man roland r used for sale

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -

grinding length: 7500 mm grinding width: 1400 mm workpiece height: 1700 mm column daylight: 1850 mm table surface area: 7705 x 1250 mm workpiece weight: 15 t table speed -stepless-: - m/min grinding motor: - kW turning speeds: - U/min total power requirement: - kW weight of the machine ca.: 72 t dimensions of the machine ca.: - m Machine is equipped with: - Double grinding head -- Grinding wheel on the right and left of the main spindle -- Each side can be swivelled through 90° -- Thanks to the special grinding head, there is no need to change or profile the grinding wheel when prism or V-groove grinding - Separate underhand grinding support - Automatic grinding wheel dressing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rego stop and stirring machine Type: SM 4 for 30 + 40 litre boilers with boiler lighting Raising and lowering boilers mechanically Easy cleaning due to smooth outer surfaces Weight of the machine approx. 330 kg stable and robust 220/380 V – 2 kW – 6.9/ 4 A New ball bearings, new belts, new ball head, new electronics, repainted Dimensions: Height: 170 cm Width: 60 cm Depth: 70 cm

Rheon Cornucopia Type: KN200 Pieces of dough: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on castors Height: 160cm Width: 80cm Depth: 150cm

A fully automatic cellophane wrapping machine is available. Packaging capacity: approx. 65cycles/min, folding box length range: 40mm-120mm, folding box width range: 40mm-120mm, folding box height range: 20mm-75mm, film types: PP/BOPP, machine dimensions X/Y/Z: approx. 1550mm/850mm/2200mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces

Item Condition: In Operation Availability: immediately Availability: immediately Viewing: by arrangement Location: Germany / Essen Technical data: see picture 3

Mitutoyo 570-313 Digital Height ruler

Round stack feeder 4 pockets 2xSword 1xSide pocket Press delivery

Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.

Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motorized backgauge with hinged cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 controller Segmented upper beam tool with automatic tool clamping (height 100 mm) Operating instructions Weight: 5800 kg

working width: 1150 mm working area:: 5700 m²/Std. total power requirement: 3,0 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,6 x 1,2 x 1,6 m Sweeper with charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used wagon furnace system with 2 x wagon furnace Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 x boiler Heuft HK 200, Fabr.-Nr. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 shelves per trolley/oven, shelves each 18.5 cm high, with br. Weishaupt oil burner, external dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions kettle: 105 cm wide, 170 cm deep, 200 cm high, in baker's condition, ran perfectly until the end

PostProcess RADOR™ – Automated surface finishing for 3D printed components, The PostProcess RADOR™ is a professional post-processing machine for the automated surface treatment of additively manufactured components. It was specifically developed for industrial use and enables reproducible, uniform smoothing of plastic and metal parts – entirely without manual post-processing., The RADOR is equipped with the patented “Suspended Rotational Force” (SRF) technology and offers a closed system for reliable, controlled grinding processes with high throughput., ---------------------------------------------------------------, Highlights of the RADOR™, - Automated surface processing: Uniform smoothing and deburring through rotating machining with grinding media in liquid – fully automatic and process-reliable., - Compatible with various 3D printing technolog ...

Type : R60 - 50 Capaciteit: 3500 kg zijverschuiving

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

Besturing: Siemens Sinumerik (achteraf ingebouwd) Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Longitudinal travel X-axis (autom.): 610 mm Cross-travel Y-axis (autom.): 1310 mm Travel Z-axis (autom.): 565 mm Dimensions of the table: 1215 x 1250 mm Dimensions magnetic table : 1250 x 500 mm Distance between table -- spindlecentre: 680 mm Spindlespeeds: 0 - 2800 rpm Motorpower: 15 kW ACCESSORIES: yes Cooling system: yes

Rego SM 4 RMT stop overhauled Rego Model: SM 4 RMT overhauled with automatic timer The machine when it comes to striking! 2 working functions: 1 x stirring / 1 x beating Working shaft/stirrer shaft reworked Powerful and robust technology Boiler lighting EMERGENCY STOP protection circuit Easy to use Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Fat Baker Riehle Wendomat 48 Riehle Model: Wendomat 48 Immersion basket for max. 48 pieces Dispensing Device Manual 1 stainless steel proofing trolley with tilting frame Temperature controller with safety thermostat Steam lid, drainer tray Output approx.: 480 pcs/h Stainless steel version, mobile Connection 400V, 16A-CEE plug Occasion

Automatic creasing/perforation for formats up to 630 mm x 330 mm, manual system, table model

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS & FREUDENBERG Description: Dewatering Screening Machine Type: "Roberg" 1600/5000/1 Available devices: 2 pcs identical Year of manufacture: unknown (90s) Screen length: 5,000 mm Screen width: 1,600 mm Number of screen decks: 1 pc. SPECIFIC COMMENT - No cracks, no deformations - Incl. outlet tray, drive and springs

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Type: 5.5 Year: unknown (80s) Gripper capacity: 5.5 cbm Hoist: 2 x 120 kW Gearbox Type: HD 236 (Mannesmann Demag) Screening machine: Främbs&Freudenberg ECK 1500/5000/1 SPECIFIC COMMENT - In need of repair and overhaul! - Incl. MRS gripper 5.5 cbm - Incl. cat with hoist - Pontoons dry

SERAIL RP2V freeze dryer sold with a vacuum pump, Tank volume: 10 Liters

Submerged Wire erosion machine CHARMILLES ROBOFIL 440 CC, Information about technical data are not binding., Machine available subject to prior sale., X-Y-Z axes travel: 550x350x400 mm, U-v axes travel: 550x350 mm, Taper angle: ± 30°, Automatic wire threading and rethreading: yes, Maximum workpiece dimension: 1200x700x400 mm, Cnc: CHARMILLES, Total volume of dielectric: 1200, Filter type: Cartridge, Weight: 3.500 Kg, Accessories: Chiller unit

grinding length: mm grinding width: mm workpiece weight: kg workpiece height: mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____________________________________________________________ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed ...

Rieber WE-H Tube Stacker For heating, stacking and transporting a wide variety of tableware in restaurants, hotels, catering and communal catering Swap forklift made of CNS, payload max. 150 kg, with multifunctional lattice platform for different sizes of dishes, guided without tipping and misleading. Spring force adjustable. Stainless steel castors according to DIN 18867, Part 8, wheel diameter 125mm, 2 swivel castors, 2 swivel stop castors Shaft dimensions: 590 x 290 mm Thermostat controller +30 °C to +110 °C. Nominal voltage 1N AC 230V 50 Hz Weight: 55 kg Manufacturer's price 3013,- € More items - new and used - can be found in our shop! International shipping costs on request!

1 x Used ILLIG RDM70K PP-Mold for 8-Cavity, Rectangular Containers 145.5 x 65.3 x 41 mm age December 2007. Product drawing is attached.

turning diameter over bed: 1020 mm turning diameter over slide rest: 660 mm turning length: 5000 mm min./max workpiece dia.: 210 - 880 mm spindle diameter: 115 mm spindle taper: 140 spindle turning speed range: 5 - 500 U/min feeds - longitudinal: 0,20 - 3,05 mm/U feeds - cross: 0,07 - 1,04 mm/U slide adjustment: longitudinal: 5000 mm cross: 680 mm workpiece weight: 5000 kg main drive motor: 22 kW thread - mm pitch: 1 - 120 mm thread - module: 0,5 - 30 thread - inch: 28 / 1/4 spindle bore: 84 mm tail stock: tailstock quill taper MT: 5 tailstock quill stroke: 300 mm total power requirement: 27 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: 6,5 x 2,2 x 1,8 m - 1 fixed bezel - Faceplate Ø 1000 mm - 4-fold steel holder - Tailstock - 2-track bed design The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t clamping width: 480 / 880 mm adjustment range - horizontal: 400 mm adjustment range - vertical: 600 mm total power requirement: - kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,60,41,1 m Shipping weight: 300 kg Packing: ca. 1,2 x 0,7 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.

Manufacturer: Reichenbacher Model: ECO RS3 Year of Manufacture: 2016 Type of Machine : 5 Axis Milling Machine CE Certified: Yes Find more here - / Contact us at -

Manufacturer: Rasco Model: SO1800T Year of Manufacture: 2007 Power Supply: - 400V 3 / N / PE - 208V 3 / PE - 230V 1 / N / PE - 50–60 Hz - 6 kW Air Supply: 6 to 10 bar Exterior Dimensions: - Width: 37.008 in (94.0 cm) - Depth: 43.307 in (110.0 cm) - Height: 88.583 in (225.0 cm) Weight: 871 lb (395 kg) Find more here - / Contact us at -

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm

A compact, effective and powerful system for the separation of light residues. The adjustable suction head can be mounted directly on a conveyor belt or above a star screen deck. The MM Air 22 air classifier is designed for maximum impact, ease of installation and reliability. The MM Air 22 air classifier has the following features: 22 kW highly effective suction unit with belt drive Built-in electric control panel Variable speed control Air flow rate up to 266 m³/min Large doors for easy maintenance and cleaning Reinforced fan wheel and suction chamber Universal conveyor belt attachment There can be two suction heads on the machine can be attached Vacuum head: Suction head suitable for a bandwidth between 800 - 1200mm Easy to assemble and stable while working 400mm air hose connection to MM-Air 22 Electric Suction Fan Unit: Length: 1850 mm Width: 1323 mm Heigh ...

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour frame: Ral 5015 blue Material colour half-timbering: sendz. galvanized Frame profile: PLFB 30 Profile dimensions: P 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,250 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Müstang demolition pulverizer RH16, - with 360° rotator, - 1500 kg dead weight, - for 12 - 20 t excavators, - Year of construction 2025

Müstang demolition pulverizer, NEW!, Year of construction: 2025, 1050 kg, Suitable for 9-16 t excavators

Schäffer 5470Z wheel loader, Technical data:, - Year of construction: 2022, - Operating hours: 450h, - Operating weight cabin with standard equipment, driver and standard bucket: 5,215 kg, - Lifting capacity: 3,600 kg, - Flow rate / option: 64 l/min / 74 l/min, - Pressure: 210 bar, Equipment:, - volume scoop, - pallet forks, - hydraulic quick coupler, Dimensions [see image in attachment]:, - (A) Wheelbase: 2,050 mm, - (B) Chassis length: 4,700 mm, - (C) Total length with standard bucket: 5,250 mm, - (D) Digging depth: 80 mm, - (E) Working height max.: 3,900 mm, - (G) Loading height with pallet forks: 3,120 mm, - (H) Max. discharge height: 2,500 mm, - (I) Height of front end: 1,530 mm, - (J) Dumping range: 420 mm, - (K) Seat height: 1,340 mm, - (L) Height cabin / option: 2,570 / 2,450 mm, - (M) Lifting height (tool pivot point) max.: 3,250 mm, - (N) Total width series / option: 1,740 - 1 ...

Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm

NEW, 2 pieces,, Tire spec: 335/80R18, Store (pieces): 4

PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm

NEW, Year of manufacture 2024, Suitable for 7-14t excavators

test

BIG CVH 150 Sanitary Container, Dimensions:, 3x2m, Domestic equipments:, - Shower, - WC, - Washbasin

BIG conveyor belt, Dimensions:, Length: 800 cm, Width: 65cm, with chassis

GB 800 / 7.5 / 23200, 7500mm tape length, 780mm belt width