man roland r used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Rexroth, pneumatic cylinder type 521 175 001 0 -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Dimensions: 230/52/H52 mm -Weight: 1.7 kg

Gearbox, spur gear, angle gear, worm gear -Manufacturer: Ruhrgetriebe, gearbox type SN 3 B -Translation: i= 12 : 1 -max. torque: 13.5 Nm -Shafts: Ø 12 x 30 mm -Number: 3x gearbox available -Price: per piece -Dimensions: 130/114/H75 mm -Weight: 0.9 kg

S. No.: 1139 // Print counter (m): 66,6 // Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...

pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4" Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

Fettbaker Kippfix Roka Werk TW 36-E -with 10 tilting planks Pool dimensions: 50x88cm and 8.5cm high Dimensions: 218cm length 92cm height

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer:Röhm, two-jaw tapping chuck MK3 -Type: MK3 B24 -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg

Chassis, electric motor, DC motor, traction motor, drive motor order picking forklift, drive wheel electric pallet truck -Manufacturer: Linde, chassis from electric forklift R20 -Type: R20 2503 -Wheel mount: bolt circle Ø 115 mm M14 -Individual components: see photos -Dimensions: 560/460/220 mm -Weight: 36 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Dimensions: 430/400/H360 mm -Weight: 99 kg

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Price/Sale: complete -Dimensions: 430/400/H360 mm -Weight: 99 kg

Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes but the machine is sold with new tapes. - Belt width 64cm - with reel - With digital computer control

Printing machine Ryobi 512 H - Year of Make:2001 - 2 colors - Direct film dampening unit - Super damper - Shed Feeder - Landscape format: 36.5 x 52 cm - with plate punch - axe - Bacher plate system - With quick-plate tension rails - With Royse ECO-15 cooling unit - With voting table and lighting - Total revolutions: 23661330 - Printing number approx. 16 million printing - Very well-maintained machine - Fully functional

Servo motor, electric motor, DC motor, stepper motor, stepper motor Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 -Item No.: DS851026 -Shaft: Ø 14 x 37 mm -Number: 11 servo motors available -Price: per piece -Dimensions: 200/85/H85 mm -Weight: 4.1 kg/pc.

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Nucleus, control module -Type: DX1 ECO MC-DST-V15 rev.2 -Item No.: FE12003 -Number: 10 modules available -Price: per piece -Dimensions: 90/70/H115 mm -Weight: 0.3 kg/pc.

Semi-automatic bun-rounding press chops and rounds; divides dough into 30 pieces; power 380 V / 50 Hz/ 3; set includes 3 press plates

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Voltage: 24 V DC / 5.5 W -Number: 17 fans available Price: per piece -Dimensions: 205/205/H110 mm -Weight: 0.6 kg

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Mains filter for frequency converters, PLC control, mains filter, mains and motor choke, three-phase mains and motor choke -Manufacturer: REMO: Three-phase mains and motor choke -Type: L2254U62 -Nominal voltage: 3x440/250 V 25.0 A 50/60 Hz -Dimensions: 255/110/H55 mm -Weight: 1.5 kg

Vertical machining center FANUC Robodrill Alpha T14iA ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Vertical machining center FANUC Robodrill Alpha T21iC 2002 ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same workpiece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_oxide ...

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector, SOLD - more available in stock, VENDUTA - altre disponibili in stock, Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 18, Number of rollers: 2, PLC: Siemens

x-travel: 1250 mm y-travel: 600 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3300 mm y-travel: 2200 mm z-travel: 1300 mm w-axis: 350 mm workpiece height: 1700 mm milling spindle diameter: 140 mm diameter of quill: 230 mm milling head speed: 40-2000 U/min transmission ratio: 4 table surface area: 4260x2000 mm T-slot - distance: 175 mm T-slot - width: 28 mm number of T-slots: 11 workpiece weight: 300000 kg milling spindle motor: 30 kW Feed: 5-3000 mm/min control: Fidia total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Unit, Control Panel, Keyboard, Control Panel Teach Pendant -Manufacturer: Robosoft, Operator Panel for ATLANTIC ATS 3000 sheet metal shear -Type: SP 8 WL5 -Transport dimensions: 485/170/H170 mm -Weight: 3.1 kg

Display, display module, display panel -Manufacturer: Rittal Carel, Display Panel -Rittal: Type LKH -Carel: Type RITRC000T0001 -Dimensions: 440/190/H60 mm -Weight: 0.6 kg

floor-plate length: 3500 mm floor-plate width: 1600 mm floor-plate height: 180 mm T-slot - distance: 175 mm T-slot - width: 30/50 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety controller, safety relays, standard master device -Manufacturer: REER, Standard Master Device, 8 inputs, 2 OSSD pairs (SIL 3) -Type: MOSAIC M1 -Charge: -Number: 1x Relays available -Dimensions: 110/25/H115 mm -Weight: 0.2 kg

x-travel: 1200 mm y-travel: 700 mm z-travel: 750 mm Control: Heidenhain type: TNC 151 table surface area: 1200x630 mm spindle taper ISO: 50 turning speeds: 20-2900 U/min milling-head swivable +/-: total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1300x650 mm Working height: 350 mm 0: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . l 0: 5-400 °C total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mm y-travel: 3300 mm z-travel: 1300 mm Table load: 50000 kg column daylight: 2600 mm workpiece height max.: 1700 mm Table dimensions: 5000x2000 mm control: Heidenhain type: ITNC530 : angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: 1300 mm Control: Heindenhain type: TNC530i : table surface area: 5200x2000 mm Table load: 30000 kg pinole diameter: 230 mm number of T-slots: 11 T-slot - width: 28 mm T-slot - distance: 175 mm spindle taper ISO: 50 turning speeds: 40-2000 U/min spindle motor: 30 kW transmission ratio: 4 total power requirement: kW weight of the machine ca.: 70 t dimensions of the machine ca.: 10x5,5x5,8 m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 630 KN distance between columns: 800 mm stroke: 150 mm table surface area: 720x550 mm ram surface: 720x520 mm dayligth: 420 mm rapid drop speed: 394 mm/sec working feed: 71/17 mm/sec return speed: 390 mm/sec adjustment movement of the stroke: 120 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1000x1000 mm number of T-slots: 8 flute distance: 45 ° T-slots: 18M16 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters, load break switches, terminal blocks, load disconnectors, fuse load disconnectors -Manufacturer: Rittal, OM adapter -Type: SV 9340.460 -Quantity: 1x adapter available -Dimensions: 70/55/H210 mm -Weight: 0.3 kg

pressure: 63 t stroke: 6-60 mm no. of strokes: 90-550 Hub/min : 300 mm table surface area: 780x600 mm ram surface: 807x460 mm tool hole in ram: Ø 40 mm ram - range of adjustment: 80 mm total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2900x2000x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t stroke: 4-60 mm no. of strokes: 85-500 Hub/min ram - range of adjustment: 80 mm : 320 mm table surface area: 750x600 mm ram surface: 750x600 mm total power requirement: 31 kW weight of the machine ca.: 8,2 t dimensions of the machine ca.: BxTxH 2900x1900x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t stroke: 37 mm no. of strokes: 30-240 Hub/min ram adjustment: 150 mm table surface area: 1200x1000 mm hole in the table: 500x180 mm tool hole in ram: Ø52 mm total power requirement: 50 kW weight of the machine ca.: 35 t dimensions of the machine ca.: LxBxH 3700x2300x3900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.