133,970 used machines on RESALE, but how to find them? Machine Search
Feeder Buhrs HF 4; good condition; cleaned and tested, new belts; Format max.310x310x80mm, min.80x50mm; Speed 150m/min; Incl. Compressor. Feeder Buhrs HF 4; good condition; cleaned and checked; new belts; size max.310x310x80mm, min.80x50mm; speed up to 150m/min.; incl.compressor.
Model: VS8-A Price: 750.00 euros without VAT Category: Recycled machines
Stainless steel Crank drive Movable mixer Dispenser for preparations Suitable for wall hanging Dimensions 40 × 34 × 59.5 cm
Technical data for the pallet rack stand: Shelving system: Bito Type: PL 38 Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abbreviation: 90 x 65 x 1.80 mm Profile Type: SP18 Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,030 mm high 1,100 mm deep
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
Used complete production line for yellow cheese, made by TEWES-BIS Poland. New 2019. Production line for yellow cheese, e.g. Gouda, Edam, Dutch type. Daily capacity: Processing up to 180,000 litres of milk per day. TECHNOLOGICAL SPECIFICATION (MAIN MODULES): Section 1: Preparation of cheese milk: o Milk repasteuriser with a capacity of 15 m³/h. Section 2: Preparation of cheese curds: o Cheese boiler with a capacity of 12 m³. o Hot water generator for boilers. o Process water pasteuriser (5 m³/h) with a 10 m³ tank. o Set of process pumps (whey, curd) with a capacity of 25 m³/h each. Section 3: Cheese room – Moulding and pressing: o Curd buffer tank (10 m³) with pump. o Under-mould forming device (UFP) for Dutch cheese. o Complete mould circuit (300x500x100) with cover applicator and remover. o Final pressing system: 144 pressing points. o Tunnel mould washe ...
Basic equipment: Central axle trailer chassis for 80 km/h Brake system with ABS according to EC directive 50 mm EC towing eye, clip-on shoe Tyres 285/65 R 22.5 Permissible total weight 19,000 kg Mercedes-Benz OM 460 LA engine, 375 KW at 2,000 rpm. Euro Mot III B emission standard Load-dependent control of the material feed incl. automatic scraper floor reversing Fuel tank 600 liters Radio remote control complete hydraulic drive hydraulic support legs Separate drive feed roller/scraper floor "TwinDrive" Paintwork RAL 2011 deep orange Condition of the machine The machine is in a technically and visually good condition and ready for use. New diesel engine at 10,310 hours! Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects This is not a binding offer. Subject to prior sale and technical ...
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
New meat grinder Braher P82 Main features: -Made entirely of stainless steel AISI304; - The machine complies with CE norms regarding hygiene and safety; - Unger system - with three tools: kidney, knife, grid + 1 grid gift from "MM Service" EOOD; -Neck: 82mm.; -Productivity: 250÷300kg/h; -External dimensions: 325/550/350mm.; -Weight: 39 kg.; -Power: 1.5 kW, 3N, 50Hz;
The Bottero 108F Plat Poly is a robust and precise glass grinding machine, designed for grinding and polishing flat glass edges in an industrial production environment. This used unit from 2004 works correctly and is ideal for companies looking for a reliable machine for daily edge finishing. Technical specifications: Model: Bottero 108F Flat Poly Year of construction: 2004 Machine type: Straight-edge grinder (flat + poly) Number of grinding heads: 8 Machining: Flat edge, Polished edge, Deburring, Polishing Glass thickness: 3–40 mm (typical for this model) Transport system: Powered chain conveyor with glass guide Cooling system: Water-cooled grinding sections Speed control: Variable adjustable Connections: 400V power supply, Water inlet/outlet Machine condition: Functioning well, immediately ready for use Why this Bottero 108F Flat Poly? ...
Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;
Main characteristics: For grinding chilled meat; Floor model; AISI 304 stainless steel construction; With transmission system at work; Protective plate for easy loading and plunger to push the material; Solid stainless steel auger with locking mechanism; Unger system – 5 instruments; Technical data: Productivity: 1100 kg./hour; Motor power: 5.5 kW (standard motor is 4kW); Neck: 114 mm.; Dimensions L / W / H: 450 / 860 / 1100mm.; Weight: 121 kg. The price includes a complete set of grinding tools;
Compact and reliable lifting solution for workshops and production environments The BPL Flexiheffer jib crane is an ideal solution for safely and efficiently moving loads up to 150 kg. The crane is designed for intensive daily use and offers a large working range thanks to the smooth jib arm. Technical Specifications Brand: BPL Type: Flexilifter 150‑R4‑L‑1500‑0 Year of construction: 2003 Height 2, 872 mm, width : 500 mm, length 1,878 mm Maximum lifting capacity: 150 kg, lifting stroke 1,500 mm Swing radius: 4,000 mm Construction: Steel column + swing arm Operation: Manual, smooth running Condition: Well-maintained, fully functional Connection: compressed air min. 6 bar, 700 NL/min Key Benefits Safe and ergonomic working with light to medium loads Compact design – ideal for workshops with limited space Smooth swivel movement for fast and accurate positi ...
Name: Progressing cavity pump used Manufacturer: Seepex Type: BN10 Year of construction: 1999 Material: Normal steel Drive motor: 9.2 kW operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg. Speed: 75 -430 rpm Capacity: 1.5 -12 m3H operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Protection class: 55 Flanges: DN 80 / 100 Condition: Used Tech. Documentation: No Price: On request
KIMLA BPF 2030 CNC router was built in 2011 in Poland by POLCOM Przemysław Kimla. The machine was regularly maintained throughout its service life. In 2021, the ISEL 10 bearings along with the lead screw in the Z axis were replaced. KIMLA BPF 2030 is an excellent choice for both small and medium-sized companies with a diverse production profile. The machine enables precise machining of a wide range of materials, i.e. light metals, plastics and wood. After fitting a special cutting head, it is also possible to cut parts made of rubber and cardboard. All machining processes are performed on a large work table with an ergonomic design. The spindle, driven by a high-powered motor, rotates at a maximum speed of 24000 rpm and moves in three X,Y,Z axes with feeds of 2000 mm, 3000 mm and 500 mm respectively. Tools taken from a 10-position magazine are in turn continuously measured and calibr ...
Format 1200 x 750 mm without ruler Working size 120x75cm 220V / 120 Watt / 50.60 cycles (Hz) Dim L130 x W80 x H130 cm
cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)
Number of rows: 12 0 distance between row: 45 cm Working with: 5,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head
We can offer you 4x Barmag FK6-1000V texturing machines, manufacture year 2014, 288 spindles, pneumatic yarn pusher, PU discs,airjet, unitens. Very good condition, price $215000/set FOB China.
Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
Ultra freezer, freezer, freezer used Manufacturer: NEW BRUNSWICK Type: U725 -86 Model: U9440-0001 Temperature range down to -86 ° Net capacity: 725 l 3 compartments approx. 860 x 420 x 600 mm (WxHxD) Stainless steel lining 230 V Total dimensions: approx. 1100 x 900 x 2100 mm
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
We have 2 Barmag FK6-1000V texturing machines, double friction unit, manufactured in 2014, 2x240 spindles. individual morter friction units, pneumatic yarn pusher, double W2 roller, Barmag unitens, A,B side individualm control, very good machines. price $300000/set FOB China. We also have 1 Yuejian YJ-1000 double friction texturing machine available for sale, manufactured in 2018, 2x 288 spindles, double W2 roller, PU disc, airjet, A,B side individual control, shaft drive, very good condition. price $200000 FOB China
Stand frame: approx. 742 pieces frame height: 5,000 mm approx. 394 pieces frame height: 7,000 mm Frame depth: 1,100 mm Profile: 70 mm galvanized Trusses: approx. 726 traverses Traverse length: 1,800 mm [Page] for 2 EP parking spaces per compartment Profile: 65 x 50 mm Material color: blue approx. 3,498 traverses Truss length: 2,700 mm for 3 EP parking spaces per compartment Profile: 90 x 50 mm Material color: blue approx. 440 traverses Traverse length: 3,600 mm for 4 EP parking spaces per compartment Profile: 140 x 50 mm Material color: blue
very well preserved automatic machine with/without motor reel
Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
round bread bread baking line, description: round loaf bread baking line; consisting of 1 stainless steel dosing machine brand Shadowtotal dimensions . approx. 1800x1100x1500mm; equipped with hopper and cutting machine; 400V; 1 conveyor belt, 5-storey; tire width approx. 350mm; total dimensions . approx. 6500x600x700mm; equipped with CPG induction motor; 1 stainless steel 2-piece flattener; 1 stainless steel 13-storey walkthrough proofer; tire width approx. 600mm; total length approx. 7500mm;
Bitzer Tandem with two compressors 4G-20.2Y, for TC or plus cooling Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Becton Dickinson FACSCalibur Flow Cytometer The BD FACSCalibur™ platform offers a unique modular approach to flow cytometry, allowing users to perform both cell analysis and cell sorting in an innovative single-table system. Designed to support multi-color applications, the BD FACSCalibur flow cytometer offers flexibility to support a variety of research and clinical applications.33 nm), which allows analysis of up to 6 parameters (forward scatter and side scatter and up to 4 fluorescence dyes). Year of construction 2000 Item condition: used No voltage converter & power supply available - therefore without functional test.
For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.
maximum number of results exceeded
please refine your search
