128,848 used machines on RESALE, but how to find them? Machine Search
; Mileage [km]: 6; Power [PS]: 440
; Mileage [km]: 6; Power [PS]: 440; Accessories: Turbo; Amount of previous owners: 1
Pressure flange for STARTER MAN 40/54 recon MAN part number: 161.01.011
MAN 40/54 recon gas flange MAN part number: 289.07.002
Indexing tube without man 40/54 tap MAN Part Number: 419.01.004
Pressure pipe ground MAN 40/54 recon MAN part number: 434.01.012
MAN 9L32/40 complete engine 3 pieces available Each engine 4320 Kw at 720 Rpm Also able to sell crankshaft / spare parts or the cylinder block please contact: info@fin-marine
MAN NR34/S026 Turbocharger 1 new and 3 used available New bearings and repair sets also available in our stock in Istanbul Please contact: info@fin-marine
REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.
MANN Filter OIL, for engine 28/32 Part number: W1168/5
used
used
Dear's Sale, used 3 engine MAN 16/24 Layner, piston, conrod ,fuel pomp, air cooler, etc. Brgds Hakan KUSCU +905323642509
Double turbo pulping/refining machine by MANZINI Model: TEF20.E Year: 2000 Overall dimensions: length 2,900mm, width 1,700mm, height 2,400mm
MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine
Ingersoll Rand Man Rider Winch available for sale. Make: Ingersoll Rand Man Rider winch Model Number: FA51-MR24MK1G/06144 Serial Number: A015878 Year: 2010 Man Lift SWL: 6875 lb at 75 fpm at top layer Utility SWL: 11000 lb at 54 fpm at top layer Press: 90psig FLOW: 700 ROPE DIA: 3/4INCH Drum Size in: 15 Barrel Dia: 27 Flange Dia: 24Lgth
Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234
Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
Available in stock 1 x Used MAN NR34/S022 Turbocharger. Fully serviced at MAN and ready to be installed. The equipment is used but in good working conditions.
Key data: 18 , 8 , 3
Screw compressor Mannesmann DEMAG SE 30 S 3 m³/min, 8 bar, 18.5 kW Good condition Test run carried out Ready for action
High-quality lattice supports with high load capacities, inexpensive alternative for gratings – Brand new – Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (with a 2.70m trusss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1.05m 1,10 1.20m Other depths on request! Evenly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Lattice grid: 50 x 100 or 25x100mm Please also indicate which beam type (truss type) you have! So whether box profile (or IPE carrier) 50 or 40mm, or whether they have trusses with step. Advantages: no sharp edges 200% safety factor – independent of the shelf beams Bealstable for permissible deflection and structural failure Large selection of standard sizes and load capacities MantaMESH is our market-leading wire me ...
Diesel-Generator Power: 500 kVA Year: 1997 Operating hours: 49612 Generator: Stamford HC I534D1 Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Battery voltage: 24 V 20 ft container Weight: 8.5 tons Manual switchgear with motor monitoring Subject to prior sale - errors possible! Internal reference number: E-1004-49
Manesty D3B tablet press Serial: 24D117 Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Perfector 1/5 and 6/0, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Refrigerator, Auto-Wash, Double Size Impression Cylinders, Roland Mabeg Jet Feeder, Steel Plate on Overlap, High Pile Delivery, Autosize, IR Dryer and UV Dryer, Standard Accessories
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SUB: FOR SALE... MAN 8L 20 / 27. USED CRANKSHAFTS AT TURKEY HAVE A GDY SIR WE VE 2 PCS USED MAN 8L 20 / 27 CRANKSHAFTS AT OUR STOCK AT TURKEY.. CRANSHAFTS MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item Condition: New as pictured Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg More items - new and used - can be found in our shop! International shipping costs on request!
1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...
Key data: 630 mm
Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg
maximum number of results exceeded
please refine your search
