water pumps, type CRN 2, cap. 2,5 m3/h, 1,50 kW, - 2 filters -6 pressure pipes Miscellaneous filtersPhartec KrauseFilters > Miscellaneous filtersBrand > Phartec Krause What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU252W328 MakeFryma Koruma LocationBarneveld CEcheck TypeVME-120/C Pressure Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor15 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity226 Ltr. (netto 120 Ltr.) Vessel sizesDia. 900x650 mm Dished bottomcheck Hollow bottomcheck Flat top sidecheck With covercheck Top connectionscheck Outlet2x 40 mm, 1x 80 mm With jacketcheck Volume 28 ltr. Max. temperature140°C With anchor stirrercheck Motor3,0 kW, 400 volt, 1410 rpm Speed mixing shaft27 rpm With homogenisercheck Motor15 kW, 1460 rpm Information No.100497 Year of construction2002 Mounted on legscheck With switchgearcheck (as is) Floorspace3,45x1,50 m Total height2,10 m Weight2000 kg Extra Specifications- With hydraulic unit.  ...

General SKU381U1028 MakeThermo Haake Polylab system/ Reomix LocationBarneveld CEcheck TypePolyLab 300p / 557-9310/1302 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Viscosity test machine Viscosity metercheck Motor7,5 kW, 230/400 volt Variable speedcheck Speed0-250 rpm With kneadercheck TypeThermo Haake Rheomix Typ 577-1302 No.1200503234002 Electric heatingcheck MaterialStainless steel 1.4301 (304) Information No.1200301096002 Year of constructionunknown Floorspace0,44x1,32 m Total height1,10 m Weight259 kg Extra Specifications- Thermo haake polylab system TYP 577-9310 - Thermo haake Rheomix TYP 577-1302 - With extra set cam rotors for Rheomix Rheocord, type 300P, speed range 2-200 rpm, torque range 0-300 Nm Bench, type 300, cooling for measuring systems 3, Connections for Die heaters 4, Connections for melt temperature measurements 5, C ...

General SKU251U345 MakeGaf Filter Systems TypeRBN-1602-ACF06-D080D-00GDH-M No.12253 Year of construction1999 Mounted on framecheck Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface7.84 m2 Specified Features - Candle filter MaterialStainless steel 1.4571 (316Ti) Candle filtercheck Notified bodyTüV Filter surface7,84 m2 Number of candles16 Candle sizesDia: 183x585 mm Liquid outletDN80, DN50 Max. temperature170ºC Top connectionsDN50, DN1/2 Capacity908Ltr/ 980 kg Vessel sizesDia:1100x1070mm With jacketcheck 63 ltr Information LocationBarneveld Floorspace1,6x1,6 mtr Total height2,2 mtr Weight980 kgCandle filtersGAFFilters > Candle filtersBrand > GAF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...

General SKU212T478 LocationBarneveld CEcheck Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408 Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Information MakeAPV TypeW-25/200-380 Mach.No.922145040915360000 Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T485 MakeAPV TypeW-25/200-380 LocationBarneveld Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m³/h With motor30 kW 380-690 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T486 LocationBarneveld CEcheck MakeAPV Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m³/h With motor30 kW 380-690 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information TypeW-25/200-440 Mach.No.92214540915360000010 Year of construction1997 Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU040F329 TypeSigma 17 RBL No.61/56219/06 Year of construction1990 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface4.4 m2 Size length190 mm Sizes width850 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangers(1x) make Schmidt Bretten GmbH Heating surface4,4 m2 Capacity6,5/6,0 Ltr Number of platens26 Plate sizes± 190x850mm Connections4x dia. 40mm Max. temperature100 Degr. C. Information Floorspace0,6x0,3 M Total height1,1 M Weight170 KG Technical specs Extra informationindicated size is platen sizePlate heat exchangersSchmidtHeat exchangers > Plate heat exchangersBrand > Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1300 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible.

sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter capacity: 121 m² Air consumption: 13200 m³/h ventilator: 15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grafisk Maskinfabrik - Slitter Rewinder LS-350 Working width: 350 mm Connection voltage: 400V, working width: 350 mm, Supply voltage: 400V

pressure: 200 t table length: 2200 mm table width: 1550 mm dayligth: 2200 mm ram return capacity: 6.000 kg table load capacity: 10.000 kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 4 7 7 m Packing: ca. 13,4 x 3 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: ca. 1500 mm width: ca. 700 mm height over floor: ca. 840 mm : 2 St. With 2 drawers, interior height approx. 140 mm and 2 storage compartments, door height approx. 380 mm Mobile on casters, casters can be lowered so that the table remains stable when working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grindable diameter from 2 - 40 mm. Smallest and largest point angle: 40 – 180 °. For right- and left-hand cutting tools, 1-12 cutting edges. For sharpening twist drills, step drills, taps. Accessories and an instruction manual are provided.

We offer a variety of control cabinets, one-, two- and three-door. With equipment (relays, automation, switches, UPS, etc.) I can send photos of all 50 cabinets by email. The price is negotiable.

Varidamp dampening Ink unit temperature control Full automatic plate changer (FAPC) Cooling and recirculation (Technotrans Beta.c 280G) Non-stop Delivery Perfecting 8:0/4:4 Non-stop feeder Powder exhauster Antistatic feeder Powder sprayer (Eltosch PowderMax) SIS-Sensoric Infeed System Ergotronic console (+ Wallscreen) Drivetronic SPC (Simultaneous Plate Change) Plate Ident ErgoTronic ColorControl QualiTronic ColorControl (+ Colorview) Water cooled peripherals CleanTronic Synchro - Parallel washing of rollers and blanket ErgoTronic LAB

Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible.

Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power.

Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.