man roland r used for sale

Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat -Manufacturer: Raychem, thermostat with temperature sensor -Type: TRDR -Temperature range: - 0-15 °C / 0-15 °C -Dimension: 160/105/H55 mm -Weight: 0.6 kg

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

RHOSS Chiller Air-cooled, 705KW, built in 2004, refrigerant R407c Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 1/200 -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/420/H1420 mm -Weight: approx. 72 kg

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...

Air/water heat exchanger for enclosure cooling SK 3210100, Rittal, used Top The cooler has 2 water connections for the cooling medium water. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good condition. It looks as if it has never been used. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warr ...

Display, display module, display panel -Manufacturer: Regloplas, display panel type RT45-Geh -Art. No.: 45750 -Dimensions: 130/100/H100 mm -Weight: 0.9 kg

as good as new 1400 x 420

Axial piston pump, hydraulic pump, oil pump, gear pump -Manufacturer: Rexroth -Pump: Type LA10VS0 45 DFLR/31R-PPA12N00 -Electric motor: Siemens -Type: 1 LA5163-4AA96-Z IEC160M -Drive: 11 kW -Speed: 1460 rpm -Dimensions: 950/500/H510 mm -Weight: 138kg

PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, processor -Manufacturer: mushroom, processor -Type: P10 CPU/RAM 304060 -Dimensions: 250/230/H40 mm -Weight: 1.3 kg

Reference Num.: 3478 Brand: Ryobi Type: 512 Construction year: 1996 Impressions: 55 mio Size: 520 x 365 mm Available: directly Status: In production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 365 mm Printing speed: max 11,000 sheets/hour Printing units: 2 Paper thickness: 18.11 mm Machine size: Length: 2,215 mm, Width: 1,561 mm, Height: 1,598 mm Total weight: kg 2,200 / lbs 4,850 Equipment: - Crestline Filmfeuchtwerk

Control cabinet, distribution cabinet, TS control cabinet, modular cabinet, server cabinet, system cabinet, modular system, modular cabinet system, single system cabinet -Manufacturer: Rittal, System single cabinet, unused -Type: X 2-door -Dimensions: 1200/520/H2000 mm -Weight: 166 kg with pallet

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 430/420/H1130 mm -Weight: 80 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/410/H1070 mm -Weight: 72 kg

Rachner Pile Turner F 1800 PA / R+S Completely overhauled, large opening width, 1800 mm Platform size 800 x 1270 mm with pile ventilation and vibrator. Technical condition almost as good as new after overhaul. ( 2024 ) Inspection and testing are possible at any time.

High-speed labeller for 2.25 ml Ypsomate Autoinjectors. The machine line consists of an automatic pallet management system for the autoinjectors packed on pallets in trays: a) Integrated Full Tray De-Palletizing with a first FANUC robot, which places the trays on a conveyor belt. On the same machine, the empty pallets are palletized with empty trays by a second FANUC robot. b) Machine where via the conveyor belt, trays transported with autoinjectors arrive at the next FANUC robot. This robot will pick up the autoinjectors in the laying position from the trays and put them upright into the feeder to machine c). The emptied trays will be transported back to machine a), where they will be picked up and put onto an empty pallet. c) Fully autom. rotary labelling machine IMA, type Sensitive Roto 720. Machine with two label dispensers for faster reel change (no downtime). Outp ...

Type: RCU200SY-01B Year of Make: 1999 Cooling Capacity: 404kW Refrigerant: R417C RefComp compressor with a capacity of 119kW Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

IMEAS grinding cabin RCI/160 - RCS.2T/160 consisting of a lower and an upper satin finishing machine with two rollers.

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg

- Output up to 12 to/h - With squeeze rollers - Hopper 820 x 820 mm - With base H: 900 mm - Dimensions: L 2200 x W 550 x H 1800 mm (incl. base) - Machine in good condition

Offer gebr. Pipe saw, pipe cutting and chamfering machine Fabr. GF Type RA6 Specifications: Tube Outer Diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz Stepless speed 150 -270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate used, in good condition

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, valve amplifier, valve control, prop. amplifier -Manufacturer: Rexroth, Prop. Amplifier -Type: VT 5004 -PCB: VT 3002 -Dimensions: 200/60/H140 mm -Weight: 0.4 kg

Pile turner Rachner F 1800 PA/RS; Condition obsolete; Platform size 800x1270mm; Opening width 1800mm; Vibration function; Blowing air with extra large blower 7.5KW; Side ruler; Load capacity 1000kg. Pile turner Rachner F 1800 PA/RS; condition rebuilt; size 800x1270mm; max.pile hight 1800mm; jogging; airing with big blower 7,5KW; adjustable aligning gauge; carrying power 1000kg.

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer -Type: RDRK 25KM -Power: 0.63 kVA -Primary: 3x380-400-420V -Secondary: 24V DC -Dimensions: 190/190/H170 mm -Weight: 1.1 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm -Weight: 18 kg

Gripping pliers, clamping pliers, roboter plier -Manufacturer: ASS, gripper type GRZ 20-16 ROS with sensor -Piston: Ø 16 mm -Shaft: Ø 20 mm -Closing force: approx. 65 N -Sensor: ASS ES8-PNP -Quantity: 8x grippers available -Price per piece -Dimension: 130/30/H45 mm -Weight: 0.1 kg/pc.

Crankcase for MWM RHS 518 A, 8 cylinders for sale. Housing is in very good, used condition, see detail photo. Previously used as an emergency power generator with few operating hours. Part Number: 26.01-82/04 26.01-82/34 E 26.100-142/04 26.100-142/34 E

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Foldable mechanical heating press with pressing surface approx. 150250mm. Stable press frame made of generously dimensioned aluminium plates and steel joints. Closure of the press plate and heating plate with ratchet. 2 pre-tensioning beams for locking hinges by means of eccentric clamps. With electric aluminum heating plate 400 watts, 1.74 A, heating area approx. 150 250 mm to 250°C, connection 230 V. With sensor and temperature control. Pressure-resistant insulating plate for use in presses. Suitable for pressing, welding transport belts and plastic straps.

Dosing container 10.5m³ capacity Steel grade S355 Overall channel low-stress annealed 10mm Hardox 450 wear protection in the gutter bottom 2 x Unbalance Motors Various hood options, possibly with extraction connections Electrically driven slide for dosing For material eg: copper and plastic according to photo, but with drive and painted Other options: 3-Sided Wrap Guard 400mm Hood according to drawing Control box for stand-alone operation, with FU without Hardox wear protection Channel without container, frame, etc., incl. drives Reserve drive

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Manufacturer: Robosoft, Control Unit from HACO press brake type PPES 30135 -Type: HACC 013 -Dimensions: 100/85/H80 mm -Weight: 0.2 kg

CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board, main relay board -Manufacturer: Robosoft, main relay board from press brake HACO type PPES 30135 -Type: PC15 PPESV2 -Board: 338-0149V3 -Dimensions: 400/200/H85 mm -Weight: 2.2 kg.

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool / press tool clamp press tool -Receptacle: Ø 40 mm -Profile: Radius 20 mm -Dimensions: 140/46/H120 mm -Weight: 2.2 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate -Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate -Type: 55021/22-6 Ø 220 mm -Bolt circle: Ø 134 mm -Hole: Short taper 6, cone Ø 103 - 106 mm -Dimensions total Ø 220 x 190 mm -Weight: 20.1 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 36 mm -Type: unknown -Hole: Ø 10 mm -20 teeth: belt width 16 mm -Quantity: 57x timing belt pulley available -Price: per piece, minimum order 2 pieces. -Dimensions: Ø 36 x 20 mm -Weight: 0.1kg

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

To generate pressure and vacuum For more details, see Operating instructions in the appendix Little used, like new

Pallet line, pallet production, Euro pallets Complete production line for Euro pallets From round timber to finished pallets Debarking Band saw Multi-rip saw Cutting saw Length sorting system Stacking system Conveyors Nail Machines (Böhm & Kruse) and so on.

Countersink, countersink, deburring countersink -Manufacturer: Roterberg, Countersink Senkmeister 3 -Countersink: 45° / Ø 35 mm -Recording: MK3 -Number: 3x countersinks available -Price: per piece -Dimensions: Ø 60 x 250 mm -Weight: 1.8 kg

Rotomec Coating Line Year of manufacture 1984 / improved 2021, max. web width = 1130 mm, Max. speed= 200m/min, Rewinder max diameter = 1000 mm turnstile Unwinder max diameter = 1000 mm turnstile 1 rotogravure unit. = Rotomec air sleeve system, 4 dryers up to 150 degrees. Coating thickness and moisture meter = NDC, Path detection = Dr.Scholz, 13 cylinders, 30 Pressure sleeve

Rotomec Coating Line Year of manufacture 1984 / improved 2021, max. web width = 1130 mm, Max. speed= 200m/min, Rewinder max diameter = 1000 mm turnstile Unwinder max diameter = 1000 mm turnstile 1 rotogravure unit. = Rotomec air sleeve system, 4 dryers up to 150 degrees. Coating thickness and moisture meter = NDC, Path detection = Dr.Scholz, 13 cylinders, 30 Pressure sleeve

- Type: RS 10 (Rotoscreen) - Year of construction: 2003 - Consisting of a fixed and a movable slat grille - Material: stainless steel

tool clamping area: Ø 30 mm Shipping weight: 50 kg Packing: ca. 600400200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gear type R62 i 6.72 -Speed: 208 rpm at 1400 rpm -Shaft: Ø 30 x 60 mm / Ø 19 x 40 mm -Number: 1x gearbox available -Price per piece -Dimensions: 370/190/H200mm -Weight: 22 kg/piece

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gearbox type R803-LP90 i 186,65 -Speed: 7.5 rpm at 1400 rpm -Shaft: Ø 50 x 100 mm / Ø 16 x 16 mm -Dimensions: 490/290/H310mm -Weight: 68 kg

length: 6000 mm width: 2500 mm height: 2650 mm weight of the machine ca.: 7,5 t 20” workshop container - seaworthy Various equipment - Roof hatch Weight approx. 7.5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.