127,590 used machines on RESALE, but how to find them? Machine Search
1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posivel PVC-26, new 2011 (excellent condition). Column 2.350 mm tall. Designed for a maximum lifting load of 36 KG. Maximum radius 2.600 mm. Vertical stroke 1.400 mm. Fitted with 71 mm diameter expander-type gripper for tubes with 90-degree (vertical/horizontal) swivel motion. 2 units available. Visible rack is for transport purposes only and not included (available at additional cost).
Complete Chonglee High tenacity yarn ( Both PET and PA) spinning lines available for sale, manufactured by Chonglee in 2012, consist of 7 individual line, 4/8 ends winder, chuck length, 1200mm, 4/8 ends changable,10 / 8 hot godets, each pos. has 8 packs & spinnerets, 90mm,5.0 meter, can spin 400-1500d yarn, strength 9.2-9.5 gpd, Total 27 positions. from extruder to winder. Stopped 2 months, just complete refurbished last year, very good condition, can be soldl separately; A. line: with 6 pos, 150mm extruder, 10 godets B. line with 4 pos., 135mm extruder, 10 godets C. line: with 4 pos.135mm extruder, 10 godets D. line: with 1 pos.105mm extruder, 10 godets E. line: with 6 pos.150mm extruder, 8 godets F. line: with 3 pos.120mm extruder, 8 godets G. line: with 3 pos.120mm extruder, 8 godets Serious buyer contact us. serious buyer contact us.
Original wrestler holders (Bekum) - Completely overhauled - Quick change function - Immediately available Original blow pin holders (Bekum) - Completely refurbished - Quick change funcion - Immediately available
Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1
MAN cylinder liner, for engine 28/32 Part number: 1152579
Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...
10 pcs. Pressure mandrel set suitable for the following workshop presses: WK 10 TH WK 12 FH WK 20 FH WK 15 TH Pro WK 20 FH Pro WK 30 FH Pro WK 50 FH Pro PWK 10 T PWK 20 F PWK 45 F PWK 50 F PWK 75 F PWK 100 F Printing capacity Diameter (A) Diameter (B) Length (C) 2 ton 10 mm 25 mm 50 mm 3 tons 12 mm 25 mm 60 mm 8 tons 16 mm 25 mm 60 mm 12 tons 18 mm 25 mm 85 mm 14 tons 20 mm 25 mm 85 mm 16 tons 22 mm 25 mm 85 mm 18 tons 25 mm 25 mm 110 mm 20 tons 30 mm 25 mm 110 mm Weight, set total approx.: 7,5 kg
T-shirt bag making machine, brand: Coemter, model: TER-851N, year: 1981, working width: 850 mm. For two tracks. Coil can be mounted up to 1.10 m.
Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min
Seam closer Schechtel MS Manual Length 1 m
We have 16 new MAN 28/32 engine connecting rods in stock. Part Number: 1152579
1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2004. Column length 2.300 mm. Designed for a maximum lifting load of 80 KG. Maximum radius 3.000 mm. Vertical stroke 1.800 mm. Standard operating console currently fitted with 500 kg rotating safety-hook. Other types of hooks for various products can be fitted at additional cost. NOTE: visible mobile foot-plate in pictures is strictly for our demo purposes and not included.
used
5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204
Automatic hardcover counter strainer equipped with: • Automatic Cover Feeding • Automatic carton feeder from 1 to 5 pieces • With servo motors and 3 photoelectric sensors for the registration of the sheet on the side and diagonal cardboard • Automatic viscometer • Touch screen for convenient and quick adjustment of the machine It allows cardboard lining with window and cardboard lining with some irregular shapes (such as some non-straight side). Maximum format size of 900 x 460 mm
Hydraulic mandrel bending machine with a lot of accessories Preselection of 8 different bending angles with digital display Digital length display as well as digital display of torsion Max. effective length: 6096 mm Round tube steel (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg
Casing-in machine Make Schmedt Model Präleg HHS1801 Year 1998 Minimum size 80 x 110 x 2 mm Maximum Size 340 x 320 x 80 Speed up to 200 cycles per hour Available direct
ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves
Hand Feeding Covering Material, Hand Feeding Hard Spine Insert, Automatic Cardboard Feeding, Automatic Soft Spine Insert Feeding From Roll, Hot Glue, Format: Max. 530x400mm, Min. 110x155mm, Speed: Max. 15 Cycles/Min.
Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories
Kolbus CASERMAKER DA 232 Year: 2004 Serial Nr.: 236 Transport feed Hopper feed of pre-cut boards Hot melt glue Copilot system with touchscreen Auto splice and waste cutter Automatic lubrication Max size 405 x cover 560, 110 x 155 mm • Max cover thickness 4 mm
- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel
Exhaust manifold MWM 518A with temperature monitoring for sale Other spare parts for the engine also available: -Starter -Turbocharger -Engine timing -Water pump
Water pump, new suitable for MAN D2842, cf. original MAN number: 51.06500.6470
Exhaust Manifold for Volvo Penta D12 Volvo Part Number: 849134
Inv. Num. : 7711 Type: VM Multi 400-1 Producer: Schmalz Created: 2021 Parameters: Load capacity: 275 kg Weight: 75 kg
Differential Pressure Gauge ATEQ F620 with Stäubli coupling Electronic pressure regulator from 1 to 10 bar +-500Pa with test leak Original price 9770€ Almost mint condition Production line has been phased out
RAIMANN KR 310 M ProfiRip Board measurement with automatic saw blade adjustment Optimization for the best possible width distribution Quality division of the boards Workpiece data max. cutting width 310 mm Total passage width 800 mm max. cutting height with blade adjustment without pressure screen 115 mm max. cutting height with multi-blade adjustment without pressure screen 130 mm with pressure screen 115 mm min. cutting height 10 mm min. workpiece length 740 mm Pull-out roller / top pressure roller Locking pressure screen Pneumatic pressure rollers Machine data 2-fold saw blade adjustment 4 x Laser Directional Light Cutting Indicator Control model Proficut with Siemens PC Simatic touch panel Control panel mobile Transport chain with spikes – width 340 mm Automatic chain lubrication with oil level monitoring Diameter saw shaft 65 mm Diameter of socket 80 ...
manueller Deckenherstellung - manual Casemaker Schmedt PräDeck Year 05-1986 - Serial-Nr. 246 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Nutmaschine manuell / Creasing Machine - manuell Emil Kahle N80 Serial-No. 22003 Arbeitsbreite / Working width max. 800mm Manuell Fußpedal / Manuell foot operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
manuelle Rillmaschine - Perforiermaschine / manuel Creasing - Perforation machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680
weight max.: 12 t work piece width: 880 mm total power requirement: 130 kW weight of the machine ca.: 63,3 t incline position of plears upwards 6,5° incline position of plears downwards 12,5° strike-slip fault left 200mm strike-slip fault right 200mm rotary speed of plear 2-30U/min driving speed 2 levels 0-60m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lever hoist, ratchet hoist KAISER +KRAFT Type: 1117 Load capacity: 3000 kg Chain length: 1500 mm used, tested ! Dimensions: 800 x 250 x 230 mm
Lever hoist, ratchet hoist PAGUS load capacity: 6300 kg stroke: 3000 mm with roller chain used, tested ! weight: 59 kg Dimensions: 1000 x 800 x 230 mm
Distributor block, distributor block with PE converter LANDEFELD COMPRESSED AIR T CL12 PE MULTIFIX G 1/2 Series 2 New ! Dimensions: 185 x 100 x 80 mm
Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm
Hand Control Valve, Hand Control Valve WMW St H2 ND: 1.0 MPa NW: 6 mm used ! Dimensions: 140 x 110 x 130 mm
welding manipulator, welding turntable, welding table HEINRICHSGLÜCK H50 payload: 5000 kg clamping plate: 1200 x 1200 mm 360° rotatable ca 110° tiltable 380 V used, tested ! Dimensions: 1500 x 2800 x 1700 mm
Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm
Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm
Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm
maximum number of results exceeded
please refine your search
