man engine used for sale

Manufacturer: IMA , Type: Fügefräsen, Motor with gear: 2 Motoren steuerbar und verstellbar, Spindle length mm: ca.60, Motor with gear: 2 Motoren steuerbar und verstellbar, Speed rpm: ca.2,2 kw/5860 , Overhauled on: inkl. Haube,

Manufacturer: SEW-Motor mit Antriebsriemen, Type: K 37 DT 80, Motor with gear: yes, Maschinennummer: 50.01013736.01.0001.02.03, Power kW: 0,75, Motor with gear: yes, Speed rpm: 2700/303.0,

Manufacturer: Siemens, Type: Synchron-Servomotor 1FK6, Year: 2000, Motor with gear: no, Maschinennummer: MO99 5712 01 003, From machine: IMA BIMA 410, Volt: 270, Ampere 1: 4,5, IP: 64, Motor torque Nm: 6.0/4.0, pm: 3000/3900, Series: 1FK6060-6AF71-1TB0, Motor with gear: no, with motor brake: Ja, FREE TEXT: Brake 24 V/ 15,6 W , 6-poliger Motor, 100K, 3000 1/min selbstgekühlt, IM B5 (V1, V3) Leistungs-/Signalstecker Stecker 270 Grad drehbar, Year :2000

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,

Manufacturer: Homag Synchron Aggregateverstellspindel, Gear: 1512-2-8213 AB04J22.04, Gear: 1512-2-8213 AB04J22.04,

Manufacturer: Weeke Z-Achsmotor, Type: Mdd071B-N-060-N2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, n-min: 6000, Weight approx. kg: 9,

Manufacturer: Indramat Weeke Permanent Achsmotor, Type: MDD071B-N-060-N2S-095PL1, Year: MDD071-17391, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Bore mm: 6,6 Nm, Year :MDD071-17391

Manufacturer: Weeke CNC C-Achsmotot Indramat Permanent Magnet Motor , Type: MDD071B-N-040-N2S-095GAO, Motor with gear: yes, Gear: yes, From machine: Weeke, Motor with gear: yes, Gear: yes,

Manufacturer: Indramat Motor Y-Achs Antrieb Weeke/Homag , Type: MDD071B-N-040-N2S-095GA0/7P010-MF1-10-040-000, Maschinennummer: MDD071-17390, Motor torque Nm: 4.40/6.60, IdN A: 11.00/16.60, pm: 4000/6000,

Manufacturer: Indramat Permanent Magnet Motor, Type: MDD071B-N-060N2S-095PL1, Year: MDD071-17392, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Year :MDD071-17392

Manufacturer: Perske Fräsmotor mit Nutenstein Mitnehmer, Type: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, pm: 2870/5870,

Manufacturer: Perske Fräsmotore verstärkte Ausführung, Year: VS.42.20-2, Motor mit Getriebe: 794929, Sek:: IMA, Btr:: 794929, Series: yes, Motor mit Getriebe: yes, Installation height: 133 Volt, Length mm: 200 Hz, Anschlussspindel mm: U/min 11530, Year :VS.42.20-2

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: Lenze, Year: ca.1995, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, aus Maschine: Homag, IdN A: 5,5/8,9, Kw output: 7,5, Volt/Hz: 50, pm: 1450, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, Flange motor design: yes, FREE TEXT: mit Disco Verstellgetriebe 11.712.08.20, Year :ca.1995

Manufacturer: Inadramat , Year: 1999, Type: MDD 112B-N-040-N2L-130GAO, Motor mit Getriebe: Motor mit Tacho und Zahnrad, aus Maschine: Weeke BP 195 T, MdN Nm: 17,9-29,9, IdN A: 68, n-min: 4000, Motor mit Getriebe: Motor mit Tacho und Zahnrad, Price per unit Euro: 2000, Wight approx. kg: 36, FREE TEXT: Neupreis ca. 4400, Year :1999

Key data: 110 KW, 1500 1/min

Removed in very good condition rotating

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

System designation D8-IPS700 Configuration in-line 6 Crankshaft power, kW (hp) 405 (550) 2900 rpm Propshaft power, kW (hp) 384 (523) 2900 rpm Aspiration Twin entry turbo and compressor

System designation D8-IPS800 Configuration in-line 6 Crankshaft power, kW (hp) 441 (600) 3000 rpm Propshaft power, kW (hp) 419 (570) 3000 rpm

Product designation D6-IPS650 Crankshaft power Kw/Hp 353 /480 Propshaft power, kW /Hp 339 /461 Engine speed, rpm 3700

turning diameter over bed: 420 mm turning diameter over slide rest: 290 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 210 mm spindle bore: 38 mm total power requirement: 4,0 KW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm centre height: 170 mm centre distance: 650 mm turning dia. over face-slide: 196 mm spindle bore: 42 mm inner taper MT: 5 spindle turning speed - stepless: 20-3250 U/min weight of the machine ca.: 1,6 t dimensions of the machine ca.: 200 x 125 x 165 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

Paxman - 12RPHCZ MK 7 Turbocharger Holset Model 6 Completely overhauled Unit price! 2 pieces available !

power capacity: 63 / 93 kW volt: 380 V ampere: 122 / 178 A weight of the machine ca.: 0,5 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MTU V12 Engine Camshafts

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

Commonrail pump As good as new with 400 hours

14.500 litre, Stock number: T3371, Litre: 14.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm., Agitator: Yes , Agitator type: 3 pcs. 3-bladed propeller, Agitator placement: From the top with bottom guide, CIP: Yes, 2 pcs., Working pressure double jacket: 4 bar, Inner diameter: Ø 2850 mm., Outer diameter: D 3000 mm., Total height: H 4400 mm., Manufacturer: VSR Engineering, Year: 2003

Key data: 1185 KW, 1000 1/min

BECAUSE OF NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 SHIP ENGINE REMOVED IN ROTATING CONDITION

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jenbacher 320 Year of manufactory 1999 Running hours total 40265 Running hours after major ouverhaul 265 Condition excellent Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel Diana blue panel All communication kabels Batteries Pumps and pipes Full set of documentation Loading on truck include in price Price 43000 euro Extra Exhaurst heat exchanger Ventilation fans Oiltanks and pumps Transformer Switch gear VLT Radiator for intercooler Loading on truck include in price Price 7000 euro Dismantled and ready for loading

Jenbacher 316 Year of manufactory 1996 Running hours total 99800 Running hours after major ouverhaul 20000 Condition good Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel EMS 2000 panel All communication kabels Batteries Pumps and pipes Full set of documentation Loading on truck include in price Price 18000 euro Dismantled and ready for loading

Jenbacher 316 Year of manufactory 1997 Running hours total 38867 Running hours after major ouverhaul 38867 Condition good Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel Diane blue panel All communication kabels Batteries Pumps and pipes Exhaurst heat exchanger Full set of documentation Loading on truck include in price Price 26000 euro Dismantled and ready for loading

Key data: 1276 KW, 900 1/min

FOR SALE... COMPLETE 1 ENGINE SULZER 8 S 20 AT TURKEY TO WHOM IT MAY CONCERN; WE'VE 1 PC COMPLETE 1 PC ENGINE SULZER 8 S 20 EX GENSET ENGINE AT OUR STOCK PLS FIND ENGINE DTLS AT BELOW TYPE 8 S 20 REV 900RPM ENGINE SHAFT OUTPUT 1276kW YOB 1997 ENGINE HAS STD CRANK SHAFT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST REGARD; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

Key data: 681 KW, 1500 1/min

Jenbacher 316 Including: - Jenbacher Control (Diana Blue) - Gas line - On-site delivery and/or installation possible at an additional cost.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Selling an inventory of a mechanical engineering company. various lathes, milling machines, rolling machines, saws, etc. Pictures on request. The machines are only sold as a package! Not individually

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...

Lead and pull spindle lathe WEIPERT Year of Make: 1956 Spindle bore: 90 mm Center width: 3000 mm Circulation Ø over bed : 800 mm Circulation 0 over slide: 610 mm Circulation 0 in offset: 1120 mm Speed range: 7.5 – 475 rpm With the following accessories: Multifix tool holder with 11 inserts Coolant Setup Three-jaw chuck 0315 mm Three-jaw chuck 0 400 mm Three-jaw chuck 0 500 mm Face Plate 0 400 mm Face Plate 0 800 mm Face Plate 0 1000 mm Running Lynette Various turning tools (30 pcs. indexable insert tools) 2 moving centering tips 1 drill chuck Operating instructions

Key data: 1064 KW, 1500 1/min

Two units JENBACHER JGS 320GS NL available One engine dismantled and can be used for spare parts Capacity 1064 kw 1500 rpm With stamford alternator