man engine used for sale

Majestic Manhattan Christmas tree 4.2 meters high, covered with hundreds of cool white LED diodes. Golden structure and shiny cladding ideal for galleries and shopping centers. Stable and fast installation. Impeccable condition, new value 9000 €. Auction-ID: A1-51201-113

Superb 2.3 m Manhattan illuminated tree, adorned with pearls, sequins and rhinestones. Chic and bright design for shop windows or lobbies. Cool white LED lighting providing a bright jewel effect. Prestige model in very good condition. Auction-ID: A1-51201-112

MAN 18.284 tipper truck, year 1999. VIN: WMAM38ZZZYY051147. Registration no.: JLA-617. Odometer reading recorded during inspection: approx. 561,435 km. Fitted with HIAB 102-S-2 loader crane, year 1999, serial no. 2048. Permissible gross weight: 18,000 kg. Manual transmission (8+2). Used condition with age- and use-related wear; damaged seat upholstery, large hole/damage in left door trim, cracked bumper, scratches and corrosion visible. Offered in its current condition as shown in the photographs. Functionality, roadworthiness, mileage and completeness have not been independently verified. Auction-ID: A1-51215-1

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Mantis Elite VISION Engineering Stereoscopic Microscope LOD'AIR Auction-ID: A1-51527-154

We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here

We can offer you all types of screw making machinery for M3 - M25

Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm

We offer all types of Wafios wire pin presses from S25 - N90

Contact manometer NG100 0-4 bar

1 of un-used! column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 1998. Standard column 2.300 mm tall. Designed for a maximum lifting load of 30 kgs. Maximum radius 3.000 mm. Vertical stroke 1.500 mm. With special gripper designed to lift, lower and tilt products approx. 45 degrees. Assumed application was handling storage bins 470 x 350 mm (pictures show example only, not necessarily the exact product handled). Could of course be used for various products. Width and depth of gripper can be adjusted. CE-marked but no operating manual available. Pneumatic diagram and spare parts list in German available. Two identical balancers available. Visible mobile foot-plate NOT included (used for our own internal transport and demo purposes).

- Intake Elbow mixture line MWM 12300231 - Please note! Price per piece! - 12300231 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and pr ...

ID3182 2 piece Strödter Vigomat VP 250-2,5 year/Year of construction 2013 articulated manipulators, pneumatic power supply Load capacity 240 kg Max. Max. load torque on load handling attachment 1200 Nm Max. Horizontal working range: Radius R 3.7 m Max. Stroke: 1.45 m Max. Max. lifting speed: 0.8 m/s Type of attachment Pedestal Weight of device 755 kg Noise emission < 70dB Pneumatic working pressure 6 bar Max. Air consumption: max 40 NI /double stroke Diameter of main cylinder 200 mm Buckling manipulators, power supply pneumatic Load capacity 240 kg Max. load torque at the noise pick-up device 1200Nm Max. horizontal working range: Radius R 3.7 m Max. stroke: 1.45 m Max. lifting speed: 0.8 m/s Fastening type of pedestal Weight of the device 755 kg Noise level < 70dB Pneumatic working pressure 6 bar Max. air consumption: max 40 NI /double stroke Diameter master ...

- Exhaust gas bend exhaust manifold MWM 12304038 o. 12300448 - Suitable for several motors - Please note! Price per piece! - 12304038 o. 12300448 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. ...

- Exhaust manifold exhaust manifold MWM 12300010 - Suitable for several motors - Please note! Price per piece! - References -> 12300011 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By consta ...

- Manifold MWM 12302114 - Suitable for several motors - Please note! Price per piece! - References -> 12302115 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

Used exhaust manifold by the Jenbacher 312 Both manifolds have gone to the end

Type WLG Made in Germany 1981 y.

Te Koop: Manifold Tuchenhagen Mixproof valve. 1.5 duims en 3 aaansluitingen.

Te Koop: Tuchenhagen manifold, Mixproof valve. 2 duims en 2 aansluitingen.

Te Koop: Hovap manifold air operated model 70. Type: 9460, duims 2 1 aansluiting. Processvalve

Te Koop: Manifold Hovap Processvalve. Type: 8721, 3 duims en 4 aansluitingen

Te Koop: Manifold Hovap. Air operated Varioflow. Type: 8722, 3 duims en 4 aansluitingen

Te Koop: Hovap manifold. Air operated Varioflow. Processvalve. Type 8123, 3 4 duims en aansluitingen.

Te Koop: Alfa Laval manifold. Type: DN 100 met 3 aansluitingen

Hand lever press to push pins in printed circuit boards

Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.

Manual written press for stamping of letters and numbers

Ricy press with foot release

Foot pendulum press

Welding manipulators

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 233.50.063 16 bar -Art.-No.: 12064394 -Screw connection: G1/4B -Dimension box: 90/100/H70 mm -Weight: 0.3 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 212.20.100 1.6 bar -Screw connection: G1/2 B below -Dimension box: 140/110/H60 mm -Weight: 0.6 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Riegler, pressure gauge 0 to 4 bar -Price: per piece -Number: 2 piece -Minimum purchase: complete -Dimension: Ø 62 x 47 mm -Weight: 0.1 kg/piece

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2014! (excellent condition). Standard column 2.000 mm tall with 470 mm extension. Designed for a maximum lifting load of 30 KG. Maximum radius 3.000 mm. Vertical stroke 1.800 mm. With console and special gripper for bags. Can be retro-fitted with a standard console for safety- or jerry-can hook at additional cost. Visible frame is for transport purposes only and not included (available at additional cost).

Contact manometer NG100 232.50 0-1bar

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Riegler, manometer -Type: 110.43-K 0 to 2.5 bar -Screw connection: G1/8 B -Price: per piece -Number: 9 piece -Dimension box: 50/45/H40 mm -Weight: 0.1 kg/piece

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Pressure gauge: 0 to 160 bar -Dimensions: Ø 62 x 47 mm -Weight: 0.1 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Display: 0-16 bar -Standard: EN 837-1 -Number: 3x manometers available -Price: per piece -Dimension box: 200/200/H60 mm -Weight: 2.1 kg

Contact gauge WIKA NG 100 0-1,6 bar G1/2''

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -screw connection -Display: 0-10 bar -Number: 2x pressure gauges available Price: per piece -Weight: 2.8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -screw connection -Display: 0-25 bar -Weight: 2.8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -screw connection -Display: 0-10 bar -Weight: 3.6 kg

Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm -Weight: 1.4 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Manufacturer: Suku, pipe manometer, unused, original packaging -Type: 0 to 10 bar -Screw connection: see photos -Cardboard dimensions: 150/110/H60 mm -Weight: 0.6 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 160 bar -Screw connection: see photos -Dimension: 105/45/H145 mm -Weight: 0.8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, manometer -Type: 0 to 10 bar -Screw connection: see photos -Dimension: 100/85/H100 mm -Weight: 0.5 kg

1 gebrauchter pneumatischer, überkopf montierter Handhabungsmanipulator (Balancer), Hersteller Dalmec, Typ Partner, Baujahr 1993. Schwank-Greifer mit Sauger und Venturi Vakumerzeuger mit max. Tragkraft 120 KG. Max. Arbeitsradius 2.200 mm, vertikaler Hub von 150 bis 1.500 mm. Zuletzt im Einsatz zum Manipulieren von Türen.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 250 bar -Screw connection: see photos -Number: 2x manometer available -Price per piece -Dimension: 100/85/H100 mm -Weight: 0.9 kg/pcs

1 of used pneumatic, overhead mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Partner PRF, new 1993. Tilting gripper-head with suction cups and venturi vacuum generator for max. load 120 KG. Maximum radius 2.200 mm. Vertical stroke 150 to 1.500 mm. 2 Rows of each 9 suctioncups, width adjustable between 455 and 945 mm. Last used for handling doors.