129,003 used machines on RESALE, but how to find them? Machine Search
No additional documents available - Seller takes care of paper loss of registration certificate! Auction-ID: A3-43368-13035
Depth of work basket 35CM Auction-ID: A3-43368-13572
For sale is a high-quality motor yacht Mano Marine 35 HT, built in 2011, built in Italy. The yacht convinces with a successful combination of sporty elegance, high quality of workmanship and extensive equipment. In 2025, the yacht was completely re-foiled (hull and hardtop) and presents itself accordingly in a very modern and well-kept appearance. With an overall length of 11.70 meters and a width of 3.94 meters, she offers generous space for comfortable cruising and longer stays on board. The slender GRP hull in Deep V construction ensures very good seakeeping characteristics and a smooth ride even in more demanding conditions. The yacht is powered by two Yanmar inboard diesel engines, each with 300 hp, which enable a cruising speed of approx. 32 knots and a maximum speed of up to 38 knots. The operating hours are about 600 hours. The interior offers two comfortable cabins, two full ...
table size: 1400 x 1400 mm; Auction-ID: A1-45793-28
Equipped with tension tape, + tensioner, mobile setup Auction-ID: A1-45866-24
Vehicle valuation from 17/04/2026 is available, and can be requested on request at: margit.meyer@surplex.com ; Notes: There is only one of this extremely unique MANSORY GRONOS G63 in the world. This car originally had a new price of about 700,000 €! Options: Exterior included: Interior included: High performance: • Front bumper with air intakes • Grill mask, CFRP exposed • Black headlights in LED design • Bonnet, CFC • Covers for air outlets, CFRP exposed • Front fender flares • Mirror cover, CFRP exposed • A-pillar covers, CFRP exposed • Front roof cover, CFRP exposed • Body panels, CFRP exposed • Side walls with LEDs, CFRP exposed • Rear fender flares • M10 forged rims 21\"-23\", silver front polished or black front polished • Roof cover with LEDs, CFRP exposed • Roof spoiler, CFRP exposed • C-pillar covers, CFC exposed • Rea ...
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
Basket size LxWxH:900 x 1.500 x 500 mm Max. basket weight:- kg No. of washing chambers:1 filling amount:min. 270, max. 400 l Machine weight:2.000 kg dimensions of machine:2.650 x 1.945 x 1.870 mm
We can offer Barmag FDY lines, winder model: ACW-5T, 1380mm/12 ends, hot godets model HF6, All ground floor equipments, just dismantled into warehouse.very good condition.Serious cintact us.
We can offer 2 complete BCF spimming lines, eachline has 6 positions, manufactured by Plantex, Italy in 1996, can produce PP, PA yarn, 1~3 color, 1000~4000d, working condition. Seriou buyers contact us.
1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posivel PVC-26, new 2011 (excellent condition). Column 2.350 mm tall. Designed for a maximum lifting load of 36 KG. Maximum radius 2.600 mm. Vertical stroke 1.400 mm. Fitted with 71 mm diameter expander-type gripper for tubes with 90-degree (vertical/horizontal) swivel motion. 2 units available. Visible rack is for transport purposes only and not included (available at additional cost).
Complete Chonglee High tenacity yarn ( Both PET and PA) spinning lines available for sale, manufactured by Chonglee in 2012, consist of 7 individual line, 4/8 ends winder, chuck length, 1200mm, 4/8 ends changable,10 / 8 hot godets, each pos. has 8 packs & spinnerets, 90mm,5.0 meter, can spin 400-1500d yarn, strength 9.2-9.5 gpd, Total 27 positions. from extruder to winder. Stopped 2 months, just complete refurbished last year, very good condition, can be soldl separately; A. line: with 6 pos, 150mm extruder, 10 godets B. line with 4 pos., 135mm extruder, 10 godets C. line: with 4 pos.135mm extruder, 10 godets D. line: with 1 pos.105mm extruder, 10 godets E. line: with 6 pos.150mm extruder, 8 godets F. line: with 3 pos.120mm extruder, 8 godets G. line: with 3 pos.120mm extruder, 8 godets Serious buyer contact us. serious buyer contact us.
Original wrestler holders (Bekum) - Completely overhauled - Quick change function - Immediately available Original blow pin holders (Bekum) - Completely refurbished - Quick change funcion - Immediately available
Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1
MAN cylinder liner, for engine 28/32 Part number: 1152579
Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...
10 pcs. Pressure mandrel set suitable for the following workshop presses: WK 10 TH WK 12 FH WK 20 FH WK 15 TH Pro WK 20 FH Pro WK 30 FH Pro WK 50 FH Pro PWK 10 T PWK 20 F PWK 45 F PWK 50 F PWK 75 F PWK 100 F Printing capacity Diameter (A) Diameter (B) Length (C) 2 ton 10 mm 25 mm 50 mm 3 tons 12 mm 25 mm 60 mm 8 tons 16 mm 25 mm 60 mm 12 tons 18 mm 25 mm 85 mm 14 tons 20 mm 25 mm 85 mm 16 tons 22 mm 25 mm 85 mm 18 tons 25 mm 25 mm 110 mm 20 tons 30 mm 25 mm 110 mm Weight, set total approx.: 7,5 kg
T-shirt bag making machine, brand: Coemter, model: TER-851N, year: 1981, working width: 850 mm. For two tracks. Coil can be mounted up to 1.10 m.
Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Seam closer Schechtel MS Manual Length 1 m
mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min
1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2004. Column length 2.300 mm. Designed for a maximum lifting load of 80 KG. Maximum radius 3.000 mm. Vertical stroke 1.800 mm. Standard operating console currently fitted with 500 kg rotating safety-hook. Other types of hooks for various products can be fitted at additional cost. NOTE: visible mobile foot-plate in pictures is strictly for our demo purposes and not included.
used
5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204
maximum number of results exceeded
please refine your search
100 € 
