man bw used for sale

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...

Stock number: DT083, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: 260 - 520 pcs/min, Stations: 16 pcs., Variable speed: Yes, Tablet size: Max 25 mm, Dimensions: L 950 x W 950 x H 1850 mm, Documentation: Yes

pressure: 1000 kg throat: 95.0 mm table length: 120 mm table width: 120 mm total power requirement: manuell kW weight of the machine ca.: 17.0 kg dimensions of the machine ca.: 270 x 130 x 330 mm Description: - For pressing in and out bearings, bushings, etc. - Made of torsion-resistant steel - Includes mounting holes, ideal for mounting on a workbench - Suitable for bushing removal, straightening, bending, reaming, etc. - Adjustable lever bar, depending on the required force - Ideal for repair shops and general workshop use The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roby junior semi automatic casemaker suited for 3 piece cases format 50x70 cm light table for spine hot animal glue 2 sides turning in unit

A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible.

A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.

NEW, 200 cm width, 493 kg weight, 1.75 m³ capacity, suitable for Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, FEM3A, 4.5 t load capacity, with 120 cm long tines, with Manitou attachment, 246 kg dead weight

NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

NEW, Width: 240 cm, Capacity: 0.82 m³, Weight: 284 kg, with Manitou mount

Recon Part Number: 550 140 26 09 B1 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 31 09 B2 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 30 09 B3 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 34 01 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 27 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 32 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 29 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 33 01 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 551 142 16 01 On the turbo Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 0407 0013 Water-cooled Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 0407 0073 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 52 54 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 50 54 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Fully automatic tube bending and welding system with solid-state laser Trumpf TruDisk 3002 (6C), for the production of round, oval, polygonal, longitudinally welded tubes. Diameter from 80-400mm, length from 80-620, material thickness 0.8-2.0mm (steel, chrome steel and stainless steel). Other features of the fully automated pipe production machine are: -Bending station (weld edge bending) -Camera-guided welding optics. -Seam smoothing to eliminate any height offsets in the weld -annealing" at approx. 500 °C to optimize subsequent expansion or calibration -Extraction system for welding fumes. -Complete maintenance by manufacturers. Further machine data can be found in the pictures or under the homepage of weil-technology (solutions/machines/ecostar) The machine can be viewed under power at our Schönauer Straße location in 78737 Fluorn-Winzeln. Dismantling, loading and tr ...

Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D

The CTR-DB400 sets new standards in precision, efficiency, and ease of use. This compact double edger was specifically developed for businesses that demand the highest cutting quality while minimizing operating costs. With its powerful drive, robust construction, and precise adjustment of the saw units, the CTR-DB400 delivers consistently clean, parallel cuts – ideal for the cost-effective processing of planks, squared timber, and boards. Thanks to its intuitive operation and low-maintenance components, the CTR-DB400 is the perfect solution for small and medium-sized production lines looking to reliably increase their output. Designed, built, and quality-tested in Europe! Made in EU Advantages and Features: - Fixed saw blade, adjustable in 50mm increments for maximum space utilization - Dust extraction directly at the saw blade for optimal dust removal - Carpet with 2 pressure rollers  ...

The new Pilous DB700Pro double edger is aimed at professional users who demand maximum efficiency and capacity. This model offers more powerful units, optimized stability, and expanded adjustment options to process even the most demanding materials with maximum accuracy. With its powerful drives, high cutting performance, and durable components, the CTR-DB700PRO is the perfect solution for businesses that value speed, precision, and cost-effectiveness. ... Advantages and Features: - Reinforced drive technology for maximum performance - Extremely stable machine base - Fast, precise adjustments for professional applications - Significantly increased wood throughput capacity - Very high cutting height of 105 mm - High level of safety thanks to 4 rows of anti-kickback technology and multiple emergency stop switches - Perfect material feed thanks to 4 driven steel feed rollers at the bottom a ...

Vessel manipulator ELEV 300KG, max vessel weight 300 kg

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Color: Black Single length 2 m Original packaging Price per single length (2 m) = 18.00 € Minimum purchase quantity = 8 m

1 of used column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2015! (excellent condition). Standard column 2.000 mm tall with 500 mm extension. Designed for a maximum lifting load of 125/155 lbs (56.7/70.31 kg). Maximum radius 3.000 mm. Vertical stroke 1.800 mm. With operating console for reel-gripper (vacuum, with booster) or safety hook (originally used for lifting rolls of labels). Operating manual (English) with pneumatic diagram and parts list available (as pdf). Two devices available. Visible frame is for transport purposes only and not included.

Color: Yellow Single length 2 m Price per single length (2 m) = 18.00 € + VAT Minimum acceptance length = 8 m

Color: Yellow Single length 1.80 m Original packaging Price per single length (1.80 m) = €2.00 + VAT only complete acceptance Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Single length 2 m Original packaging Price per m = 2.00 € Minimum purchase quantity = 8 m Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Single length 2 m Used Minimum purchase quantity = 8 m Price per m = 2.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Afriso, capsule pressure gauge, unused OVP -Type: KP100 0/100 mbar -Art.-No.: 35119301 -Screw connection: G1/2B rad. -Number: 3x manometers available -Price: per piece -Dimension box: 140/110/H55 mm -Weight: 0.5 kg/piece

M2 cusing multilaser, 2 lasers à 400 watts CL1 Machining area: 250 x 250 x 350 mm (x, y, z) incl. incl. extension of the dosing chamber axis CL2 machining area: 250 x 250 x 250 mm (x, y, z) CL1 Operating hours : 6.176 h CL 2 Operating hours : 4,131 h Wet Separator NA7-11 CL Screening station incl. pallet trucks Blow-out station Powder container (8 pcs) Various accessories and spare parts (installation panels, seals, filters, rubber lips,) Machines can also be sold individually.

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Afriso, capsule pressure gauge, unused OVP -Type: KP100 0/600 mbar -Art.-No.: 35123301 -Screw connection: G1/2 B rad. -Number: 2x pressure gauges available -Price: per piece -Dimension box: 140/110/H55 mm -Weight: 0.4 kg/piece

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: Wika, capsule pressure gauge, unused OVP -Type: 612.20.100 0 mbar...250 mbar -Art. No.: 9071687 -Screw connection: G1/2 B bottom -Number: 2x pressure gauges available -Price: per piece -Carton dimensions: 140/110/H55 mm -Weight: 0.6 kg/piece

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: Wika, capsule pressure gauge unused OVP Type: 612.20.100 0 mbar...60 mbar -Art. No.: 9071652 -Screw connection: G1/2 -Number: 2x pressure gauges available -Price: per piece -Dimensions box: 140/110/H55 mm -Weight: 0.6 kg/piece

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Spare part comes from a BJM machining center type ALBZ-145 -Control unit: R 480 091 385 1 piece -Solenoid valve: Ø 820 055 051 4 pieces -Solenoid valve: Ø 820 055 101 1 piece -Moisture separator -Price/Sale: complete -Dimensions: 275/155/H230 mm -Weight: 4.7 kg

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, CPV14 valve manifold -Type: CPV14-GE-DI01-8 CPV14-VI -Valves: Festo 161 362 S802 and 161 360 S602 -Individual components: see photos -Dimensions: 180/180/H100 mm -Weight: 2.7 kg

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grabber, column jib crane -Manufacturer: Thyssen, pneumatic manipulator type ESP -Load capacity: 30 kg -Operating pressure: 6 bar -Reach: max. 2900 mm -Hook height: min. 500 mm / max. 1500 mm -Swivel range: 360° -Minimum ceiling height: 4400 mm -Transport dimensions: 3410/800/H2000 mm -Empty weight: 610 kg

Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, capsule spring pressure gauge, unused original packaging -Type: 0 to 4 bar -Screw connection: see photos -Number: 9x manometer available -Price per piece -Dimension: 110/85/H110 mm -Weight: 0.8 kg/pcs

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: GSL, pressure gauge with glycerine filling. -Type: 0 to 250 bar -Screw connection: see photos -Number: 103x pressure gauges available -Price: per piece / from 2 pieces 12,- €/piece / from 10 pieces 10,- €/piece -Dimensions box: 90/70/H40 mm -Weight: 0.2 kg/piece